Total Price


Cart 0 Cart 0 Loading...

H-King Blue Tang (Kit) Glue-N-Go Foamboard 850mm

Generating Links

H-King Blue Tang (Kit) Glue-N-Go Foamboard 850mm


Now save save $8.00 $8.00

Special Price $19.99 $19.99

You save save $8.00 $8.00

Was  $27.99

Shipped From:
  • EU
Already Purchased
In Stock
want FREE shipping? Click here to find out more!

The H-King range of Glue-N-Go foamboard kits makes for flying fun with a huge range of different planes (and other flying objects). They are easy to assemble, easy to fly, and has exceptional value!

What better way to get the kids involved with flying than with this superb flying Blue Tang? It will make a huge impact at your local park. It's made from tough EPP foamboard reinforced with carbon fiber rods to take those little bumps and hard landings. The foam is CNC cut for a perfect fit.

The easy to follow color instructions will have the model assembled in no time. All you need to add is your choice of electronics. For outdoor use, we suggest using 2208 to 2212 (1400 to 1600kV) brushless motor, 12amp ESC, 8-inch propeller, 9g servos, and 1300 to 2200mAh 3S LiPo battery. For indoor flying, we recommend lighter equipment (see below).

• Kit version - Assembly and install your choice of electronics
• All hardware accessories included in the kit
• Requires all electronics (motor, ESC, servos, propeller, battery, radio gear)
• Durable EPP foamboard with realistic printing
• Stable flyer
• Simple to build, full-color instructions included
• Carbon fiber reinforced

Length: 890mm
Wingspan: 850mm

Required (Recommended):
1 x 2208 – 2212 - 2216 1400kV – 2600kV brushless motor
1 x 20-40A ESC
1 x 1300 - 2200mAh 3S LiPo battery
1 x 5~8inch propeller
4 x 9g servos
1 x 4CH or more Radio TX and RX

Indoor Flying Requirements (Recommended):
1 x 2205 – 2206 1400kV – 1700kV brushless motor
1 x 10-12A ESC
1 x 350~500mAh 2~3S LiPo battery
1 x 7~8inch propeller
4 x 4.5~4.7g servos
1 x 4CH or more Radio TX and RX

  • Wingspan(mm) 850.00
Upload video

Only registered users can upload video. Please, log in or register

Sort by
Most Recent Topics
* Nickname:

* Your Reply:

Please, enter the text shown in the image into the field below
*Verification Code:
Post a new Topic
* Nickname:

* Your Topic:

Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Spudnik | Verified Buyer

  • Overall
  • Value
  • Quality

Blue tang

Jul 31, 2019

Is fun....but a bit weak

David | Verified Buyer

  • Value
  • Quality
  • Overall

Fun but definitely different??

Jun 17, 2019

Very strait forward build. No problems with any of the hardware! However pusher prop was extremely loud??? Might try and put motor in front. Should also help with cg. Definitely an eye turner!!!!!!!

XionUAV | Verified Buyer

  • Overall
  • Value
  • Quality

Great Looking and Fun After Major Modifications

Aug 10, 2018

I got the tang and clown fish both shortly after they were first released. As noted by Richard, the spec'd CG is way too far back. The only way it will fly decently as spec'd is with a stabilizer. I used a Hobby Eagle A3 to start with. Same issue with the clown fish.
The prop slot arrangement is embarrassingly loud and the only way to move the CG far enough forward to make the aircraft fly well without electronic stabilization is by relocating the motor to the front. It's been determined that somewhere around 20mm to 25mm forward of the prop slot is necessary for proper flight. A 1300mAh battery worked well for me with the front mounted motor to achieve a usable CG. I used a 2213 980KV motor on 3S with a 9x4.5 prop and it works great. Super quiet as well. Some have filled the prop slot with like material and painted it to match the area.
The control surface hinges were barely attached. A thin smear of Foam TAC or UHU POR on the hinges works well. The foam is really floppy. I ran a thin, flat carbon spar from the nose over the mouth and underneath to stiffen up the front. A small CF rod was installed in the rudder to stiffen it up. While hot glue will work, I found CA worked really well and kept things clean and strong.
Bottom line is it should haven been a better designed product out of the box. But if you're willing to put in the work to mod it, it's a hoot to fly.

Richard | Verified Buyer

  • Quality
  • Overall
  • Value

Not bad but not great.

Jul 06, 2018

Build is not bad but the manual is not the best. Probably not a great first build. First flight was tough. It is very tail heavy and the suggested CG is too far aft. Very hard to control. Appeared to make very sharp turns on its own for no reason. It was later determined that that the lower mouth was flexing left and right and acting as a rudder on its own. Still looks really cool flying. Definitely needs adjusting. I used HK's recommended power setup. LOTS of power.

Neal | Verified Buyer

  • Value
  • Quality
  • Overall

Great Novelty

Jun 17, 2018

Needs better documentation, but it's from China. What's new.

Customer files
H-King Nori Manual Download [2]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags