The design team at HobbyKing ™ have been busy designing the ultimate H-style 250 frame that combines all of the best features of our most popular frames!
The H-King Color 250 Class FPV Racing Drone series frames are literally maxed out with innovative features that the racing fraternity had been screaming out for! The H-King Color Frames are manufactured from glass filled nylon which makes the frame super strong yet flexible
enough to take the everyday knocks and inevitable high-speed collisions.
The upper deck of the H-King Color frames are also manufactured from toughened nylon which has a honeycomb / ribbed pattern to reduce weight and increase durability. The upper deck also includes a camera mount for your Mobius or similar camera system along with vibration reducing damping balls to give you the best possible flight footage.
The printed distribution board (PDB) has a built in 5 volt BEC making it perfect for OPTO ESC's and for powering your other electronics etc. The PDB is easy to mount and simply slots over the molded tabs and is secured by the upper deck frame stacks.
The frame provides excellent mounting and securing points for your electronics such as, ESC mounting points, Internal FPV camera mount and the latest FPV Tx mounting solution! the frame offers a fixed upright position for your FPV Tx (up to 600mW size) in the event of a collision the load is placed on the SMA fitting rather than the PCB which could save your TX!
The arms of the H-King 250 are upswept which improves stability and provides faster forward flight, the arms also feature built in molded landing gear.
The Frame has 16x19mm and 14x12mm motor mounting options which means you can fit a multitude of motors ranging from 1704 to 2204 sizes.
• Manufactured from super strong and flexible glass filled nylon
• Mobius style upper camera mount with vibration damping
• Internal Camera mount option
• Easy fit printed distribution board with 5 Volt BEC
• Protective FPV Tx mount built-in
• ESC mounting points
• Upswept arm for improved stability and faster forward flight
• Built-in molded landing gear
• Suits 1704 to 2204 size motors
Material: Glass Filled Nylon
Frame Size: 250mm
Frame Weight: 130g (with PDB)
Frame Height: 65mm
Bolt Hole Spacing: 16x19mm / 14x12mm
H-King Color 250 frame
1 x Printed distribution board
8 x Props
4 x Damping balls
4 x Motors 1704~2204
1 x Battery 1300~2200mah 11.1V (3S LiPoly)
4 x ESC’s 7~12A
Flight Controller of your choice
Top Rahmen der wirklich was wegstecken kann, hatte
damit 3-4 richtig bse Crashs ohne nennenswerte Schden am Rahmen
Gute Investition fr Anfnger
Nice for the price. It has a built in PCB to solder the esc's and battery plug to. The PCB also has a ubec built right in. The camera mount has vibration dampening that works well and can be set up inside the frame as well.I have been in R/Cs for 30 yrs now and have had cars, boats, planes and a couple helicopters and this is my first quad but this frame seems to be nice quality and fits together nice. I used this frame, HK KK2.1 HC controller, LD power race spec 1806 motor/esc kit. nao tech 1800mah 3s battery. (all US warehouse) The frame took some modifying to get the Hard case controller in but I was able to use it (if you have limited build skills then you may want to use a smaller controller. After building and setting up this quad it flew very stable nice on the first flight. Nice frameI just purchased this one, colour is darker than picture, pretty dull.
Frame seems pretty flimsy, will comment further once it's together.
Cheap enough I suppose.Great little frame, very sturdy, with a good amount of room. Hard to beat for the price.
https://youtu.be/0i-jJ7ixMjYthis does not tak kk 2.0 board and the frame is very poor quality. really dont recommend this at all"Ottima frame, leggera e resistente, il pdb intuitivo e facile da saldare, possibilit di montare motori fino a 2206, eliche da 5" a 6", consiglio viti da 0.8- a 1.0 per fissagio motore, io la uso con motori Elite 2204, Esc Afro 12 V3, eliche 5x3, FC Naze32. Consiglio batterie 3s con le 4 s un po' irrequiteo.these things are AWESOME!!, I bought 2 of these for my kids whom now fly ..LOL
and they have had there share of trees! knocks and hits! and there pretty good !! a few dents! but nothing major! reminds me of a TRAXAS Slash for the "AIR"...LOL
so I ended up buying myself 2! one for FPV racing one for farting around with my kidz!!
they have a RED and a Blue one "o'l man here has a Black one hehehe...Stealth!!..LOL
but good frames for starting out, tough and well thought out, but get extra Bolts for Motor mounting options, in case a Motor has a Thin bottom plate etc. and little "Washers" will help for bottom so Screws wont dig into the Plastic .Klasse Rahmen, leicht aufgebaut und sehr stabil mit viel Platz fr Zubehr. 6"-Props ist absolute Schmerzgrenze, grer passt nicht. Fliegt sich gut mit Turnigy Multistar 2206 2150KV, Afro 12amps, Gemfan 5030 und 1000mAH 4S Lipo.Really nice frame, beautifully packed, quality is good and feels very strong, same material used as in Dji hex arms like the 550, I love the up swept arms and how easy is to set all electronics with the included pdb, overall another hit from hobbyking, for the price would be a joy to have all of them, excellent.