Total Price

$0.00

Cart 0 Cart 0 Loading...

H-King (PNF) Chance Vought F4U Corsair 750mm (30") w/6 Axis ORX Flight Stabilizer

Generating Links

H-King (PNF) Chance Vought F4U Corsair 750mm (30") w/6 Axis ORX Flight Stabilizer

Price:

Now save save $0.00 $0.00

$93.99
QTY:
Shipped From:
  • USA
  • Global
Already Purchased
ETA: No ETA At This Time [ ? ]
Status:
Backorder
SKU:
9325000040-0
want FREE shipping? Click here to find out more!

This H-King version of the classic F4U Corsair warbird is manufactured in a superbly finished EPO foam in an authentic navy color scheme with all the decals pre-applied. The Corsair is a very stable flyer in its own right, for most pilots, the gyro is not necessary. However, for beginners and low hours pilots, a 6 axis ORX flight stabilization system is supplied which makes it even easier to fly. The stabilization system utilizes a 32bit MCU and a 6-axis digital gyro for ultra-fast control response, it can be switched from beginner to expert mode as your experience grows.


The F4U Corsair first saw service in World War ll and then the Korean war. It was designed as a carrier-based aircraft and entered service with the US Navy in 1944, it was also the first American fighter to exceed 400mph. The H-King F4U Corsair depicts "White 29", the mount flown by Lt Cmdr Ira C Kepford of fighter squadron VF-17 the "Jolly Rogers". It carries the famous Jolly Rogers skull and crossbones nose art as well as Kepfords 16 Rising Sun victory markings.


There is little to build with the H-King F4U Corsair. It comes 97% pre-built with the motor, ESC and servos pre-installed. All you need to do is fit the main wing, tail assembly, and plug in the main landing gear. You will also need your own transmitter, receiver, and flight battery.


It has the power to do all the maneuvers required for a World War II fighter and looks fantastic in the air. The stabilization system makes it very smooth and easy to fly and its small size is perfect for flying in local parks, large indoor areas, or the local flying patch.


Features:
• Authentic scale detail
• Plug-N-Fly
• Outstanding flight characteristics
• Supplied with an ORX flight stabilizer with 2 different flight modes (Beginner and Expert)
• Efficient 3 blade propeller
• High torque brushless motor
• Complete high-quality hardware package


Specs:
Wing Span: 750mm (30”)
Length: 610mm (24”)
Weight: 420g
Power to Weight Ratio: 1:1
Motor: 2408-1200KV brushless
ESC: 20A brushless
Gyro: Intelligent 6-axis with 2 flight modes (beginner-expert)
Servo: 9g x 4


Required:
5ch or more transmitter and receiver system
11.1V (3S) 800mAh or 7.4V (2S) 1000mAh 30C LiPo Battery (JST Connector)
Suitable LiPo charger


Note: The user manual can be found under the “Files” tab above.


Important Notice: The first batch of the H-King F4U Corsair has been delivered with the incorrect 6-axis gyro fitted, the correct, replacement gyro is included separately in the box. To change the gyro please follow the 4 simple steps in the "Gyro Replacement Instruction Guide" which are attached under the "Files" tab.


Spares: Spares for this model should be available late spring 2021.

  • IC/2:Elec Electric
  • Motorsize(diam-or-cc) 24.00
  • Wingspan(mm) 750.00
  • Length(mm) 610.00
  • H-King (PNF) Chance Vought F4U Corsair 750mm (30") w/6-Axis ORX Flight Stabilizer - Flight Review
  • EASY ASSEMBLY, FLY AND FOLDING WING 'MODIFICATION' !!! HOBBYKING F4U CORSAIR | ERC FLIGHT TEST
  • SMOOTH FLYING with A SMASHING GROUND LOOP !!! HOBBYKING F4U CORSAIR | FLIES AWESOME
  • H•King 750mm F4U Corsair - With Gyro Details
  • Blown Away!
Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Tony | Verified Buyer

  • Quality
  • Overall
  • Value

Cheated!

Feb 09, 2021

I've given the one star rating as I have yet to receive my corsair as I was foolish enough to attempt to buy it from the eu warehouse. Ordered on 29th January I am still awaiting delivery with my order marked as "processing ".Maria from hobbyking informs me that as far as she is aware at the present time there is no shipping available from the eu.Despite this even today the item is still listed as available!.

Tim | Verified Buyer

  • Quality
  • Overall
  • Value

Fantastic for a 750mm plane

Feb 09, 2021

Pros:
Plane is very well detailed
Build was easy
Flew fantastic in 10-15mph winds
Gyro stability
Cons:
Battery compartment height is very tight for the Turnigy nano-tech 850mah 3S 25~40C Lipo Pack. Its 25mm in height and I had to pull out the velcro to get it pushed all the way to the front. The remaining glue is still a bit of a problem.
I may suggest the Zippy 1000mah 3S pack since it is readily available.

Jason | Verified Buyer

  • Quality
  • Overall
  • Value

Very Disappointed.

Feb 07, 2021

Finally got to fly the new F4U Corsair.
On 2s battery she has a nasty tip stall. But the the 3s in she has plenty of power to pull out of any kind of trouble u might find yourself in.
Unfortunately I was disappointed in the ORX stabilizer. Trimmed out with ORX turned on, she flies pretty good. .
But as soon as turn the ORX off she nose dives fairly hard and almost made for a bad day.
Flip the ORX back on and the Gyro starts a porpoise that last around 5 seconds.
And Yes, I did replace the ORX as instructed
Overall I am disappointed with the plane because of the trim issues. Especially with the ORX performance.
The P-51 McSwine is much more stable and has no problems with the ORX.

Jason | Verified Buyer

  • Quality
  • Overall
  • Value

Very Disappointed.

Feb 07, 2021

Finally got to fly the new F4U Corsair.
On 2s battery she has a nasty tip stall. But the the 3s in she has plenty of power to pull out of any kind of trouble u might find yourself in.
Unfortunately I was disappointed in the ORX stabilizer. Trimmed out with ORX turned on, she flies pretty good. .
But as soon as turn the ORX off she nose dives fairly hard and almost made for a bad day.
Flip the ORX back on and the Gyro starts a porpoise that last around 5 seconds.
And Yes, I did replace the ORX as instructed
Overall I am disappointed with the plane because of the trim issues. Especially with the ORX performance.
The P-51 McSwine is much more stable and has no problems with the ORX.

Ronny | Verified Buyer

  • Quality
  • Overall
  • Value

Clear recommendation!!!!!

Feb 05, 2021

Top Model for the Price
Flown on Zippy 35c on XT 30 3s 1000mAh
just fits in.

Noel | Verified Buyer

  • Quality
  • Overall
  • Value

Out of the 750mm I have:Tempest-Hurricane-P51-Corsair...the Corsair is thumbs down!

Feb 04, 2021

The HK Corsair F4U is a 'Dog' of a plane for me. Today I had 12 flights with 1 successful. I am so glad I was on sand & not hard ground.(2 propellers broken in 2 days.
I believe the problem (probably apart for the pilot writing this) is the model has a faulty elevator. The control horn side works fine but the other side only moves half as much. I have tried gluing it in etc. but this side is weak & flimsy.
It will also now become be my first (out of 22 models I own) a display model.

Noel | Verified Buyer

  • Quality
  • Overall
  • Value

Unbixing-Assembly-First flight... i was blown away!!

Feb 02, 2021

The aircraft arrived yesterday just under a week from ordering ( you have to be quick) very east build , great detail & quality plus swapping the stabiliser and it was ready to go for the first flight... or so i thought. Stuart, you did not explain about the wind conditions & trying to fly a 750mm in it ... LOL!
It was a fun try out with the sand at the beach almost blasting the paint off.
https://youtu.be/LPWL_6NOGAc
A new maiden thus week in hot conditions for this great aircraft

Paul | Verified Buyer

  • Quality
  • Overall
  • Value

cg placement

Jan 31, 2021

Early days of assembly using 1000mah 20-40c nanotech 3s airsoft, xt30 connectors,70gms and Turnigy i6 rx. to achieve 45mm back from wing leading edge cg I have removed the front false engine cylinders and added 65gms of peel and stick weights, painted up the cylinders and replaced them now 6mm further forward due to weights. No ordnance, no wheels, no drop tanks yet.

Paul | Verified Buyer

  • Quality
  • Overall
  • Value

cg placement

Jan 31, 2021

Early days of assembly using 1000mah 20-40c nanotech 3s airsoft, xt30 connectors,70gms and Turnigy i6 rx. to achieve 45mm back from wing leading edge cg I have removed the front false engine cylinders and added 65gms of peel and stick weights, painted up the cylinders and replaced them now 6mm further forward due to weights. No ordnance, no wheels, no drop tanks yet.

Customer files
H-King F4U Corsair User Manual Download [3]
H-King F4U Corsair Gyro Replacement Instructions Download [170]
TX16S model profile H-King Corsair, from Stuart. Download [9]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories