New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

H-King Rattler 1/8 4WD Buggy V2 (ARR) with 60A ESC

H-King Rattler 1/8 4WD Buggy V2 (ARR) with 60A ESC

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$175.84
Status:
In Stock
SKU:
9596000095-0
WANT FREE SHIPPING? Click here to find out more!

Get ready to be bitten by the Rattler! The H-King Rattler 1/8 4WD Buggy is a fantastic value for money 1/8 basher for anyone who wants some land-based fun. Because everything is so super simple on this buggy it will take a lickin' and come out kickin' for hours and hours. It is made from lightweight fiber reinforced plastics which make it quick off the mark and able to handle the rigors of even the most enthusiastic basher.

There are so many quality features on this buggy we couldn't believe the price ourselves; not only is it strong but it has metal gear diffs front, centre and rear, pivot ball suspension all round, threaded adjustable oil filled shocks, a dust-proof receiver box that also houses the ESC and servo to help keep your electronics in tip-top condition and even a steel spur gear.

With its soft thick pin tyres, this buggy is made for the dirt or grass surfaces you find in parks or vacant blocks of land. If you've got a patch of grass or dirt nearby and your into fast fun with a few bumps and jumps thrown in for laughs then this is the buggy for you. 


Features:
• Now with more powerful 60A ESC
• High torque 4 Pole, 2700KV brushless motor with high strength magnets
• High torque 9kg servo
• Sealed front and rear metal gear diffs.
• Pivot ball suspension all round
• Adjustable oil filled shocks
• Adjustable camber and caster
• Quick detach battery system
• Dustproof box for ESC, servo and receiver
• Lightweight reinforced composite chassis
• Active Rear Toe system

Specs:
Length: 460mm
Track width: 270mm
Height: 150mm
Wheelbase: 325mm
Weight: 2.15kg
Motor: 540 size sensorless 2700KV 4 Pole
ESC: 60A brushless
Servo: 9kg steering
Wheel size: 110x55mm
Wheel hex: 12mm
Battery Tray Dimensions: 142x46x24mm (MAX battery size)
Battery Connector: XT60 Male

Required:
2-CH Radio transmitter and receiver
4 x AA batteries for transmitter
2S-3S 5000mAh lipoly battery
Female XT60 or HXT 4mm to XT-60 Battery Adapter (subject to battery type)
LiPoly Battery Charger

  • SKU 9596000095-0
  • Brand H-King
  • Capacity (mAh) -
  • Shipping Weight 3113.3000
  • Length 585.00
  • Width 195.00
  • Height 350.00
  • H-King Rattler 1/8 4WD Buggy V2 with 60A ESC
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very nice for it's money. Just by adding a powerfull 30mm fan to the electronics box the esc isn't going on high temp cutoff, which is quite ok for 32C ambient temperature. I use it with a 3S batt and it's surprisingly powerfull. Mine also was not breaking by default and the manual H.King posted isn't working for the V2 ESC. But now it seems that many parts aren't available and I'm not talking about stock. It seems they removed completely the dogbones and tires from the site. So if it breaks or wears out its tires it goes on the shelf.
While good little buggy I cannot recomend it until it gets proper esc with manual for the 3S it is supposedly made for and parts availability cause it's an RC, you need parts to keep it running.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Very nice for it's money. Just by adding a powerfull 30mm fan to the electronics box the esc isn't going on high temp cutoff, which is quite ok for 32C ambient temperature. I use it with a 3S batt and it's surprisingly powerfull. Mine also was not breaking by default and the manual H.King posted isn't working for the V2 ESC. But now it seems that many parts aren't available and I'm not talking about stock. It seems they removed completely the dogbones and tires from the site. So if it breaks or wears out its tires it goes on the shelf.
While good little buggy I cannot recomend it until it gets proper esc with manual for the 3S it is supposedly made for and parts availability cause it's an RC, you need parts to keep it running.

Here a manual for programming the ESC. https://hobbyking.com/media/file/109613889X1090561X58.pdf

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Here a manual for programming the ESC. https://hobbyking.com/media/file/109613889X1090561X58.pdf

the new ESC is a box....withour fan!
its get hot very fast and easily on 3S, so does the motor as well. in 3S the speed is insane!
i will try it on 2S also and repost, however i already order a nes hobbuwing 60A Waterproof esc so that i dont have to worry about smokes :-)

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

the new ESC is a box....withour fan!
its get hot very fast and easily on 3S, so does the motor as well. in 3S the speed is insane!
i will try it on 2S also and repost, however i already order a nes hobbuwing 60A Waterproof esc so that i dont have to worry about smokes :-)

I'm impressed by the hardware. However, a manual for the ESC would be required, as the break is by its default setting almost not working. I figured out how to readjust, now its breaking well. However, it would be nice to also program the remaining parameter such as punch etc.

trending_up Value:
verified_user Quality:
playlist_add_check Overall:

I'm impressed by the hardware. However, a manual for the ESC would be required, as the break is by its default setting almost not working. I figured out how to readjust, now its breaking well. However, it would be nice to also program the remaining parameter such as punch etc.

Quality and build is very nice. However the maximum break force is very weak by default. However, for the ESC programming, there is no description. So it took me quite long how to find out how to program and adjust the break. Finally I succeeded but it would be still nice to have a full description to also adjust the other parameters.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Quality and build is very nice. However the maximum break force is very weak by default. However, for the ESC programming, there is no description. So it took me quite long how to find out how to program and adjust the break. Finally I succeeded but it would be still nice to have a full description to also adjust the other parameters.

Customer files
ESC Manual Download [5]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save