Register

Product Finder

Settings

Useful links

 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global
  • USA

hexTronik 16gram Brushless Outrunner 1700kv

hexTronik 16gram Brushless Outrunner 1700kv

QTY:

Now save save $0.00 $0.00

$9.96
Rating:
Stock:
Weight:
45 g
SKU:
HXM2211-1700

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

Small brushless outrunner.

Kv: 1700rpm/v
Weight: 16g
Voltage: 7.4v (2 cell Lipo)
Current: 6A
Suggested Propeller: 8x3.8
Thrust: 300g+

 

 

Product
Specifications

Additional Information

  • SKU:
    HXM2211-1700
  • Brand:
    No
  • Weight(g)
    45.00
  • Length
    65.00
  • Width:
    40.00
  • Height:
    40.00
  • Kv(rpm/v)
    1700.00
  • Max Currents (A)
    6.00
  • Power (W):
    0.00
  • Length B (mm):
    24.00
  • Can Length D(mm)
    8.00
  • Max Voltage(V)
    7.00
  • Shaft A(mm):
    2.00
  • Unit Weight (g):
    16
  • Diameter C(mm)
    22.00
  • Total Length E(mm)
    33.00
  • Resistance (mh):
    0.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Perfecto equilibrio peso-empuje.
No encontrareis un motor de este tamaño que tire tanto.
Algo delicado, recomiendo proteger el bobinado con epoxi
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bu motoru 200gr 3d i?in ald?m, denedikten sonra fikrimi yeniden yazaca??m.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
We use them for our the shockys of our kiddies in the club. Nice little motors and reliable. Recommend.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little motor! Running it with an HK 6amp esc / .5a ubec and a 350mAh 2c 25s lipo. Plenty of power for my 135 gram mini FFF eagle with a 28 inch wing. Good fun!!!
Check XXXTechRC on YouTube for flight video.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bom motor para pequenos
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just tested this for my 90cm cessna. It pulls 240g static on my bench and the setup is as follows: Turnigy 2S Nanotech 370mAh, Plush 6A ESC, GWS EP-7035, unbalanced and wobbly. Still a solid 230g with the speed controller getting warm to the touch. I think while flying the current will be less because the prop won't be stalling so much as on my bench. Very nice little motor! I think I weighed it around 18g. The wires look brittle so solder them and leave them be.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
put on 210grams ready to fly low wing plane, with 610 rino lipo 2 cel and 12 amp turnigy ESC and 7x3 gws DD. she flies great, cold all time, no vertical, but very fast.
The winding is to loose!!! maybe think to rewind
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
During bench test on 3S, a small wire burnt. No reparation possible. A bit disappointed.

The hex screw for the support goes with a 1.5mm wrench. The screw holding the shaft is for a 0.7mm wrench! Difficult to find!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
tres bon moteur, mis sur cone 20mm axe de 2mm avec helice 8X4.5, et accus de 2s en 370mah lipo pour motoriser un canary ,cest le moteur quil faut pour ce planeur
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor when it is work, wound with horrible wire, bought two and both of them broke on their own. ( i got them both on a pusher flying wing, both wire were glue down with hit glue and both of them break in several places )
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.