Country
United States
 
Shipped From:
  • UK
  • US (East)
  • AU
  • EU

hexTronik 24gram Brushless Outrunner 1300kv

hexTronik 24gram Brushless Outru...

HexTronik 24gram Brushless Outrunner 1300kv


Specs:
Kv: 1300rpm/v
Max Load:  7.5A
No Load Current: 0.7A
Suggested Lipo: 3 cell 11.1v
Thrust: 400g+
Suggested Prop: 8x3.8
Weight: 20g
...
HXM2730-1300

Now save save $2.28 $2.28

Special Price $8.29 $8.29

Now save save $2.28 $2.28

Was  $10.57

45g
HXM2730-1300


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Overview

HexTronik 24gram Brushless Outrunner 1300kv


Specs:
Kv: 1300rpm/v
Max Load:  7.5A
No Load Current: 0.7A
Suggested Lipo: 3 cell 11.1v
Thrust: 400g+
Suggested Prop: 8x3.8
Weight: 20g

*Motor comes with prop saver and mount.

*Please note. This motor may come in Silver OR Blue.

 

Specs

Additional Information

  • Blade Count:
    N/A
  • Speed (Sec/60deg):
    No
  • Torque(kg)(min. 0.01kg)
    No
  • Diameter X(Inch)
    No
  • A(mm):
    No
  • B(mm):
    No
  • C(mm)
    No
  • D(mm)
    No
  • E(mm):
    No
  • F(mm):
    No
  • SKU
    HXM2730-1300
  • Weight(g)
    45.00
  • Length:
    65.00
  • Width:
    40.00
  • Height
    40.00
  • Kv(rpm/v)
    1300.00
  • Max Currents (A):
    7.50
  • Power (W):
    0.00
  • Length B (mm)
    30.00
  • Can Length D(mm)
    7.00
  • Max Voltage(V):
    11.00
  • Shaft A(mm):
    3.00
  • Unit Weight (g)
    20
  • Diameter C(mm)
    27.00
  • Total Length E(mm):
    42.00
  • Resistance (mh):
    0.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

I fitted four of these onto an F330 quad frame with 12a Tarot mini escs and a cc3d atom. 8040 props, 3S 1300ma. Very light setup for such a frame - under 350gm lipo. So far so good.
Great little motor for scratch-building foamies. Only 4/5 due to the lack of mounting screws included, but for the price, these little things are fantastic!
everyone knows the amazing blue wonder, it's a great motor for slowflyers and trainers. also great for the older Flitetest models
Fabulous little motor. Used on a prototype depron 31" wing span little Stik with apc 7x5 prop using a ali prop spinner and 20A ESC. Motor drawing 8.5A at 12.2V 1000mAh zippy lipo. Motor runs cool. Never had so much fun with any model.
Good motor got it on my Ft scout works fine but the quality is poor
Received motor in good order and short time. When I went to put the bullets on the leads I noticed that the leads are very stiff and I had a difficult time getting them to go where needed in the FreeFlight model I was working on. I wish that the leads had a better quality silicone covering so that they would be more pliable.

Randy
Habe von diesen zwei gekauft , klein und viel kraft, tolle verarbeitung.
GWS 8040 prop, 2S 1000 mAh 10C (very well used battery), static, after 30 sec at full throttle:
3.9 Amps
6.7 VDC
26 Watts
6350 rpm
I did not measure static thrust, but I mounted this on my Pico Stick (7.1 oz) and it wants to pull out of my hand vertically. I've not yet flown it.
bom motos para pequenos avioes
Un motor cojonudo , da bastante empuje para lo pequeo que es y no consume mucho , con una 1300mah 3s estuve haciendo vuelo colgado de la hlice 25 minutos. asi que lo que comiendo , lo nico malo es que al final se acaban rompiendo los bobinados por la parte donde salen los 3 cables aunque se puede rebobinar facil. pero si es para un avin en el que dejar el motor fijo y no lo tocas no se va a partir por ah nunca.
View all reviews
Video
Upload video
File

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
243824341X917573X24.jpg download now [73kb]

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.