New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

hexTronik PRO 80A BESC w/ PC Programmability

hexTronik PRO 80A BESC w/ PC Programmability

Discontinued Product

Please continue searching for a similar product.
SKU:
HXT080A
WANT FREE SHIPPING? Click here to find out more!

Speed Controller Features
High rate (10 KHz) switching (PWM)
3 to 6 Li-poly cells with receiver.
Dynamic braking ensures prompt prop folding.
BEC (2.0A) provides power to receiver and servos.
Over temperature protection.
User programmable Features.
Low-voltage protection - Programmable
Cutoff can be programmed for motor stop or reduced power.
Brake Type.
Throttle Range.
Timing Advance.
Safe power onarming program.
Low torque ?soft start?prevents damage to fragile gearboxes.
Auto shut down in 4sec after signal is lost or radio interference becomes severe.
Microprocessor controlled.
Programmable rotation.

A very high quality BESC.
Comes with a full 12 month warranty!

Specifics;
Max Load : 90A
Max Voltage : 6 cell 25v
BEC: 3A
As with all BESC using over 3cells, we urge you to dissable the BEC and use a seperate BEC or UBEC to power the Rx. This is the safest option.

 

 

  • SKU HXT080A
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 98.0000
  • Length 0.00
  • Width 0.00
  • Height 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Excelente variador. Lo vengo utilizando desde hace tiempo y no me ha dado ningn problema. La relacin calidad precio es realmente buena.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelente variador. Lo vengo utilizando desde hace tiempo y no me ha dado ningn problema. La relacin calidad precio es realmente buena.

very good product

76A with het 2w25 and 4S

need a good cooling , i add a heat sink hyperion glued with artic silver

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good product

76A with het 2w25 and 4S

need a good cooling , i add a heat sink hyperion glued with artic silver

This controller had a problem when it arrived. At start up and shut down when the motor is turning very slowly it will shudder, turn clockwise, then turn counter clockwise very rapidly for about 2 seconds making a loud sound. Could send it back for warranty but shipping costs inhibit that.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This controller had a problem when it arrived. At start up and shut down when the motor is turning very slowly it will shudder, turn clockwise, then turn counter clockwise very rapidly for about 2 seconds making a loud sound. Could send it back for warranty but shipping costs inhibit that.

I have bought this ESC, but no brings USB connector

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have bought this ESC, but no brings USB connector

J'ai utilis ce contrleur sur un calmato60 et au troisime dcollage celui-ci a pris feu. Heureusement l'avion tait encore au sol, pas de casse mais el contrleur est mort. Le courant maximum tait de 40 ampres.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

J'ai utilis ce contrleur sur un calmato60 et au troisime dcollage celui-ci a pris feu. Heureusement l'avion tait encore au sol, pas de casse mais el contrleur est mort. Le courant maximum tait de 40 ampres.

Pues mi experiencia es mala, lo monte en un angels 50 de sebart,motor Roxxy 5055/08,helice 15x8:el motor puede consumir hasta 50A segun el fabricante.

empieza a funcionar bien, pero a los 6 minutos de vuelo doy gas a tope y se para el motor, empieza a salir una rafaga de humo,la suerte es que pude aterrizar y el variador completamente quemado.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pues mi experiencia es mala, lo monte en un angels 50 de sebart,motor Roxxy 5055/08,helice 15x8:el motor puede consumir hasta 50A segun el fabricante.

empieza a funcionar bien, pero a los 6 minutos de vuelo doy gas a tope y se para el motor, empieza a salir una rafaga de humo,la suerte es que pude aterrizar y el variador completamente quemado.

Use this esc with a seperate UBEC on a 5055 SK motor which pulls 60A in my fms p-51 on 4s and it comes down slightly warm. Great esc!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Use this esc with a seperate UBEC on a 5055 SK motor which pulls 60A in my fms p-51 on 4s and it comes down slightly warm. Great esc!

This is my first bad experience with a product from Hobby King. It was working fine, after a few tests I plugged my 5S pack and it started to fry...don't have a clue why.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my first bad experience with a product from Hobby King. It was working fine, after a few tests I plugged my 5S pack and it started to fry...don't have a clue why.

I run this ESC in a bh P51 with 50-55(600)kv 5S-3700 Rhino 20C with 13x10 awsome como

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I run this ESC in a bh P51 with 50-55(600)kv 5S-3700 Rhino 20C with 13x10 awsome como

I use this ESC multiplex mentor,very good,thank you hobbyking.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this ESC multiplex mentor,very good,thank you hobbyking.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!