HK-2 Aerobatic Aircraft EPO Crash Resistant Fuselage and wing
Made from super resilient EPO foam and resembling a CAP232 or Edge, this 3D plane is great fun to fly and it''s stiff wing and fuse structure make it a solid 3D performer.
The RTF includes a motor, servos, esc and prop. There is no glue required to build this plane. All tail and wing pieces slot and plug together tightly to create a strong airframe.
Fuselage length: 1106mm
Wing Area: 27.3dm2Flying Weight: 960gWing Load : 35.16g/dm2Power system : Brushless motorPropeller : 13x4in
Included ;Motor : Brushless outrunnerESC : 30AAirscrew : 13x4inServo : 4pcs
Battery : 11.1V 1800mah 20CYour own TX & RX
Good plane, but not glued good, a lot of gaps. ESC earned only after the installation costs at the maximum of throttle channel.
, , , , .
Je le commande ds que les lipo sont dispo.....buen vuelo, utilizo motor turnigy 28XX 2200 mah, lo unico malo es el tren de aterrizaje, es un poco debilEquipped with a 2200mAh 20C battery (190gr.) the CG is Ok and the total weight is 1.130gr. The absortion with the std 13X4 prop is 28 Amp and it flies well even it can't climb up vertically. I prefer using a 12X6 propeller (the absortion is 27 Amp) because it flies better at some speed. The landing gear can easily be damaged in non soft landings (some speed and throttle can help).
A honest sport-aerobatic plane for a very good price.
Very good plane, beautiful, and the price.......best off
thanks HKsuper avion.mont en 20 minute a peine.tout est fournie helice moteur controleur servos.
le train d'atterissage ma l'air un peu souple mais on verra.par contre attention si vous prenez la livraison en 3 jours car il y a des frais de douane obligatoire de 56 pour la france.mais il en vaut le coupvery nice airplane good fly fast shippin.i use zippy 2100 30-40c and i fly 12min.the alevator need small movementvery nice airplane good fly fast shippinAs for this airframe, assembly is easily, and strongly made.
I think it is just good for the practice of the stunt.
I want power a little more as for the regrettable one.I am an aero engineer and here are my comments:
The cg is very back making it very unstable.
It needed a considerable down thrust.
The landing gear is soft and it needs support.
The following is well deployed by the other lads.:
The elevator and rudder need the minimum movements.