HK-500 Flybarless DFC Rotor Head Assembly

• Overall
• Quality
• Value

FBL convertion

Dec 09, 2016

12/08/2016, I recived my package in 4 days after ordering it. Just getting started with the FBL conversion and after removing the old fly-bar head to swap out for the new FBL head I noticed right off that the main shaft that came with the FBL set-up was too short. So I will use the old stock main shaft. ...........to be continued, keep checking back for progress notes!!

• Overall
• Quality
• Value

Customer Rated

Feb 27, 2016

unfortunately i cannot recommend this product :(

i have had some spare parts lying around from my crash helicopter and i could create one functional rotor head out of this crap...

the blade grips were wrong machined in a curious way. on one side of a single grip (not two different ones!) it has 10mm notch and on the other side 9mm.
rex500 blades have 10mm blade root and so the grips were useless and went into trash...

all ball joints, except the dfc ones, were dramatically out of tolerances and i had to use my own ones.

the screws are just normal ones without shaft, so be careful when tightening the dfc arms. i replaced the screw to align ones and it fits much better. with the hk screws it tended to seize, may be they were bended or whatever.

some ball bearings directly went into trash, they felt like sand inside.

both thrust bearings were ungreased.

the feathering shaft screws had too much loctite and were very hard tightened. one of them was really hard to open, i nearly broke my tools.

hobbyking refunded the article price into bonus points BUT costs for customs and transport are gone...

• Overall
• Quality
• Value

Customer Rated

Apr 17, 2015

Ottima qualita'. compatta e completamente assemblata. vivamente consigliata. Ho trasformato il mio vecchio trex 500 con testa in plastica e flaybar, in un gioiellino moderno, non c' piu' nessuna vibrazione.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 10, 2015

Very strong dfc head for my hk 500gt

• Overall
• Quality
• Value

Customer Rated

Mar 22, 2015

Tried to fit it to an HK 500 MT. It does fit, the head is well made, BUT the geometry is all wrong due to the shortened shaft. The supplied servo linkages are too long and even if shortened the swash needs to be positioned at the lower end of the shaft in order to get the blades at 0 degrees pitch.
Looks as though it was originally designed to swap with the standard flybar head straight onto the standard shaft. Then some backroom wizzkid must have decided that a shorter shaft was a good idea but forgot to adjust the length of the links from swash to blade grips to work with the new shaft.

• Overall
• Quality
• Value

Customer Rated

Dec 14, 2014

I upgraded my HK-500 with this head. My build is for FPV so I'm using NAZA-H to make visual to goggle transitions easier. I am not a 3d flyer but am an avid FPV nut with 100's of hours flying FPV fixed and rotor wing. Once the NAZA-H was dialed in the platform is extremely smooth yet very responsive. I got hit by Y-copter today and it took out my tail rotor and ... you know the rest. So here I am looking to buy another one of these but the damn things are out of stock again. Well worth the wait though.

• Overall
• Quality
• Value

Customer Rated

Oct 17, 2013

Awesome machining on the head, beautifully made.
Everything works and fits ok. Did the rebuild as per the norm, regreased and locktighted the nuts and bolts that need it.
Two problems that kill the rating a bit.
1 The supplied shaft is too short for my HK 500GT. Used the shaft from the old head assembly and it works well.
2 The control links to the servos are too short. Had to make up a set specially for this assembly.
Besides those two points, excellent value for money. Well done again Hobbyking!

• Overall
• Quality
• Value

Certified Buyer Rated

Oct 13, 2013

zwar nicht mehr lieferbar aber hmm

• Overall
• Quality
• Value

Customer Rated

Sep 11, 2013

have set this up with ZYX gyro on HK500CMT, had to change ends on the three servo to swash links to the shorter 600 type. the Swash bearing has too much play but it still flys well. will have to replace at some stage.

• Overall
• Quality
• Value

Certified Buyer Rated

Jun 08, 2013

Spindle not long enough Blade holders lock up.