New for 2008 is the Sukhoi SU-31.
A fantastic quality plane which builds in 2-3hrs.
Powder Coated and toughened landing gear
Scale fiberglass cowl
Spats factory painted
Large wing area for low wing loading.
Long fuse for stability
Direct bolt in for most outrunner motors (Turnigy)
Magnetic canopy latch
Fuselage Length: 747mm (29in)
Wing Span: 941mm (37in)
Wing Area: 14.8dm2 (229.3in)
Flying Weight: 450g - 540g (1lbs - 1.2lbs)
Servo: 4 9g micro required
Motor: TR2217/16 OR TR2217/20 (.10 class)
Prop: 10x4.7 to 11x4.7 depending on motor.
Battery: 1800 to 2200mAh 3S1P
Read about our build log;
*This item is small enough to order 2pc at a time.
Great little plane, can fly with very small motor. This one flyes with FC 28-12 and 1000mah battery. Servos are HTX 500 in wings and HTX 900 on rudder and elevator. Total wight are around 530-540g and power is 120-130W. Balances great with this setup, but maybe the motor is 6-8mm to farout from the cowling.
http://www.youtube.com/watch?v=pw6dPgxfRWw&feature=relatedHigh quality great looking airplane, received many good comments for the looks of this plane. Went together perfectly with no problems, using a TR 28-30B 14A 1050Kv Brushless Outrunner on 3 cell 2100 HC batterys and is a ballistic missle. I havbe been flying this plane for about 6 months with no problems, Hice job Hobby City
This is a grat plane. I own also de Extra300, and the cap232 from this series. They looks nearly the same like the famous Hyperion Models.
I use following equipment:
Motor Turnigy 2217/16 with 10*5.5 APC Style Prop
40A Super Simple Esc
4 x HXT900 Servos
2200 Zippy Lipo wth a flightime of around 10 minutes.
For good flying conditions, you must change the cg to forward othwerwise the plane stall very quickly.
Great build. flying weight 750grms. added 30grms to tail for CofG. used 3s1700, tp 25 speedie and tp A2409-18. used HXT900 servos. all from HC. Flies great and all works well together with 10 X 5 eprop.Great finish. Could do with a little better hardware (linkages). Used HXT900 on all surfaces from HC. Used TP_w25A/4860 25A Brushless ESC and A2409-18/5499 Outrunner TowerPro with a 10X5 eprop. Had to add 25g in tail for CG.all up weight 740g
3s1700This was my first order from a company that is in a different country. I am very impressed with the service and quality of the products i received. it took under five days for it to get to California in the United States. it can take five days to send a letter across the USA.
The Sukhoi i ordered came with no wrinkles in the covering and the wood is a great quality. Great job!! I highly recommend this plane and Hobby city and will order again!This plane needs a KD A22-20L with 9/6 APC style prop to be a rocket.Please try this set!jvfdvsaz http://hlhmrqkq.com inrassuu caeecgag <a href="http://zfmbteui.com">udniparh</a> [URL=http://vapnnadm.com]xobninjz[/URL]Box review (yet to fly) I think is a really great model, and fantastic value.Build quality and covering cannot be faulted. Looks very practical
with F/G cowl,and strong U/C. Look forward to flying it.Full marks H.City
This is my first balsa plane from UH. And i am impressed by the quality and make. Finishing is neat and relatively easy to assemble