Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

HKPilot Power Module with XT60 Connectors and 6 Pin 150mm Cable

HKPilot Power Module with XT60 Connectors and 6 Pin 150mm Cable

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
42 g
SKU:
9387000032-0

Combine

essential items and
acc
Product
Description

The HKPilot 2.5 Power Module incorporates both a way to power your HKPilot and accessories and report battery voltage and current to the HKPilot, this can be viewed in the HKPilot’s stored logs or live with a telemetry radio. All thru a single and tightly included 6-pin cable that directly matches the HKPilot’s connector. The on-board switching regulator outputs 5.3V at a maximum of 2.25A, and can be used up to 18 Volts (4S LiPo) and at a maximum of 90 amps. The Power Module is ready to use with XT60 connectors pre-fitted, and shrink wrapped for protection.

Note: The Power Module is rated at 2.25 Amps to power the HKPilot, receiver and peripherals (GPS and Telemetry radio) ONLY. To power servos use an ESC with an adequate BEC or a standalone BEC plugged into the output bus, and remove jumper 1 to isolate the two power lines.

Specifications:
Max input voltage: 18V
Max current sensing:90A
Switching regulator outputs: 5.3V at 2.25A max
6-pos Molex cable plugs directly to HKPilot
Voltage and current measurement configured for 5V ADC

Includes:
DF13 6 Position Connector 150mm long
HKPilot Power Module with XT60 Connectors

Product
Specifications

Additional Information

  • SKU:
    9387000032-0
  • Brand:
    N/A
  • Capacity (mAh)
    No
  • Shipping Weight(g)
    42.00
  • Length:
    100.00
  • Width:
    15.00
  • Height
    40.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
It worked fine for a few flights, but at some point one of the cables broke from the solder. I am not very skilled with a soldering iron or want to try to fix it, but beware that the connections may be weak and try not to bend it very much, if at all.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Must have product if using the HKPilot or any APM derivatives. Pretty much does what its supposed to. I ended up frying one by having one of my motor leads reversed but thats completely my fault. Would be nice if it had some sort of reverse polarity protection but I dont blame the design, more of a bonus feature. Overall great product and does what its supposed to!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
jabnfauibhuibdhasvgibhdfaspuivbhdfasjuibvhdubhvjuidsbhvfjuibdfsvgjuibdfasvg

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
poor soldering..........................
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
If you solder it the right way it it provides reliable information..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good stuff, works as advertised
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works well, and value
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very easy to use, ............. you need to have it, very interesting ..............., ........... very nice .. goods, works fine ......., ...........
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works perfect once calibrated. Using the 433mHz Telemetry set connected to my smartphone, the battery status per 10 percent is spoken through your phone speakers. Great!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great module for hkpilot. i dont need a separate bec anymore. they should sell it as a kit with the flight controller.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
connector download now [333kb]

Combine

essential items and
acc

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.