Constant Current: 60A
Burst Current: 80A
Battery: 2-4S / 5-12s NiXX
SBEC: 5.5v / 4A
Motor Type: Sensorless Brushless
Size: 70 x 32 x 17mm
Battery Wire: 14AWG
Motor Wire: 14AWG
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)
Note: User manual can be downloaded from the files Tab.
This is a Very Good ESC,the Programme Card that you can buy from Hobbyking is spot-on-know need to worry about throtell programing.Ive used a lot of ESCs in my time and this one works flawleslly,will be ordering another for my 870kv Seagull Raven....A no nonsense ESC !This is a Very Good ESC,the Programme Card that you can buy from Hobbyking is spot-on-know need to worry about throtell programing.Ive used a lot of ESCs in my time and this one works flawleslly,will be ordering another for my 870kv Seagull Raven....A no nonsense ESC !I have 10 of these operating in various aircraft. Some drawing high amps as well and to date have never had a failure. Cant be beaten at the price. I've had other more expensive brands fail. I guess at this price keep a couple spare like I do but as i said have not needed to use them because of a failure.Connected to motor and receiver, esc enters programming mode, (did not want to program it)
Advancing throttle stops program mode tones, but motor does not work. Why? Manual does not address how to not enter program mode, or why this acts this way.buon esc dal peso ridotto con un ottima dissipazione del calore garantisce oltre 55 ampere continui restando appena tiepido prodotto hobbyking affidabileTwo esc two crashes... keep away of this productSuper quality.
17 euros for an item that goes for 60 euros on other brands.
Does the job perfect in a 1200 mm plane.I have bought my 2. 60A ESC from Hobbyking, the first one was ok, the 2. didn't even survive the first full throttle. I have opened the RMA but the shipping costs to send it to GB are higher than the value of this esc, so I have to get a new one. Is this intended?These have worked flawlessly for me & come with a decent rated BEC at 4A. The only minor negative worth mentioning is that the heatsink doesn't have any fins on it and is a flat aluminium block.Works very good. Handle 60 Amp ok. The deafult settings is ok. Turn on the transmitter, throttle to full, plug in the Li-Po, hear the beeps, throttle to min, hear the beeps, disconnect the Li-Po, and the throttle range is set.
I have nothing bad to write about this.
A video test : https://youtu.be/1qFaWvmzUdI
Manual download now [1083kb] Manual from International listing download now [1083kb] HK60-manual download now [1083kb] HK 80A ESC manual GERMAN download now [193kb] HK ESC Manual download now [1083kb] manual download now [1083kb] Manual download now [1083kb] manual 20A/30A/60A download now [197kb] manual download now [1083kb] HK Speed Control download now [1083kb] esc manual download now [1083kb] esc manual download now [1083kb] No File Name download now [1036kb] HK ESC Manual.PDF download now [1036kb] ESC USER MANUAL download now [1.06Mb]