Its no “Mystery” where these ESCs are made, now they are available to you at HobbyKing prices.
Built with imported N-Channel mosFET's and an ultra fast Atmel MCU & heartbeat make this a high performance ESC with excellent sync capabilities.
Programmable via an R/C controller.It allows you to program all functions to fit your specific needs, which makes it efficient and user friendly.
Extremely low internal resistance
Super smooth and accurate throttle linearity
Over heat and over-load protection
Auto shut down when signal is lost or radio interference becomes severe for more than 2 seconds
Supports high RPM motors
Power arming protection (prevents the motor from accidentally running when switched ON)
New Advanced programming software
Brake setting (we recommend using brake for only folding props applications)
Battery type(LiPo or NiCd/NiMh)
Low voltage cutoff setting
Factory default setup restore
Timing settings (to enhance ESC efficiency and smoothness)
Soft acceleration start ups (for delicate gearbox and helicopter applications)
Governor mode(for helicopter applications)
Motor rotation( clockwise\counterclockwise)
Low voltage cutoff type (power reduction orirnmediate shutdown)
Factory default settings:
Battery type Detect: LiPo with Automatic Cell
Low voltage cutoff threshold: Medium (3.0V/65%)
Timing setup: Automatic
Soft Acceleration Start Up: Medium
Governor mode : OFF
Frequency : 8kHz
Low voltage cutoff type: Reduce power
Cont. Current: 12A
Burst Current: 16A/10sec
Battery: 2-3 Cell Lipo / 5-12 Cell Ni-XX
SBEC: 5V/ 1A Output
- Blade Count:
My standard 12A ESC for light planers. I programm it with the optional card.
Gewicht 9,75g inkl. Kabel
Akkukabel 20-AWG 5cm
Motorkabel 20-AWG 5cm
Empfaengerkabel 15,5cm inkl Stecker
My order was lost and Hobbyking will not help because I chose the cheap shipping method. They say they are not liable for it and they suggest spending $13.29 for shipping this item. Unbelievable.
Kaliteli ESC, iki adet ald?m, memnunum.
Used this in my Mini Skywalker with a 1806 2280Kv motor and it's fine :)
Badass little esc, I have nothing bad to say about it. I use this on a lot of foam board planes because I like to solder my motor wires direct to the esc or esc wires and the "motor rotation reverse" option makes it easy when going from tractor to pusher and back. Very easy to program!
Doesn't even break a sweat driving a Park250 on a 2S-800 pack, while swinging a 7x3.8SF trimmed to 5.75" and profiled like the stock one.
luft einwandfrei. leicht, gut und gnstig
love this little esc runs 3s awsome
These are great speed controls with excellent throttle response and a host of great features at an unbelievable price and rock solid reliability - they are my go to speed controllers as I know I can rely on them to work