New Items News Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

HobbyKing Angelbipe 3D EPP 820mm w/Motor (Kit)

HobbyKing Angelbipe 3D EPP 820mm w/Motor (Kit)

Discontinued Product

Please continue searching for a similar product.
SKU:
9095000071-0
WANT FREE SHIPPING? Click here to find out more!

The Angelbipe 3D is an all EPP 3D aerobatic plane perfect for small parkflying or the local baseball diamond. The large control surfaces can be set low for smooth docile response or turned up for maximum 3D fun!

The Angelbipe 3D can really take a beating thanks to its ultra durable carbon reinforced EPP foam construction. This is great for those unexpected "crash" landings. In most cases the Angelbipe 3D will simply bounce off the ground and be ready to fly again straight away.

The Angelbipe 3D is easy to build and includes all necessary hardware. Simply add your own brushless ESC, servos & radio system to complete the kit.

Features:
• Kit version - just install your choice of battery and electronics
• Ultra tough EPP foam construction
• Carbon fiber reinforced airframe
• Lightwieght design
• Includes brushless outrunner motor
• Easy to fly

Specs:
Wingspan: 820mm
Length: 924mm
Flying Weight:400-450g with battery
Motor: 2208 1260KV brushless outrunner
Propeller: GWS 8x4

Required:
4CH transmitter and receiver
20~30A brushless ESC
4 x 8~10g servo
3S 11.1V 800~1000mAh lipoly battery

  • SKU 9095000071-0
  • Brand HobbyKing
  • Capacity (mAh) -
  • Shipping Weight 1280.0000
  • Packaging Length 960.00
  • Packaging Width 70.00
  • Packaging Height 280.00
  • HK AngelBipe EPP Biplane
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

this was my first profile 3d plane. i ordered it with stock motor and prop and fly it with 1000mah 3s. everything went together easy and the battery fits well in the slot provided. the only problem i had was getting the upper and lower ailerons lined up correctly and locked in. if this is your first profile prepare to use both sticks a lot, there is little if any lift created by the wings so it goes where you point it. turns require rudder, elevator, aileron, and throttle. once you get the hang of it the plane can do about anything including hover with the stock motor and a good battery. this plane has also improved my helicopter flying because the inputs are similar for flight and turns. i have not crashed it but have set it down a little hard and it holds together. when the wind blows it around on the ground it doesnt break parts off like my friends profile planes. i am extremely happy with this plane and it has quickly become the first one in the air when i go flying.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this was my first profile 3d plane. i ordered it with stock motor and prop and fly it with 1000mah 3s. everything went together easy and the battery fits well in the slot provided. the only problem i had was getting the upper and lower ailerons lined up correctly and locked in. if this is your first profile prepare to use both sticks a lot, there is little if any lift created by the wings so it goes where you point it. turns require rudder, elevator, aileron, and throttle. once you get the hang of it the plane can do about anything including hover with the stock motor and a good battery. this plane has also improved my helicopter flying because the inputs are similar for flight and turns. i have not crashed it but have set it down a little hard and it holds together. when the wind blows it around on the ground it doesnt break parts off like my friends profile planes. i am extremely happy with this plane and it has quickly become the first one in the air when i go flying.

Fantastic plane. A tad tail heavy, so move tail servos up under the wing & run a carbon pushrod. Lots of fun & very easy to fly. Looks great in the air. My favorite HK plane so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic plane. A tad tail heavy, so move tail servos up under the wing & run a carbon pushrod. Lots of fun & very easy to fly. Looks great in the air. My favorite HK plane so far.

Excellent quality EPP and components, Truly.
I bought on sale hence the 5 crowns for value.
You will need servo extension cables for rudder and elevator and a Y servo cable for the ailerons. You get 1 cable tie for holding esc in place but you will also require a battery strap and CA/HOT glue for the initial build which goes together very simple. Novice Simple ;)
Thick air frame, Great for Outdoor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent quality EPP and components, Truly.
I bought on sale hence the 5 crowns for value.
You will need servo extension cables for rudder and elevator and a Y servo cable for the ailerons. You get 1 cable tie for holding esc in place but you will also require a battery strap and CA/HOT glue for the initial build which goes together very simple. Novice Simple ;)
Thick air frame, Great for Outdoor.

Builds very quickly and flies great even in wind (maiden was in 20-35kph winds) it requires a bit of side thrust so fit a few washers when fitting motor. honestly i love flying it will do just about any 3d maneuver you can imagine. Hovers rock solid and torque rolls beautifully.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Builds very quickly and flies great even in wind (maiden was in 20-35kph winds) it requires a bit of side thrust so fit a few washers when fitting motor. honestly i love flying it will do just about any 3d maneuver you can imagine. Hovers rock solid and torque rolls beautifully.

Though rather compact, this one is very stable and easy to fly. Hovering is also very easy with this. Slows down very well for landing, and when brake (flap side) mixing is used, it even slows down for narrow landing area of 5m x 5m. Excellent plane for fun.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Though rather compact, this one is very stable and easy to fly. Hovering is also very easy with this. Slows down very well for landing, and when brake (flap side) mixing is used, it even slows down for narrow landing area of 5m x 5m. Excellent plane for fun.

Very qualitative goods.
Bad-no information on motor on HK.
From network: AS 2208-15 kv 1260, weight 38, Max current: 12A.
Prop Test Data:
GWS 8x4 - 11.1V / 85W / 7.8A / 0.530kg thrust
GWS 9x3.8 - 11.1V / 145W / 13.2A / 0.720kg thrust

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very qualitative goods.
Bad-no information on motor on HK.
From network: AS 2208-15 kv 1260, weight 38, Max current: 12A.
Prop Test Data:
GWS 8x4 - 11.1V / 85W / 7.8A / 0.530kg thrust
GWS 9x3.8 - 11.1V / 145W / 13.2A / 0.720kg thrust

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking