Total Price

$0.00

Cart 0 Cart 0 Loading...

HobbyKing AP-03 7000kv Brushless Micro Motor (3.1g)

Generating Links

HobbyKing AP-03 7000kv Brushless Micro Motor (3.1g)

Price:

Now save save $0.00 $0.00

$19.55
Shipped From:
  • USA
  • Global
  • EU
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
HK-AP03-7000
want FREE shipping? Click here to find out more!
High quality micro motors. Precision wound with silver-copper wire and ultra hard-press laminations.
Extreme performance and efficiency for your micro plane.

Factory Spec.
Kv: 7000rpm/v
Lipo Range: 1S 3.7V  
Suggested prop: 3020 
Max current: 3A
Burst current (10sec): 4A  
Weight: 3.1g (including mount and wire)
Shaft: 1.5mm
Shaft length: 6mm
Dimensions : 13 x 10mm
 
Test data:
3020 prop (Recommended)
Voltage: 3.7V
Current: 2.1A
Thrust: 44g
 
For 30g 3D airplane and 60g normal flying.
  • Kv(rpm/v) 7000.00
  • Max Current (Motor) (A) 4.00
  • Resistance (mh) 0.00
  • Max Voltage (V) 4.00
  • Power (W) 16.00
  • Shaft A(mm) 2.00
  • Length B (mm) 10.00
  • Can Diameter C(mm) 13.00
  • Can Length D(mm) 4.00
  • Total Length E(mm) 16.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Dave | Verified Buyer

  • Overall
  • Value
  • Quality

Great for small aircraft brushless conversion

Jan 11, 2017

Nice appearance and good quality. Worked well in a WLToys F949 brushless conversion. Using a 3 inch prop press-fit and XP3A ESC with brake enabled so I can play "glider". Cute fun little plane and no more replacing brushed motors or the stock noodle'y prop shaft.

John | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jul 17, 2016

Very cool little motor, I it put into my HK micro J3 cub paired with the XP 3A .7g micro esc, and 3x2 GWS prop. All up weight on the cub is now 42grams and performance is fantastic.
Be prepared to do some very fine soldering, and find some very small mounting screws.
This little Gem is well worth the brushless conversion cost on a micro flyer.

TieffliegerRudi | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jul 31, 2015

fr kleine Depron Hallenflieger gut

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jun 25, 2015

Measured weight is 3.3g with bare wires. Even a lightweight connector will add an extra .1g so the practical weight would be closer to 3.4g. This motor is designed for a single LiPo cell. The advertised 44g thrust with a 3x2 GWS prop is pretty optiistic. That might be achievable with perfect soldering, thick wires and a brand new high end LiPo, but my personal experiments with Zippy 350 mAh cells and thin wires and connectors (to save weight at the cost of increased resistance) managed to spin a GWS 3x2 prop at around 20.000 RPM, pulling 2.6A for a static thrust of about 36g. Anything larger than a 3x2.5 (for instance a 3x3 or 3.5x2) will overload this motor (drawing more than 3 amps at 100pcnt thrust). A 4x2.5 would go beyond 5A, ending in a puff of blue smoke before you could even throttle back . Still a very good motor for 30-60g planes.

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Nov 19, 2014

buen motor muy pequeo y fuerte

Andrew | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Aug 29, 2013

Motor seems good quality but do not use for 1s use on any p@rkz0ne um planes. Tried to convert polecat to 1s and it was a huge waste of time for same as stock performance or worse.

TechnoFinder | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 10, 2013

this is so so soooo tiny ...very cool product.

Pawel | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jan 22, 2013

It works ok for my 42g 450mm wing-span micro trainer. I use it with AR6400 DSM2 RX, 3A 1g 1S ESC, 1S 200mah 20C Li-pol, and 4x2,5 prop.

Loopy | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Aug 14, 2012

I have done some thrust testing with various propellers on the AP03-7000kv motor.
See this video.
Youtube.com/watch?v=6WMros9ZCjA

Works good on a 1s LiPo system with certain props and batteries like GWS 5030 prop and 160mah Nanotech on a XP3A ESC.

numanair | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Feb 05, 2012

It's so tiny! It is smaller than the picture makes it look, but its still a good motor.

  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags