When pulling power matters and looks.. well.. just dont, then the HobbyKing Donkey ST2204 motor and esc combo is the work horse for you. This tough-as-rawhide motor features a heavy duty mount, a 3mm shaft and self oiling bushings that just wont give up like some of the bearings in those little "Show Pony" motors.
Dimensions: 27.5 x 16mm
Voltage: 6v~13v (2~3s lipo)
No-load current: 1.1A
Max Current: 12A
Max Watts: 100W
Mounting Holes: 35.5mm
ESC: 10A with XT60
7035 - 11.1v - 8.4A - 440g Thrust
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Este combo va genial para el miniskywalker y a muy buen precioGood low cost motor/esc, shaft easily bent.Good price, good motor...
But d`t have program card! It`s crezy work - wait 18 time for change direction!!!Die Motor halterung ist etwas anfllig gegen Ste/abstrtze bricht gerne
aber preis leistungs technich ein monster
ein gnstiger groer motorBought 2 of these for a rc superhero type thing as counter rotating required l changed wiring to reverse one motor and that esc gets quite hot while other remains cool
obviously doesn't like running in reverseGood deal for the price.
Running it at slightly less power it should, or may last longer.
My observations with GWS props are the following for the
HK Donkey BL motor, 1700 kv
GWS prop 7035 6030 5043
LiPo volts 11.30 11.36 11.30
Amps 7.89 7.62 6.45
watts 90.2 82.5 74
i have had this fitted to a ft flyer and delta wing. no problems surprised me how much power this has could even be good for mini quad, tips, balance, keep it cooled, and thrash the snott out of it.I use this on a small KFM-4 Wing, very satisfied. Chep, light plenty powerful, never runs very hot (so far). I am not sure about the motor mount strength as others have posted but for a pusher, it's fantastic. Excellant value for the moneycan anyone try ths motor for powertest
i bought 4x but i use only with7x3.5 i want to learn other posibilities cuz i dont like 7x3.5 props from gws its just WEAK
i like ths motor not well balanced but you can balance it easly i use 6 or 5 nch prop with it
ill use it for mn quad my quad is now 10'' i want smaller props performande please try it
its over povered for price/performanceRan this motor on a scratch built FT Delta with a 3s 1000mah and a 8045 prop. Very smooth motor and the ESC doesn't get to warm. This combo provided more power than what i was expecting. However the one downside too this combo is the motor's mount, after a medium intensity crash 2 of the arms broke off. It seems to me that the the mount's metal is rather brittle, however the motor ran well afterwards and nothing was bent thanks too the short shaft. I would buy again.