Hobbyking Fiberglass Micro Quadcopter Frame 245mm
Hobbyking Fiberglass Micro Quadcopter Frame 245mm
Awesome!
Copy and Share the Below URL
The HobbyKing Fiberglass Micro Quadcopter frame is an inexpensive yet stylish platform for your micro quadcopter projects.
Built from light weight yet rigid fiberglass which offers a great combination of weight savings and strength. It includes a complete set of nylon hardware which makes assembly a breeze and keeps the overall weight down.
We offer a full line of available quad electronics such as quadcopter control board, ESC & motors. It has never been easier or more affordable to get a quad in the air!
Specs:
Height: 75mm
Width: 245mm
Motor Mount Bolt Holes: 26mm
Required:
4 x Turnigy 1612-3200kv (or similar size/kv)
4 x 6~10 Amp ESC
4 x 5x3 Prop (2CW & 2CCW)
1 x HobbyKing Multi-Rotor Control Board
1 x 800~1000Mah 2s 7.4v Lipoly battery
16 x M2x8 Bolts (for motor)
16 x M2 lock nuts (for motor)
Your own radio and 4 channel receiver
-
SKU 319000001
-
Brand -
-
Capacity (mAh) -
-
Shipping Weight 347.0000
-
Length 280.00
-
Width 55.00
-
Height 200.00
Very good quality construction. All pieces cut and drilled accurately. Small and light for micro quad setup. Hardware is also quality and they even provide extra. Fiberglass panels are thin and flexible, yet the structure becomes rigid once assembled. I would buy again.
Very good quality construction. All pieces cut and drilled accurately. Small and light for micro quad setup. Hardware is also quality and they even provide extra. Fiberglass panels are thin and flexible, yet the structure becomes rigid once assembled. I would buy again.
Frame itself is nice, unhappy with the fact that the "Required" motors don't mount on the frame, which requires either drilling a new set of holes or some other way to adapt it.
Frame itself is nice, unhappy with the fact that the "Required" motors don't mount on the frame, which requires either drilling a new set of holes or some other way to adapt it.
Das Frame ist leider nicht zu gebrauchen.
Es ist viel zu weich und verdreht, bzw. verbiegt sich schon beim hinschauen.
An einen Flug ist nicht zu denken!
Ich werde wieder mein Holzframe nehmen und nur einige Teile des Kid verwenden.
Gru, Andi
Das Frame ist leider nicht zu gebrauchen.
Es ist viel zu weich und verdreht, bzw. verbiegt sich schon beim hinschauen.
An einen Flug ist nicht zu denken!
Ich werde wieder mein Holzframe nehmen und nur einige Teile des Kid verwenden.
Gru, Andi
Boa resistncia e estabilidade.
Boa resistncia e estabilidade.
I bought this to replace my borken Turnigy Micro Quad frame. I am disappointed to find that they don't use same motor mount. It has 3 holes instead of 4. I will have to drill new holes. Other than that, it seems much stronger than Turnigy Micro Quad which I broke 2 of them in medium crashes.
I bought this to replace my borken Turnigy Micro Quad frame. I am disappointed to find that they don't use same motor mount. It has 3 holes instead of 4. I will have to drill new holes. Other than that, it seems much stronger than Turnigy Micro Quad which I broke 2 of them in medium crashes.
The motor type proposed in the description does not fit properly on the shape: there are too small and no holes have been designed in order to fix the motors.
I think i will use loctite to fix them.
Don't buy it, prefer to create your own shape.
The motor type proposed in the description does not fit properly on the shape: there are too small and no holes have been designed in order to fix the motors.
I think i will use loctite to fix them.
Don't buy it, prefer to create your own shape.
First, this is a mini quad, not micro. The suggested micro sized motors and esc's (same included with the HK micro quad RTF) shown on the product page will not fit, the kit actually calls for 1504 motors right on the box as well as 10A esc's, hobbyking should not be advertising this as a micro, it's a mini. Here are the actual recommended specs right off the box:
length: 210mm, Width: 210mm,Flying Weight:270g, Motor: 2700KV 1504,BEC:10A,Prop 5030*3, Battery: 7.4 2200Mah
First, this is a mini quad, not micro. The suggested micro sized motors and esc's (same included with the HK micro quad RTF) shown on the product page will not fit, the kit actually calls for 1504 motors right on the box as well as 10A esc's, hobbyking should not be advertising this as a micro, it's a mini. Here are the actual recommended specs right off the box:
length: 210mm, Width: 210mm,Flying Weight:270g, Motor: 2700KV 1504,BEC:10A,Prop 5030*3, Battery: 7.4 2200Mah
Excellent frame, light and strong. With 2900 kV Motor and 7,4 V Lipo very good flight properties. I have a lot of fun !
Excellent frame, light and strong. With 2900 kV Motor and 7,4 V Lipo very good flight properties. I have a lot of fun !
awesome, just got it today. feels high quality
awesome, just got it today. feels high quality
nice for indoor use , and very sturdy and crash proof
nice for indoor use , and very sturdy and crash proof
Combine Essential Items and Save
Special Price $2.78
You save $0.92
Was $3.70
Special Price $3.15
You save $0.55
Was $3.70
Related Products
-
Turnigy 1811 brushless Outrunner 2900kvSKU: T1811-2900
$12.20 -
TURNIGY Plush 6A /.8bec/6g Speed ControllerSKU: TR-6A
$10.34 -
Turnigy nano-tech 850mah 2S 25~40C Lipo Pa...SKU: N850.2S.25
$6.35 -
Hobbyking™ Propeller 5x3 Black (C...SKU: 9332000002
Starting from: $2.92
Special Price $3.15
You save $0.55
Was $3.70
-
HobbyKing Multi-Rotor Control Board V3.0 (...SKU: 9171000011
$13.78 -
Turnigy 1000mAh 2S 20C LiPoly PackSKU: T1000.2S.20
Starting from: $4.62 $5.02 -
Turnigy 800mAh 2S 30C Lipo PackSKU: T800.2S.30
$7.08 -
TURNIGY Plush 10amp Speed Controller w/BECSKU: TR_P10A
$11.94 -
HobbyKing 1612 Brushless Outrunner 3200KVSKU: HK1612-3200
$14.94 -
Hobbyking Propeller 5x3 Red (CW/CCW) (6pcs)SKU: 9332000003
Special Price $2.78
You save $0.92
Was $3.70
-
Turnigy nano-tech 950mah 2S 25~50C Lipo PackSKU: 9210000005
$6.79