Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

HobbyKing Kinetic Replacement Motor 2226-1250KV

HobbyKing Kinetic Replacement Motor 2226-1250KV

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
65 g
SKU:
HK-KIN-MOTOR
Product
Description

HobbyKing Kenetic Replacement Motor 2226-1250KV

Specs:
Size: 2226
RPM: 1250kv
Max Volts: 11.1v (3S)
Max Amps: 8Amp
Thrust: 440g
Weight: 35g
Shaft: 3mm
Bolt Hole: 16mm
ESC: 10~15Amp
Suggested Prop: 8x5

Product
Specifications

Additional Information

  • SKU:
    HK-KIN-MOTOR
  • Brand:
    N/A
  • Shipping Weight(g)
    65.00
  • Length
    0.00
  • Width:
    0.00
  • Height:
    0.00
  • Kv(rpm/v)
    1250.00
  • Unit Weight (g)
    35
  • Max Currents (A):
    8.00
  • Resistance (mh):
    0.00
  • Max Voltage(V)
    7.00
  • Power (W)
    No
  • Shaft A(mm):
    3.00
  • Length B (mm):
    26.00
  • Diameter C(mm)
    22.00
  • Can Length D(mm)
    16.00
  • Total Length E(mm):
    41.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
semble moins puissant que le moteur d origine avec 9*6 cam aeraunote
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Gets VERY hot on 3s Only use on 2S
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just works, no problems found so far.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Put one in my Merlin and it works well but Id wished for some higher kV like 1400 or so on 3S for higher speed (not sure I had the original blades, had 8x5, 7x4 and 6.5x4)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I had to replace the original motor in the 800 glider with this replacement motor. The motor 4 mounting screws that came with the new motor are too small for the new motor screw holes. The old screws are of no use in the new motor because the new motor has bigger screw holes. Will I get the correct size screws for HobbyKing?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I had to replace the original motor in the 800 glider with this replacement motor. The motor 4 mounting screws that came with the new motor are too small for the new motor screw holes. The old screws are of no use in the new motor because the new motor has bigger screw holes. Will I get the correct size screws for HobbyKing?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have replace this motor ADH300L Brushless Outrunner 1100kv on Kinetic 800. The axis has been turned concerning regular position. It is necessary to pierce deepening in an axis under the screw a fixing rotor.

Holes have approached ideally. Flies Kinetic with this motor very well, draft suffices for launch vertically upwards.

The controler 18A is heated with the given motor, I have put turnigy 30, it isn't heated

ADH300L Brushless Outrunner Kinetic 800. . .

&#1
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.