Total Price

$0.00

Cart 0 Cart 0 Loading...

Hobbyking KK2.0 Multi-rotor LCD Flight Control Board

Generating Links

Hobbyking KK2.0 Multi-rotor LCD Flight Control Board

Price:

Now save save $0.00 $0.00

$30.68
Shipped From:
  • USA
  • Global
  • EU
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
9171000073
want FREE shipping? Click here to find out more!

Designed by the Grand father of the KK revolution, Rolf R Bakke, exclusively for HobbyKing, the KK2.0 is the evolution of the first generation KK flight control boards. The KK2.0 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed. simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and your ready to go! all of which is done with easy to follow on screen prompts!

The original KK gyro system has been updated to an incredibly sensitive dual chip 3 Axis gyro and single chip 3 axis accelerometer system making this the most stable KK board ever and allowing for the addition of an Auto-level function. At the heart of the KK2.0 is an Atmel Mega324PA 8-bit AVR RISC-based microcontroller with 32k of memory. An additional 2 motor output channels have been added to the KK2.0 allowing for a total of 8 motors to be controlled (Octocopter). A handy Piezo buzzer is also included with the board for audio warning when activating and deactivating the board.

If your new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2.0 was built for you. The 6 Pin USBasp AVR Programming interface ensures future software updates will be quick and easy.

Specs.
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega324 PA
Gyro: InvenSense Inc.
Accelerometer: Anologue Devices Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
Firmware Version: 1.2

Here are some How-to Vids:

Part 1

Part 2

Part 3

Part 4

Part 5

Pre-installed firmware.
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Singlecopter 2M 2S
Singlecopter 1M 4S
(Custom Mix via the "Mixer Editor" option)

The Mixer Editor allows you to adjust where and how much signal the motors receive from stick input and sensors. This allows you to create any configuration possible with up to 8 motors or servos.


Whats is a Multi-Rotor Control board you ask?


The HobbyKing KK2.0 Multi-Rotor controller is a flight control board for multi-rotor Aircraft (Tricopters, Quadcopters, Hexcopters etc). Its purpose is to stabilize the aircraft during flight. To do this it takes the signal from the three on board gyros (roll, pitch and yaw) then passes the signal to the Atmega324PA IC. The Atmega324PA IC unit then processes these signals according the users selected firmware and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabilizes your multi-rotor craft.

The HobbyKing KK2.0 Multi-Rotor control board also uses signals from your radio systems receiver (Rx) and passes these signals to the Atmega324PA IC via the ail, ele, thr and rud inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight (up, down, backwards, forwards, left, right, yaw).

Note: A user manual is available under the files tab.
*Royalties paid on each unit sold to Rolf R Bakke, the original KK Designer.

  • Hobbyking KK2.0 Multi-rotor LCD Flight Control Board
Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

TonyGlez | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 14, 2014

Thanks GOD and knock on wood for this board did NOT came defective, everything is working fine (I guess), I mounted on a Quad then move it to my Trycopter, I have NOT flashed it YET, so far so good. HW ver 2.15 FW ver 1.6 hex Tron ik

Geoffro | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Mar 19, 2014

An excellent flight controller and probably the best bang for your buck you are going to get. Advantages of this over say the Naza, is the OSD so you can tweak out in the field, where as the naza requires a laptop/usb to configure. For $30 odd dollars, you can afford to put it in your hobby projects - and when I say it will make anything fly, it will make anything fly. Be aware Naza dont do stock tricopters, so if you are doing a tricopter then this is the board for you. I have bought several of these, and never ever had one fail on me, production could be a tad better but it is a budget item.

Simon | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jan 08, 2014

H550 Hexacopter with Plush 40A ESC and 1400kv Turnigy outrunners and KK2. Flys like a dream.

Great controller for your first multirotor machine. East to learn about PI settings at the touch of a button
www.youtube.com/watch?v=VwtWNcHNRpA

MrMarek | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Dec 07, 2013

Perfect product!
I used them for Tricopters, Quadcopters and Hexacopter.
Just briliant!
See my YT chaneel: MrMarek166

F100CUFFLINK | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Nov 22, 2013

this has to be the best thing ever for RC ,this was so simple to set up ,I also went on YOU-TUBE for other info on this product,there is a hole bunch of vidio's also,
.
This is very easy to set-up,,took me a few vidio's to do it from on line.me tri-copter works very well and flies great, just needs to be tweeked out just a bit GREAT PRODUCT I GIVE IT 5 Crowns,i need 2 more as soon as there in I will buy them.

Flugmodell | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Nov 22, 2013

no es que no funcione bien, pero lleva la version 1.2 y en AUTO LEVEL NO FUNCIONA BIEN. A si que te toca comprar lo de mas para poder actualizar lo. Y lo encontre en Ebay porque aqui no lo tienen.





F100CUFFLINK | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Nov 22, 2013

all I have to say is THIS IS DAMN GREAT thank GOD we have this I don't think I would have tried quad-copters, this is to easy ,all I did was follow the guys on you-tube to set it up and I little out side help from a friend 200 miles away. This is FANTASTIC!!!!! I need a couple more ,come on HK when will they be in stock again ?

Prothias | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Nov 14, 2013

Best flight board ever

It's so easy to use and setup

F100CUFFLINK | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Nov 13, 2013

WOW FANTASTIC NO MORE TO SAY, this is the first time for me with quads in my case I did a tri-copter ,all I had to do was set it to tri-copter for the motors and with a little help from a friend I managed to set the rest ,also from you-tub vidio's it was very easy to do ,now im doing a quad but I need A FEW more CONTROLLERS .

F100CUFFLINK | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Nov 13, 2013

this is great this is the first time for me with a quadcopter in my case I did a tri-copter ,1 ward fastastic,i cant say a bad word about it ,all I had to do was set it for tri-copter and make a few adjustments ,and a little help from a friend that knew how to set them up. Just great cant beat it for the money ,I need a couple more HK when will they be back in stock?????????

Customer files
M1 and M2 soldert Download [2273]
kk20 the back side Download [2273]
HK User Manual KK2.0 Download [108]
X-copter with KK2 Download [2949]
KK2-ISP-Pinout (AVR USB Programmer) Download [177]
PVC Quad frame with GoPro Download [568]
HK KK2.0 card in the PVC frame Download [526]
FPV quad made with HK450 frame and KK2 Download [512]
No File Name Download [138]
No File Name Download [171]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories