This lightweight on-board glow driver unit is ideal for model aircraft, helicopters and cars and features an LED on/off switch, a voltage regulator and all leads. Simple to install, a push of the button will ignite your glow plug and keep it on for 15secs. The unit will automatically adjust the output current to ensure the best working temperature for the glow plug.
Although it featues an input voltage range from 6v-12v, and power can be taken from the RX power supply, a 2s Lipoly power supply is advised.
6v~12v Auto Sensed input voltage
Constant output voltage 1.4v, 6A max output.
On/off switch, also auto shutdown after 15s.
Short Circuit and over-heat protection.
High efficiency switch mode BEC
LED on/off display.
Weight: 22g (inc all leads & switch)
Dimensions (BEC): 32mm x 23mm x 7mm
like this...saves me a lot of trouble when starting the engineworks just as it shoulddoes just as it shouldAs clever as sliced bread! Brilliant easy, safer, starting. I have bought one for each of my planes, and my friend is using three on his Saito three cylinder four stroke.
Сгорел при первом включении!!!!!!!!!!!!!!!!!!!Excellent unit. I wanted to be able to use it anytime not just for starting so set up a tiny servo to press the switch button using the Tx gear switch. A 1300 2S lipo does a days flying and is small enough not to cause a problem.buon sistema di accensione, molto utile al posto del classico accendicandela visto che alimentabile con lipo, l'unica pecca il tempo di accensione visto che garantische corrente per circa 20 sec, il bec molto efficace e funziona bene il cicrcuito molto meglio dei classici accendicandelaInstalled on a Hanger 9 Tango with OS SF 46.
This was definitely worth the money. You can run it from your RX battery pack. Just push the button and wait for the light to go solid, then start the engine. Works really well and its very light weight. I have 2 complaints though, the leads to the ground spade and the plug clip are very short (approx 4 inches) I had to extend them to mount the unit in my plane. Also the board with the button should include a set of standoffs to mount to the fuselage. You will need standoffs to do a clean install.If like me you get tired of those pesky glow ignighters,wondering if they're working,then for the price this is what you want,and can plug right into your received..5 starsGreat bit of gear to have for any nitro user. I mounted mine on a Turnigy Trooper Nitro SCT and after a slight modification and working out where to best place this, it worked perfectly. Highly recommended.