The Hobbyking super simple boat series comes with a limited range of programming functions and are designed to be plug & play.
A perfect ESC for those looking for something simple to use and economic.
Cells: 2-4S Li Po
Continuous Current: 200A
Burst : 220A
Bec: No BEC (Opto)
User Programming options.
Cell type / Voltage cutoff
Throttle (Auto / 1.1ms to 1.8ms / Hard / Soft )
Brake (No Brake / Soft / Medium / Hard)
Motor Direction (Clockwise / Counter-clockwise)
Timing Mode Setting (1 / 7 / 15 / 30)
PWM setting: 8K/16K
This ESC is OPTO, with no BEC supplying power to your receiver. You will need an extra power source for your receiver. (such as UBEC or Rx battery pack)
I would not recommend this esc because there is NO low voltage cut-off. I found out the hard way, batteries came back with 1pcnt left in them. Stick with a Turnigy which are better quality.Run approx 25 batteries (4ooo mah 3s 50 to 90c) through this ESC with 3665 2500KV inrunner pushing a 800mm cat. first 20 batteries all good last 5 ESC runs for about 2 minutes then shuts down (overheat cut off) then restarts but only for a second or two.
Like the saying goes YOU ONLY GET WHAT YOU PAY FORhttp://www.youtube.com/watch?feature=player_embedded&v=U8DYs5xP7go
with 36-74 2650 kv and 5s nanoI was running this esc in one of my custom rc surfers. Mid way threw programming the esc it went up in smoke. disappointing.Hi all, received my esc last week. That's about the best thing about it. Put it into my boat and all seemed well, took it to the lake and checked the cooling lines, taped up the hatch and got all of about 10 meters before the boat stopped dead. Smoke started pouring out of the hatch, which turned into flames when I finally got the hatch open! Lucky I was able to dunk the whole boat under to get rid of the flames one I got the battery out. I was running 4s on the seafire standard motor, should've been well within its limits. Not happy.IS a nice ESC, But Hobbyking should make the program card. so that is easy to programming..
I have bought 3 unit.I bought this to run in my Osprey. I have had a about 4 runs with it only on 4s but it has been faultless.
Temps on 4s with the 2200kv motor are cold.
I would buy another one. Great value for money.j'ai achet deux de ces controleurs , ne fonctionnent qu'avec trois cellules , au-del ne fonctionnent pas du tout.A dconseiller fortementA fantastic esc easy to use I fill ends with silicon neutral cure to make them water tight .grosse bestiole.
a voir si il crame pas celui la...
No File Name download now [188kb] working programming instruction download now [121kb] this is the right esc programming and ma download now [105kb] right esc program max 4s(no 7s)David download now [105kb]