Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

Hobbyking SS Series 60-70A ESC

Hobbyking SS Series 60-70A ESC

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
90 g
SKU:
HK-SS70A
Product
Description

The Hobbyking SS series comes with a limited range of programming functions and are designed to be plug & play.
A perfect ESC for those looking for something simple to use and economic.


Spec.
Weight: 63g
Size: 55x35x8mm
Cells: 12-24Ni MH ~ 4-8S Li Po
Max Current: 60A
Burst : 70A
No BEC 
Timing: 1/7/15/30 programmable
PWM: 8/16K
 
Features.
Constant current 60A Max 70A
Li-Poly 4-8 cells
Low Resistant 0.0017 Ohms;
Dynamic Braking
BEC: opto
Auto shut down when lose signal
Slow down at 3.0V per cell Lipo, Cut-off at 2.9V per cell Lipo 0.8V NiMh
 
User Programming options.
Battery setting
Throttle Range
Brake setting 4 options: Direction and Cutoff Type
Timing Mode Setting: 1 / 7 / 15 / 30
PWM setting: 8K/16K

Note:
This ESC is OPTO, with no BEC supplying power to your receiver. You will need an extra power source for your receiver. (such as UBEC or Rx battery pack)
If you hear the music tone repeat for more than 3 times, you may need to check your power source to the receiver.
 
Product
Specifications

Additional Information

  • SKU:
    HK-SS70A
  • Brand:
    N/A
  • Capacity (mAh)
    No
  • Shipping Weight(g)
    90.00
  • Length:
    140.00
  • Width:
    10.00
  • Height
    75.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
variateur pas cher mais au combien serviable, mont avec un ubec. cest un vario correct, faut pas se tromper de puissance, cest tout
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super ..................
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Worked perfectly with a ZIPPY Flightmax 5000mAh 4S1P 30C and a 900 watt edf without programming. Good quality but it does not come with any of the connectors attached except the one to the receiver.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
funktioniert auch mit 3S sofern man keine berwachung haben will. dann rechnet er vermutlich mit den 12 x 0,8V NiMh/NiCd.

also aufpassen bei 3S.

(Ich hatte falsch bestellt)

Ansonsten weicher Lauf Programmierung auch einfach sofern man die SHORT anleitung nimmt.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nice esc and good quality and low price :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great ESC. Easy to program (see instructions under file tab). Using on Durafly Vampire with CS70 10 blade fan, L2855 2300kv motor and ZIPPY Flightmax 3000mAh 5S1P 20C Battery. 1070gms thrust @ 58A. Great product Hobbyking...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Utilis comme variateur de remplacement dans un Zro FMS de 1.4m : il faut ajouter un bec de 3A en parallle sur l'alimentation du variateur pour produire du 5V et alimenter la radio. Variateur progressif et qui fonctionne bien. Ra
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got one from the USA warehouse. It was dead on arrival. Doesn't work at all. ?? What the heck?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The description says, "A perfect ESC for those looking for something simple to use and economic." I would agree with this. I have it in my EPP-FPV and it works well, especially for the price. Don't forget a 3A Turnigy UBEC. I just soldered a JST connector onto the UBEC and run that off a separate battery. For the EPP-FPV you need to add wight to the nose anyway.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
lo probamos y quedamos conformes con el rendimiento.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.