Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

HobbyKing Super-H 600 QuadCopter (KIT)

Generating Links

HobbyKing Super-H 600 QuadCopter (KIT)

Price:

Now save save $0.00 $0.00

$40.27
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
366000012-0
want FREE shipping? Click here to find out more!

Are you sick of aerial photography camera ships looking like a UFO’s and flying slow and smooth like you’re taking grandma for a walk around the block? HobbyKing comes to the rescue with the new Super-H 600. 

The new Super-H 600 is a 600mm class sport flying H configuration quadcopter. The optimal layout allows for all your gear to be safely mounted between the frame plates and on the centerline for maximum maneuverability. The upper frame has provisions for 12 vibration isolation balls allowing for jello free FPV and HD video recording. The isolation benefit of a clean and dirty plate also lets you have tighter flight controller PID values for a nice tight wobble free multirotor. The proven and readily available arms make replacement in the event of a “daredevil move gone wrong” easy and cheap. The frame layout can handle a huge range of batteries and equipment and has provisions for camera and forward mounting gimbals.

If you’re ready for a fun and yet utilitarian quadcopter the Super-H 600 exceeds all expectations.

Features:
• Prop free view with H layout
• Built from quality glass fiber and polyamide nylon. 
• Pre-threaded brass sleeves for all of the frame bolts.
• Colored arms for orientation to keep you flying in the right direction.
• Anodized aluminum hardware
• Hook and rod Mounting options
• Large mounting tabs on the main frame bottom plate for easy camera mounting.
• Easy assembly
• Provisions for a clean and dirty vibration isolation frame

Specs:
Motor to motor diagonal: 600mm
Weight: 599g
Motor mounting: 16~19mm
Frame plate length: 500mm 

*Note: This frame has provisions for up to 12 vibration dampening ball for a clean and dirty system, the frame comes with aluminum standoffs standard. The vibration balls are sold separately and should be chosen depending on the given weight of the upper frame loaded.

  • HobbyKing Super-H Quadcopter Frame
Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Fran vamo | Verified Buyer

  • Overall
  • Quality
  • Value

Calidad

May 25, 2020

very good value for money, value for money very good, support sheets somewhat thin but give good consistency, made lack of central support to house the controller and a power distribution tray, that would be very good, they would only have to redesign the center sheet of the frame.

Andreas | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 11, 2016

I used this frame for a short time, because the holes are done badly. With well balanced 15" props there are too much vibrations even for a gimbal!!! It's not stable at all. When you will use it, use it with small motors and 12" props max. The max flight time I got with it was 30min, but it wasn't a nice flying via fav, because of the vibrations I hardly could see anything!!!

Janaka | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 16, 2015

What a waste. You get what you pay for. I ended up with genuine CW props and knock-off CCW props, and the slight difference in thrust at the same motor RPM caused the frame and super flexible arms to twist and yaw the quad in circles. Though correctly matching props are clearly called for, the HUGE amount offlex in the arms and lower / dirty frame of this quad made it a complete waste of my time to build. My AUW was around 2.5kg - I tried to build this around a 6s 4000mah system and a mid-size gimbal and camera. I suspect this would only work with a GoPro and a lightweight setup.

jamie | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 13, 2015

Awful kit. Don't buy it. Very flimsy, not well machined. The frame is not symmetrical when assembled.

pat12 | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 08, 2015

simple fantastic. i have not used this for long but it is my first Quad copter frame and i think that it has been a good one to chose. I have been using it on grass and it has suffered lots of accidents but all in all it was great and there is NO damage to the board. i would recomend you use the NTM Prop Drive 28-30S 800KV / 300W Brushless Motor (short shaft version) motors and the Afro ESC 30Amp Multi-rotor Motor Speed Controller (SimonK Firmware) ESC's with Slow Fly Electric Prop 12x4.5R SF (4 pc - Green Right Hand Rotation) propellers as well as left hand turning ones and a 4 cell battery for me this set up has worked great. thanks for reading this, cya

Tarek | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 04, 2015

You pretty much get what you pay for. I've ordered this frame before and it was beside one drill hole fine. The second was missing all the drill holes for the rubber balls. Not a big deal for me. And the rest of the frame is descent and if you crash it (like I did), the replacement is not that big of a deal. I recommend this frame.

Zebolc | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Feb 19, 2015

This is nice big frame with a lot of space on it and it is cheap.
However it has few drawbacks:
- it is heavy, 500g
- arms could be longer, they can fit maximum 13" props
- little too elastic for my taste
- plates are made of tick plexiglass (12.5mm) instead of carbon fiber
- there are no hols for rubber dumpers, and once you drill it your self those holes violate structural integrity of plates
- holes made for gears on plates are made in a way that makes you difficult to attach some of your gears so you have to improvise

All 4 arms are black but I like it that way, it looks cool, and if you want better orientation you can put some colorized LEDs.
I have put some pictures in file section of my build. I'm using Multistar Elite 4007.740 motors, 12" 5.5peach propellers, 4.5Ah 3s battery, Crius v2 FCB and 20A Afro Slim ESC. total weight is 1750g, but I plan to add one more 4500mAh battery and d13" 5.5peach props. That should give me 15 minutes of flight time with good maneuverability.

| Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 14, 2015

This is a great frame. I have 14 inch blades on this build. If you do Use 14 inch props you will be cutting in close but still it makes for a nice long flight time! I suggest the use of m3x11MM vibration isolation grommits! They fit well! Enjoy!

Maksim | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Feb 13, 2015

2210 turnigy

DodgeHobby | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Feb 11, 2015

A lot of gear for little money!

Nice easy build, some spares in mine (I hope they're spares!) And plenty of room. SJ400, APM GPS, 4x ESCS, FrSky Rx, FPV cam, Vtx and batt. And enough room to fit it all on again.

  1. 1
  2. 2
  3. 3
Customer files
No File Name Download [3519]
folding version Download [476]
folding version Download [476]
folding version Download [476]
perfectly tuned and tested build i have Download [391]
front view of gimbal mount with out cont Download [3130]
top view of just mounted gimbal Download [2969]
side view of my gimbal mounting system Download [3438]
Quad Just built and flown Download [558]
No File Name Download [3035]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Accessories