Country
United States
 
Shipped From:
  • US (West)
  • US (East)
  • AU

HobbyKing X550 Glass Fiber Quadcopter Frame 550mm

HobbyKing X550 Glass Fiber Quadc...

The HobbyKing X550 is a high quality folding-arm quadcopter frame that offers great looks and performance at a price that can't be beat! Built from light weight yet rigid glass fiber and aluminum, the X550 offers a great combination of weight savi...
9323000036

Now save save $0.00 $0

$23.60
447g
9323000036


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Overview

The HobbyKing X550 is a high quality folding-arm quadcopter frame that offers great looks and performance at a price that can't be beat! Built from light weight yet rigid glass fiber and aluminum, the X550 offers a great combination of weight savings and strength.

This quad features folding arms which make it easy to transport and store. The arms are also two different colors for orientation, silver and red, so it's easy to keep your quad flying in the right direction.

This quad frame also supports an optional tilt camera mount which allows for carrying a wide variety of cameras. (Please see related items below for optional camera mount)

We offer a full line of multi-rotor electronics such as multi-rotor control board, ESC, motors and more, so it has never been easier or more affordable to get a quad in the air!

All necessary hardware is included, just add your own electronics.

Specs:
Weight: 312g(Frame only)
Width: 550mm
Motor Bolt Holes: 19mm width

Required:
Multi-Rotor control board
15~25A brushless ESC x 4
3S 1800~2200mAh lipoly battery
28-XX 1100~1300KV brushless motor x 4
8x4 propeller - 2 standard/2 reverse rotation

Note: All HobbyKing X series frames are purchased factory direct. We have worked closely with the factory engineers to ensure quality. All X series frames are CNC cut and accurately milled unlike many of the cheap frames available from Ebay or Chinese vendors that are drilled by hand in low tech factories. The Hobbyking X series also feature thicker GF main plates for added stength.

Specs

Additional Information

  • Blade Count:
    N/A
  • Diameter X(Inch):
    No
  • SKU
    9323000036
  • Weight(g)
    447.00
  • Length:
    280.00
  • Width:
    60.00
  • Height
    160.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Excellent job. My order from the East warehouse arrived super quick. All parts were in the box and the frame was as advertised. Easy assembly. Being in the U.S., the postage was very reasonable. Thanks, HK !
Great frame for the money. Fits a KK2 & PDB quite happily. Quality of the plates surprised me, nice clean milling & edges. The aluminium used on the arms is strong yet light, it does deform when you tighten stuff down but I had to seriously torque stuff before they bent. Only disappointments were the arms came scratched quite a bit, the anodizing is very light and doesn't take much to scratch through it. It was missing the 3x25mm bolts, you get what you pay for though.
Really good frame. Had no issues with it. Motors will mount with only 2 bolts. not a lot of room for FPV or camera stuff. Very stable and stiff. Extra width goes along way for stability in a quad, i would say that counts for a lot more than any carbon props will.

Lachko zlozitelny. snad vydrzi
Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good coveringg
The Red/Black does help with orientation but only up to about 100 yards; after that there isn't enough contrast to really tell the orientation. There weren't any instructions or assembly diagrams so it took a while to figure out what screws went where. They need to put an assembly diagram under the files tab. I assembled with a Q-Brain 25Ax4 ESC, unfortunately the area between the legs was just a few mm too small to fit the ESC so there wasnt really a good place to put it. Sturdy and handles some pretty hefty crashes well.
I got this frame recently and it is awsome!
It's strong and very light and the folding feature is awsome, just make sure you tighten the legs a bit and do about half a turn back so you can slide it but it wont be wiggly and loose.

Do note the guide doesn't tell you to use the washers a hole lot of times despite there being enough for any screw you'd be using so do add them each time!

The manual also overlooked the fact that the metal spacers should be placed on each leg bit so keep that in mind as well!

The KK board can fit exactly on top instead of the glass fiber piece you get so that is nice as well!

I would like to see the camera attachement to be stocked in europe as well though.
nice build quality

-good cutting

-precision

-extra plastic spacer

-easy to assemble
This frame is quite good value and I am pleased I chose it for my first quad. Like some others, it is a good idea to insert wood blocks in the ends of the arms to prevent them from being crushed by the mounting and motor bolts. The hardware supplied is good and adequate and includes a battery strap. It needs legs mounted on the main frame for landing as after a while or after a heavy landing the arms tend to bend up and have to be straightened periodically.
In this one I use a KK2.1 FC board and SK3 2830 Turnigy Aerodrive motors with 9x4.7 Turnigy props and 30 Amp Turnigy Plush ESCs. I use 2450 and 2650 35C batteries. It also goes OK with 1800 35C batteries.
I cut some rings off a broom handle to insert on the legs as ' landing wheels' just to give it a little more ground clearance.
It is a steady frame and can go like a rocket if you want it to, but is also very docile when required.
To sum up, I am quite happy with this frame.
primer intento de quadcopter
View all reviews
Video
  • HobbyKing X550 Glass Fiber Quadcopter Frame

Upload video
File

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.