HobbyKing® ™ 100A Sensored/Sensorless Car ESC (1:10) with built in cooling fan.
Enhanced throttle response, excellent acceleration, enhanced braking and throttle linearity
Programmable with a HKSS programming card.
Automatically detects the number of cells within the battery pack.
Multiple protection features, Low voltage cut-off protection, over-heat protection, throttle signal loss protection and motor jammed protection
Compatible with HobbyKing® ™, NOVAK, LRP and ORION Sensored brushless motor
Cont./Burst Current: 100A/760A
Resistance: 0.0003 ohm
Suitable Car: 1/10 on-road and off-road cars / trucks
Suitable Brushless Motor: 3.5T On road / 5.5T Off road
Battery: 5-9 cells Ni-xx (NiMH / NiCd) 2-3 cells Li-Po
BEC Output: 6V/2A of switch mode built-in BEC
Motor Type: Sensorless and Sensored brushless motor
Runs very well with a Turnigy TrackStar 3.5T 9410KV Motor! Ive added some thermal paste under the cooling fan and mounted a smaller fan after the first one gave up (Wasnt the fault of the ESC)Hola me gustaria saber si el esc tiene sensor y donde esta
Graciasit works fine also which 3sEin toller Regler ! Arbeitet einwandfrei und ist sehr belastbar . Wichtig ist die Procard ,
mit der kann der Regler optimal eingestellt werden !
Regler wird dank des Lfters auch unter belastung nicht hei .
Klarer TIP !The Fan blew itself after.. (I am not joking) 25 seconds of use. I didn't even get it in my car. I connected a 2s lipo to it, it ran and then boom, no more fan. The ESC runs OK!! I mean nothing else wrong with it, just pissed off the fan died literally in the first minute of use.Great esc, easy to solder,easy to use. It has extra soldering holes for capacitor. I use it with a turnigy 7.5t sensored motor on my associated rc44 4wd buggy and it runs awesome. Program box is very small if you compare it with other brands. The only bad thing about this esc is its not very smooth on sensorless mode but its perfect on sensored. Im running it on sensored mode so its not a problem for me :)bought ths ESC YEAR ago:
overheated it milion times (10500kv motor, 7.4V, overgeared-130km/h) and overheat-protection works well, it's still runing...
settings are briliant!!!!
LED's working properly
-fan DC is dead, needed to add 11.1V battery and new fan...
-Overall it's very good(maybe perfect) ESC, i'm not disapointed.
Very good power and temperature, but fan stopped at 5 min. And I replaced for an LRP, now everything is ok.Hi, HK fans I am using this in a converted Traxxas Nitro 4tec with a Turnigy TrackStar 3.5T Sensored Brushless Motor 9410KV .I had used others but they could not cut it. Even the first one of this ESC failed, but it was a faulty one and was replaced straight away. The replacement has worked very well an is used constantly. I would think you will have no trouble with it. This review is for the replacement ESC. Good luckThis is not going to be a good review.
After less than 2 min I got smoke.
Its the 8th of January I have put in a warranty claim to see how long it will take. It did come nicely boxed an was delivered to Brisbane very quick. Can some one tell me what the thing in the small round extension is, that was the thing that was smoking,any way I hope some one else reviews this an has better luck than I did.