Total Price


Cart 0 Cart 0 Loading...

HobbyKing® ™ Fury 3D Aerobatic EPP Airplane 800mm (ARF)

Generating Links

HobbyKing® ™ Fury 3D Aerobatic EPP Airplane 800mm (ARF)

Already Purchased Discontinued Product

Please continue searching for a similar product.
want FREE shipping? Click here to find out more!

The Fury 3D is an EPP profile model with a whole lot of attitude and wickedly good looks. The paint scheme is not only good for orientation but also very nice to look at. This model is constructed of ultra durable EPP foam, making it virtually "unbreakable". This makes it the ultimate plane for practicing your 3D maneuvers with or for flying in small places.

The Fury is purpose built to handle all out 3D aerobatics. The wing is one-piece design and features carbon reinforcement right out to the wing tips. This makes it very rigid and capable of handling the most extreme aerobatics. The control surfaces are massive providing the type of control you need for extreme 3D flying. The fuselage is reinforced in similar fashion from the nose to the tail, providing flex-free flight! The rear servos are mounted right at the back making for very short runs of the control rods. This offers fast, accurate elevator and rudder response ideal for 3D flight. The metal pushrods feature a Z-bend in one end which attaches to glass fiber control horns while the other end is secured to the servo horn with the included EZconnectors.

Thanks to its clever design, assembly of the Fury 3D is a breeze. All hardware is included, you will simply need add your own electronics. If you're looking for an all-out 3D aerobat that is easy to build, ultra durable and cheap to outfit with electronics, the Fury 3D is for you!

• Ultra durable EPP foam construction
• High visibility paint scheme - great for orientation
• Airfoiled wing featuring extensive carbon fiber reinforcement
• Massive control surfaces ideal for 3D flight
• Carbon reinforced fuselage for flex-free flight performance
• High quality glass fiber control horns
• Easy assembly

*Note: This is the ARF version only, motor shown in photos is NOT included.

Wingspan: 800mm
Fuselage Length: 955mm
Flying Weight: 350~400g

Fury 3D EPP airplane
Assembly manual

4CH transmitter and receiver
28-XX brushless outrunner motor
20~30A brushless ESC
8x4 or 8x3.8 SF propeller
Micro/mini servo x 4
11.1V 3S 800~1000mAh lipoly battery

Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Martin | Verified Buyer

  • Quality
  • Overall
  • Value

Great Pattern Plane - Not really 3d

Feb 13, 2017

All in all a great little plane. I like it.
I bought this plane to use on windier days. I find profile wings, & a relatively heavy weight cope much better in windier conditions. I kind of got what I expected as this is a re-badged Techone arrow, so quality is A1. I was expecting something that was not extreme 3d but more pattern like as the wing area is too small for the weight for "real" 3d.(Or at least with my ability anyway. ) And that is what I got.
Also as a real plus, it probably has the most robust landing gear on any of my light weight epp planes, except my crack beaver.
BTW: I am using.
AS2208 KV 1260 motor leftover from a Techone/hobbyking p-51
20 amp esc also leftover from a Techone/hobbyking p-51
700 mah turnigy 30 C xt30 battery - I doubt you could prop hang with a heavier battery
8x3.8 HY slow flow
12 gram metal gear emax ES08MA analog servos on aileron - I kept stripping cheapo plastic servos
8-9 gram cheapo analog servos on rudder & elevator

Todd | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Jan 20, 2015

This plane is better than the reactor. easy build and better locations for the servos.No strings. control surfaces stiffer & larger. Used digital metal gear servos. Flys great!!!
Buy 1 bottle of foam tac to build , & white gorilla glue for repairs.
Used a turnigy 2822/14 with a gws 8 4 prop . 1000 mah zippy fits the slot best.
Nanotech 850 runs longer. custom fit. Zippy 5.5 min flight. Nanotech 6.5 min.
Hovers nicely. Waterfalls , roll rate is marvelous.

Samanafatta | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 16, 2015

nice accessories!! vry good made esy to install,nice accessories!! vry good made esy to install,nice accessories!! vry good made esy to install,nice accessories!! vry good made esy to install,

| Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Nov 21, 2014

tres bon avion pour le 3D

uglystick40 | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Aug 20, 2014

I just wanted to mention...This kit is very nice...The wing and the fus are very ridgid!!!aswesome!!!!....My only problem is....The wing is to small!!!!!
if you just want to tear holes in the sky fine...but any high out.....I used a small axi outrunner 10x5 prop 1300 three cell to get the CG forward enough to fly...The roll rate is awesome....twitchy in a hover....waterfalls decent....I just wish the wing was bigger!!!!

Pawel | Verified Buyer

  • Quality
  • Value
  • Overall

Customer Rated

Apr 14, 2014

Nice looking, but unforgiving plane. Many of my trials of loops end rolls ends in violent spiral, often ended with nose in the ground.
HK Pitts EPP-CF is much easier and funny to fly...

josepdro | Verified Buyer

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Sep 12, 2013

Economico, muy ligero ideal para pequeos espacios

Customer files
landing gear reinforcement Download [283]
Patin de cola y refuerzo tren de aterriz Download [4458]
Patin de cola Download [2864]
Patin de cola1 Download [4132]
Patin de cola2 Download [4421]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!