Country
United States
 
Shipped From:

HobbyKing™ ECO6-10 200W 10A 6S Bal/Dis/Cyc Charger w/ acc.

HobbyKing™ ECO6-10 200W 10A 6S B...

Capable of charging any size Lipoly battery up to 6 cells or at 10A.
The ECO6-10 has an "Auto" fuction that sets the feed current automatically. 
The ECO6-10 includes an array of charging plugs and wires to suit almost any appl...
HKB610A

Now save save $0.00 $0.00

$39.99
OUT OF STOCK
697g
HKB610A

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combinez

et économisez plus
acc
Overview

Capable of charging any size Lipoly battery up to 6 cells or at 10A.
The ECO6-10 has an "Auto" fuction that sets the feed current automatically. 
The ECO6-10 includes an array of charging plugs and wires to suit almost any application and comes with JST-XH balancing plugs so you can charge and balance your ZIPPY/TURNIGY packs easily.
Input power is 10-18v, perfect for car batteries or a pc/laptop powersupply.

Features;
• Microprocessor controlled
• High power and High performance circuit with maximum power of 200W
• Delta-peak sensitivity (NiMH/NiCd)
• Individual cell balancing
• Li-ion, LiPo and LiFe capable
• Ni-Cd and NiMH capable
• Large range of charge currents
• Fast & Store function, allows safe storage current
• Time limit function
• Input voltage monitoring. (Protects car batteries at the field)
• Data storage (Store up to 10 packs in memory)


Specs:
Input Voltage: 10~18v
Circuit power: Max Charge: 200W / Max Discharge: 25W
Charge Current Range: .1~10.0A
Ni-MH/NiCd cells: 1~18
Li-ion/Poly cells: 1~6
Pb battery voltage: 2~24v
Weight: 480g
Dimensions: 143x119x42mm

Note: Power supply not included.

Specs

Additional Information

  • Blade Count:
    N/A
  • Diameter X(Inch):
    No
  • SKU
    HKB610A
  • Watt Hour
    0.00
  • Weight(g):
    697.00
  • Length:
    195.00
  • Width
    63.00
  • Height
    135.00
Discussion
Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Nice charger. It seems to balace lipo batteries well. Have used on nicd and nimh. So far it's been great for everythjng. The screen in nice and bright so its easy to see. So far so good.
The current indicator is not linear ! Worst charger ever! At 1 A the indication is almost correct, but at 5 amps it charges with 3 A.
Great charger for the price, one of the cheapest in the market, ran very smooth. Only thing wasn't too accurate was the battery voltage. saying that, it still did the job well.
charges 3 S lipo 3000 with 2A max - 4S Lipo 1.6 A max! anything higher quits after seconds because: TEMP ! My cheapest 50 W charger does better than that - not recommend buying
Mine just died after 2 months of daily use;( is there a warranty?. It says connection break????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
I already wrote a review for this before when I was coming from a fake iMax B6, and this was so much "better" because it was more powerful. In all honesty, I cannot recommend this charger, as my fake B6 actually charges my lipos more accurately! This charger did work for all my 3S batteries, both balance charging and discharging to storage level. When I tried discharging a 4S to storage level, the thing went up in smoke! I set it at 1.4A discharge (16.8V*1.4A=23.5W, below 25W limit), I should hope that it would be able to handle this, but apparently that is too much to ask. Now that I've had this a while, it makes no sense that I bought it, because it would charge my 4S batteries so unbalanced (In balance mode!) that my cells would be up to 60mV out of each other! Cannot recommend this product...
Just got this charger today and put it through its paces, seems to work well and looks great with a crisp feel to the 4 buttons. Power input leads are short with banana plug ends and output leads contain one end I have never seen before ... phone plug with a nut on the negative contact? The bottom is all vent holes raised up on rubber feet and when the fan kicks in it runs very quiet keeping everything cool. Reading the instructions I finally found how to enable the Auto charge current mode ... press both Inc and Dec buttons!!! The big selling point however is the half year sale price ... has can you not buy one ... or two? They mention a software CD to gain access through the USB port... will see if there is one.
Good quality charger. metal
Nice and cheap charger but unfortunatly it suffers from overheating issues. Can't charge 4S batteries at 10A without it stopping halfway through with a temperature alarm (outside approx 15c).

Been using it at 7.5A and it has performed well but don't expect to crank out 200W out of it.
Charger is great for the price, was a great investment :)
View all reviews
Video
Upload video
File

Combinez

et économisez plus
acc

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.