HobbyKing™ Quattro 4x6 can charge four batteries packs simultaneously no matter what battery type you have.The Quattro 4x6 is equipped with 4 high performance microprocessors to charge each battery individually. It's efficient cooling system ensures safe operation throughout the charge or discharge process.With the Quattro4x6 you're able to balance charge a lipoly pack on Port-1 while series charging a LiFePo4 or NiMH battery on Port-2. All ports work independently of each other.
Spec.Operating voltage range: DC 11~15VPower source: 12V DC
Charge power: 50watts, current is regulated accordinglye.g. 11.1V battery, charge current approx. 4.5Ae.g. 22.2V battery, charge current approx. 2.2ADischarge power: 5 Watts, current is regulated accordinglyCell count : 1-15 Ni-xx / 1-6 Li-xx / 1-10 Lead acid cells (2~20V)Current drain for balancing li-xx: 300mACharge termination Ni-xx: Automatic, negative Delta Peak methodCharge termination Lead acid & Li-xx: Automatic, voltage dependent, CC-CV processDimensions: 225.4 x 158.6 x 62.4mmNet weight: 1.09kg
I have two of these chargers for 3 years now. One has failed on one port, the other still works fine. I have reached out to HK US Support and no one offers repair services on this charger. I also miss the Internal Resistance check function that is available on other chargers. I have since purchased two other brand chargers and have compared performance between the three models. The other two brands are more accurate and give the same readings after charging my test batteries and this has been confirmed by two separate LiPo voltage/balance tester. If you need four ports, this charger is a good value as long as it works. Personally I found I only really need two ports and for just a few dollars more I found one that has built in AC plus DC supply capabilities, IR checker, and has the same basic programming.This charger is very intuitive and works great. It comes with all kinds of additional cables and adaptors.This charger is awesome when it comes to charging multiple batteries. Pair this charger with http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=26575 and its a good to go. But pls do get additional charge balance board (x3) http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=10360 and banana leads(x3) http://www.hobbyking.com/hobbyking/store/uh_viewitem.asp?idproduct=18099 as the package only include 1set. It would also be advisable to get some of these to suit the batteries that have these connectors http://www.hobbyking.com/hobbyking/store/__14855__4mm_Banana_Plug_to_6_x_Male_XT60_in_parallel.html
Or this harness to practically use for various battery type plug http://www.hobbyking.com/hobbyking/store/__6697__Charging_harness.html
This charger is everything I could ask for and more. You can charge 4 batteries at once and different battery types as well. I bought he turnigy 1080watt power supply as well and this thing rocks.I bought this charger about 4 months ago. It started breaking down by itself. Started with one charging part showing constant voltage error messages and now all the four do that. Sometime I can charge 2 batteries but I cant charge all 4 batteries at a time. If i do, I get the voltage error messages. I use the hobbyking 350w 25A power supply.Well made item, good product, no problems so far, charged discharged 20plus battery'
s, easy to understand menus, well worth the money.This charger works great. I have it hooked to an old Tripplite 40 amp PS. I charge 2 5000 Lipos and 2 4000 Lipos at 5 amp and 4 amp simultaneously and it barely gets warm. Identical setup to the Accucel 6 charger. Basically 4 separate Accucel 6 chargers in one unit. Mine came with a great manual. They must have updated the product. Had to calibrate each port (same calibration procedure as Accucel 6). Thanks Hobbyking!Simply perfect!
All you will ever need for the hobby!Brilliant charger. I hacked a 12V computer power supply to run it. Make sure you get one with enough wattage/amperage to supply what you're drawing. Keep in mind each channel is limited to 5A.I purchased two of these in March '14 and am very happy with them. I put one on a 110v-12v 200 watt power supply to use and home and the other plugs into my 12v power outlet on my Suburban to charge batteries while I am at our RC Flying Field. The work very well and are very accurate. I have used them to bring back to life some LiPo's that were run down below the normal level and they totally balanced and revived them. This is the same charger with the same internals as several name brand versions with a much higher price. Five Crowns all around!!
instructions download now [1775kb] Quattro Flow chart only - CR download now [299kb] No File Name download now [1775kb] manual download now [3444kb] Quatro4x6 download now [1775kb] No File Name download now [1775kb] HobbyKing_Quattro_4_Manual.pdf download now [3444kb] Menu Tree 4x6S Hi-Res.pdf download now [474.57Kb] Menu Tree 4X6S Hi-Res download now [474.57Kb] MANUAL download now [3.36Mb]