Introducing the HobbyKing™ Wingnetic, the distant cousin to our much loved Super Kinetic. Like its cousin, the Wingnetic is a very versatile airplane. Capable of carving out high speed passes both powered and un-powered, though throttle back, let it coast, and she slows down nicely.
The Wingnetic features a fully molded EPO foam airframe which is strong, light, and quick to assemble. Want to optimize your own setup, we offer it in three versions, plug and fly, ARF w/ Motor, or ARF (no electronics). To give it better response, a 1 piece carbon wing spar is pre-installed. A powerful 1200kv outrunner(required) with folding propeller rockets the Wingnetic from your hand climbing to altitude in seconds.
As it has a regular elevator and separate ailerons, all you need is a simple radio, no mixing needed. Add to that a small 3S 11.1V 800mAh battery & your own choice of serovs, outrunner and you have yourself a fun little plane. Access the motor through the front hatch, while the battery and receiver can be reached through the rear hatch. Since the Wingnetic is a belly lander, the bottom and wing tips have pvc protection adding to the durability of the model.
In addition to being a fun power plane, the Wingnetic's ultra clean airframe makes it a great slope glider, with or without motor assist. Due to the low parts count you can be tearing up the skies in a matter of minutes. The compact nature of the Wingnetic makes it the ideal leave it in the car airplane, or pack it along with you on a hike.
Check out the HobbyKing™ Wingnetic for fast flying fun!
• Almost Ready to Fly - Add your choice of electronics and fly!
• Wide flight envelope from high speed aerobatics to off-power gliding
• foam construction
• Folding prop and spinner included
• Easy access magnetic battery hatch
• Quick assembly, low parts count
4CH transmitter and receiver
3S 11.1V 800~900mAh Lipoly Battery
3 x 5~6g Servos
2630 1200KV B O
Don't use the CG they give. I flew mine at 185 mm measured from front of firewall.
Felt very good at that dimension. Possibly go back a bit further as I get more flights.
I used power upgrades . Turnigy 2826 2200kv motor. 40A ESC . 1300 4S Bolt battery
( just charged to usual Lipo voltage) 6x4 solid prop. HTX900 servos. It needed weight in the nose , even with the motor mounted in front of the firewall. Don't bother with the foam battery cover , it won't fit over battery anyway. Fly's very much like a Radjet with same gear.
I think probably better , as it doesn't have the elevons that the Rad has.Update, flies beautiful. Do not use CG on instructions though. Go with 235-240mm
and set elevator at 1 mm up for reflex. Use 3mm rate and lots of expo. Launch underhand. Do this and you will really enjoy flying this plane. Flies quick, straight, and glides. Landings are easy glide in.Came undamaged, all parts there. Nice looking quality, everything fit good. Great price. Using a reversed shaft, 2822-1450kv motor in mine. 20A ESC. Haven't flown yet,