The lightweight kit comes with 425mm Blades which provides rock solid stability and dynamic maneuverability. Equipped with Blades and all electronic gears except Battery and GAUI GU-365 flybarless E-stabilizer (FES).
Rigid and lightweight CF main frame comes with two sizes of servo mount for installing and Total weight of 1350g.
1400kv BL motor,ESC 60A/25V with built-in SBEC, FRP Canopy, 425mm CF blades, and hollow main mast are all included in kit.
Precision CNC anodized aluminum Swash Plate, guide and the best power to weight ratio (971 W / KG) gives excellent 3D capability.
Multi-stage gear reduction system provides more gear ratio options for different power system and new designed 8mm one way gear shaft provides high-efficiency power transfer.
Streamline cabin and canopy and push-pull linkages on CCPM mechanism limits any play for sharp control response.
Torque tube driven tail rotor and 90% factory assembled.
All mechanism equipped with Precision CNC Parts and Fully equipped ball bearings.(35 pieces of micro bearings)
Overall length: 900mm (including cabin & canopy)
Main rotor diameter: 965mm
Main blade length: 425mm
Tail rotor diameter: 217mm
Tail blade length: 70mm
Overall height: 310 mm
Overall width: 80 mm
Motor: 1400kv external brushless motor (included)
ESC: ESC 60A with built-in SBEC (included)
Total weight: 1350g (Equipped with Blades and all electronic gears except Battery).
Main rotor blades: 425mm CF Blades(included)
Flying duration: 5~6 minutes with 11.1v/2200mah Li-Po battery 2 packs in series(22.2v)
6 (or more) channel heli-capable transmitter (with CCPM function)
4 servos (digital servo is recommended)
6 (or more) channel receiver
GU-365 Flybarless E-Stabilizer(FES)
Battery : Li-Po battery 3S1P (11.1v / 20C or more / 2000mah or more)*2 packs in series or 6S1P (22.2v/ 20C or more / 2000mah or more)*1 pack
Charger: Li-Po battery charger
The remarkable size of the helicopter 500. Good quality construction and materials. Very stable in flight.
The only drawback, a bit narrow frame.Superbe machine , usinage alu et carbone a la perfection , un bijoux !!
avec le module gaui fbl , un gy401/5792 et 3 servos hitec digi mg , command par une jr 12xJust arrived carefully packed in double box. All major parts mostly preassembled and everything is intact. 60A ESC with governor, 504 motor, 14T pinion and some hardware are
included. Carbon blades and FG canopy with decals were there too. I think I am happy
with the purchase.
By the way, carbon frame sides have pre-cut slots for
futaba/mks mini size servos on one side and standard size
servo slots on another.j ai hate de recevoir cet helico sans barre de bell et anticouple a cardan
le cardan a une prise plus direct que la courroie et transmet l effort sans decallage