Total Price


Cart 0 Cart 0 Loading...

HydroPro Inception Brushless (RTR) Deep Vee Racing Boat 950mm (Red/Black)

Generating Links

HydroPro Inception Brushless (RTR) Deep Vee Racing Boat 950mm (Red/Black)


Now save save $0.00 $0.00

Shipped From:
  • USA
  • Global
Already Purchased
In Stock
want FREE shipping? Click here to find out more!

The original Inception was a force to be reckoned with, it has now got even better with this updated model. The water-cooled 1300KV brushless outrunner motor has been further improved and the water-cooled 90amp ESC has been replaced with a 120amp version. This set up will give you blistering speeds in excess of 80km/hr across your favorite boating lake. Added to this it has also been given a new stylish and attractive black and red color scheme that really makes it stand out from the crowd and will cause heads to turn at your favorite boating lake. The Inception still retains the well-proven ABS deep-vee hull which gives it the incredible speed and stability in a straight line but also enables it to dig in and turn on a dime.

The popular features that have been retained are adjustable stainless steel turn fins, adjustable rear strudder unit for choppy or smooth conditions, and a choice of 2 battery/propeller combinations for different high-end speeds. This ready to run version is complete with a Hobbyking GT2E AFHDS 2A 2.4GHz 2 channel radio system with a waterproof receiver and a powerful 9kg steering servo. Drive from the motor to the highly efficient 2 blade metal propeller is courtesy of a very strong 5mm flexible direct drive system and steering is accomplished with an outboard strudder unit. This metal unit supports the propeller end of the flexible drive system parallel to the hull for optimum thrust, it can be adjusted slightly for different water conditions and it also places the rudder unit in the optimum position for accurate and controlled steering. All this comes in a ready to run format, no building required, so all you have to do is supply the battery system of your choice and you are ready to go.

The 2 battery combinations are:
2 x 5000mAh 2S (7.4V) in series to give 14.8V. These with the supplied P1.4 x 60mm metal propeller will give speeds in excess of 60km/hr.
2 x 5000mAh 3S (11.1V) in series to give 22.2V. These with the supplied P1.4 x 56mm metal propeller will give speeds in excess of 80km/hr.

Important Note: You must use the correct propeller for the number of cells you are using, failure to do so will result in the motor and ESC being overloaded and possibly burning out.

• Powerful brushless water-cooled motor system with updated 120amp water-cooled ESC
• Ready to run and supplied with a Hobbyking GT2E 2.4GHz digital proportional radio system and powerful rudder servo
• Deep Vee hull for excellent stability and maneuvering
• 2 highly efficient surface piercing metal 2 blade propellers for 2 different battery combinations
• Adjustable stainless steel turn fins
• Strong 5mm flexible drive shaft with adjustable rear strudder support which includes metal water pick-up
• Striking red and black color scheme

NB: A full range of spares will be available shortly, when available they will be added to the related products below, please watch this space.

Type: HydroPro Inception Brushless RTR Deep Vee Racing Boat
Hull Length: 950mm (37.4in)
Total Length: 1060mm (41.7in)
Beam: 260mm (10.2in)
Hull/Superstructure Material: Strong durable ABS
Speed: 80+km/hr (with 6S set up)
Motor: 1300KV water-cooled brushless outrunner
Speed Controller: 120amp brushless w/BEC
Drive: 5mm direct drive flexible shaft
Radio System: Hobbyking GT2E AFHDS 2A 2.4GHz 2 Channel Radio System w/ Waterproof Receiver
Rudder Servo: Powerful 9kg unit
Color: Red/Black

2 x 7.4V (2S) 5000mAh or 2 x 11.1V (3S) 5000mAh LiPo battery packs
1 x Intelligent multi-function lipo battery charger
4 x "AA" batteries for the transmitter

Please note: A copy of the instruction manual can be found under the "Files" tab.

Important: This manual must be read before operating the Inception, there are some very important checks to do before use.

  • First run of HydroPro Inception Brushless RTR Deep Vee Racing Boat
  • HydroPro Inception Deep Vee Racing Boat Promotion Video
  • Original HydroPro Inception Brushless RTR Deep Vee Racing Boat 950mm (Yellow/Black) Unboxing
  • HydroPro Inception Brushless (RTR) Deep Vee Racing Boat - Product Review
  • Hydropro Inception Brushless Deep V Unboxing
  • Mod Tech Monday - How to Upgrade the HydroPro Inception Racing Boat to 12S
Upload video

Only registered users can upload video. Please, log in or register

Sort by
Most Recent Topics
* Nickname:

* Your Reply:

Please, enter the text shown in the image into the field below
*Verification Code:
Post a new Topic
* Nickname:

* Your Topic:

Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

snelle jelle | Verified Buyer

  • Quality
  • Overall
  • Value

verhoudings gewijs ivm prijs

Sep 20, 2021

boot vaart op 4s sloom,maar op 6s is het een raket,moet alleen een extra watercooling creeeren,wordt gloeiend heet,de xjt pluggen zaten vast gesmolten

WilliP | Verified Buyer

  • Quality
  • Overall
  • Value

Ein gutes Angebot

Aug 28, 2021

Ein gut ausgestattetes Boot mit Aluteilen. Aus der Packung heraus sofort gute Fahrleistungen. Die Farbgebung ist in sehr gut. Es gibt keine Ränder, alles liegt unter dem Klarlack. Die Motorkühlung ist nicht optimal, da ein Außenläufer eingesetzt ist. Hier wird nur die Motorhalterung gekühlt. Der ESC hingegen wird gut gekühlt.

Axel | Verified Buyer

  • Quality
  • Overall
  • Value

Für den Preis ein gutes Boot

May 28, 2021

Ein sehr gut laufendes Boot mit toller Wasserlage. Die Geschwindigkeitsangabe ist allerdings sehr optimistisch. Mit 4 S läuft es ca. 54 kmh, mit 6 S 65 kmh. Aber nur für ein bis zwei Minuten kann sind Motor und Regler glühend heiss. Da das Boot sehr gut läuft habe ich jetzt Regler und Motor gewechselt.

jamie | Verified Buyer

  • Quality
  • Overall
  • Value

Absolute joke

May 10, 2021

Absolute joke £261 turned into £350 including the delivery and then went to suggested batteries turning the total to £412. The suggested batteries had a different connector so had to folk out another £7 for an adapter xt90 to xt60 which isnt mentioned anywhere. When all that was sorted the tx and rx was faulty had no rudder control. I used another tx and rx which was working and went to throttle up and the flexi shaft came off the coupler and sank to the bottom of the lake shaft prop and everything in between. Water entered the boat though the shaft tube soaking the lipo's inside and hobbyking are not wanting to replace any parts!! Save your money and time and shop else where

shayne | Verified Buyer

  • Quality
  • Overall
  • Value

HydroPro Inception Brushless (RTR) Deep Vee Racing Boat 950mm (Red/Black)

Apr 27, 2021

awesome boat but make sure you have zero spark XT90 plugs and batteries 5000mah or over ! i have gps it at 81 kmh 6s 5200mah 60c ,only 70kmh with 6s less mah batteries, sounds amazing at top speed

? | Verified Buyer

  • Quality
  • Overall
  • Value

Tolles Boot für einen günstigen Preis

Apr 12, 2021

Das Boot läuft mit 4S und 6 S sehr gut. Allerdings muss man sich von den Geschwindigkeitsangaben nicht beeinflussen lassen. Mit 4S fährt es ca. 50 km/h, mit 6S ca. 60, und dabei werden die Akkus und der Motor schon ordentlich warm. 80 km/h sind mit dem Motor und dem Regler nicht zu erreichen. Aber sonst ein tolles Boot mit dem ich viel Spass habe!

Graham | Verified Buyer

  • Quality
  • Overall
  • Value

The Hydropro Inception

Mar 28, 2021

Week I ordered this boat and it came it did have a fault. Something went wrong almost straight away. But never the less hobby kind sent me a replacement. And I have to say wow I was over the moon with the new boat so far I have take in out 2 times and it has been amazing fun. And was happy in the end with the product price. I have ordered the smaller boat for my son for Christmas. And I’m sure he will love it as he loves watching mine. It will be nice when more upgrades( parts are available. I hope to se these in the nit so far future.
Charalampos | Verified Buyer Quality Overall Value
Impressive boat
Oct 29, 2020
Bigger is better!! I haven't run it yet. Probably this weekend. The only let down till now is the sealing of the cover. It just does not seals, so water comes inside. You need to also seal it from the external with tape. That's a pity. I think is something that has to be corrected.
Andres | Verified Buyer Quality Overall Value
Sep 17, 2020
First of all, I must say this boat is massive and powerful. I run mine on 6S lipo and man, this boat flies. achieves 50+ miles with ease. For ABS plastic it's sturdy but try not to hit a submerged item top speed or else it's game over. This boat is fun to drive and catches attention So the finish it all up a great boat & worth the money but would be nice to see price a little bit cheaper .XXX:000

Charalampos | Verified Buyer

  • Quality
  • Overall
  • Value

Running at 5s

Feb 28, 2021

The boat is running at 5s and the big prop. Some times at full speed. The sea is a little bit rough.
See in youtube .

MeXiCo | Verified Buyer

  • Quality
  • Overall
  • Value

HUUUUUGE Boat for that money

Jan 21, 2021

The Boat is huge, drivers very stable and fast like hell. You don't get a better Boat for that Money!

Charalampos | Verified Buyer

  • Quality
  • Overall
  • Value

Very very Impressive

Jan 11, 2021

I finally run it on 6s!! Very stable, turns on the spot, fast enough, fan to play with. The running motor sounds nice from far, so does the boat hitting small waves at full speed. The motor gets really really hot , you almost can' t touch it. Esc temp is ok. That is if you run it fast continuously. (with small prop of course).
Distance of transmitter? So far i have test it at about 180 meters with no problem.
Two issues however. First as i have mentioned in a previous report, water gets in from the cover. It has to be sealed with tape before you run it.
Second, water also comes in from the screws at the back (rudder, strud, etc). They have to be taken off, unscrew everything, put some silicone, and screw everything back again.
Now you can have all the fan! Totally i am very pleased. Worth the money.

  1. 1
  2. 2
  3. 3
Customer files
Inception Instruction Manual Download [5]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!