Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

ImmersionRC 700mW 2.4GHz Audio/Video Transmitter (US Version)

Generating Links

ImmersionRC 700mW 2.4GHz Audio/Video Transmitter (US Version)

Price:

Now save save $0.00 $0.00

$74.25
Shipped From:
  • USA
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
277000020-0
want FREE shipping? Click here to find out more!

The NexWaveRF based 700mW 2.4GHz audio/video transmitter greatly increases the range of your video link, adding a margin of security over commonly used 5.8GHz transmitters. Team this TX up with either a Duo2400 or Uno2400 for amazing image quality and range.

Built on the same game changing NexWaveRF technology that has made the ImmersionRC 5.8GHz transmitters such a renowned success the 2.4GHz audio/video transmitter is built on this proven technology to offer you the best possible image quality, durability and ease of use.

Sporting roughly the same size and weight as the ImmersionRC's 5.8GHz audio/video transmitters the new 2.4GHz audio/video transmitter brings a few features to market that will allow you to further reap the benefits of choosing ImmersionRC's equipment for your next FPV mission.

The 5V output has been beefed up to handle up to 1.5A of current output, which means you can power, and charge, your HD camera such as a Mobius, straight off of our audio/video transmitter. So no more fiddling with external 5V supplies, just hook it up and be done with it. 

The new 700mW 2.4GHz transmitter is designed to run straight off of your main flight-pack and supports a wide voltage input range of 6-25V (2~6s) direct. Due to its extremely low-noise and highly efficient switching regulator, there's no additional heat being generated when running off of higher voltages and the switching regulator's input is well filtered to cope with noise from your speed controller, or other electronics connected within your aircraft.

The NexWaveRF based 2.4GHz audio/video transmitter has a 700mW/28.5dB RF output power, putting it a notch above the commonly available 500mW 2.4GHz transmitters from other manufacturers. It features the same industry standard locking connectors for connecting your battery and camera or audio/video source as featured on ImmersionRC's other products.

This makes the new 2.4GHz audio/video transmitter fully compatible with the existing 5.8GHz audio/video transmitters; it can be swapped out directly as all the connectors, and connector pin-outs, are the same. This also applies to the SMA-female antenna connector used.

Features:
• 700mW transmitting power
• NexwaveRF based
• 5V 1.5A output for FPV camera and charging
• Small Size
• SMA Antenna Connector
• Onboard quiet switching regulator 2~6s direct capable

Specs:
RF Module: NexwaveRF
Power supply: 6~25V (2S-6S supply)
Power out (to camera): 5V, 1.5A max
Transmitting power: 700mW
Operating Frequency: 2.4GHz (2396, 2410, 2430MHz)
Dimensions: 57 X 23 X 12 mm
Weight: 18g (without dipole antenna) 

Attention Customers

** The use and operation of this product in some countries may require a license based on local government restrictions.  Ensure you check your local government rules before operating this device. **

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

VOiD | Verified Buyer

  • Overall
  • Quality
  • Value

Great!

Jan 04, 2023

Great VTX!

Charlie | Verified Buyer

  • Overall
  • Quality
  • Value

Arrived damaged beyond use.

Sep 14, 2022

The antenna connection is soldered to pcb pads... or it is supposed to be upon delivery. The SMA connector had broken at some point before it arrived and pulled the pads from the pcb so now I have what I assume was actually a decent vtx that is entirely unusable now because I cannot attach an SMA connector for an antenna.

Jack | Verified Buyer

  • Overall
  • Quality
  • Value

If your lost look in strange places LoL

Dec 14, 2016

I'd look in to the paper work on line form immersionrc and if there's nothing there for the 2.4-look up the 5.8 system & go off of that, I know you'll need a 2.4 receiver if you don't have one all ready and a compatible tx like the ezuhf somyout not swompim the video receiver with your 2.4 transmitter. Hope this helps.

Joe | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Dec 23, 2015

Not recommended if you don't already have robust FPV knowledge. No documentation provided or available. Currently it's not working with my FatShark goggles. Any ideas for where to turn would be super duper helpful! Thanks in advance everyone!

Customer files
ImmersionRC 2.4GHz 700mW A/V Transmitte Download [1264]
ImmersionRC 2.4GHz 700mW Tx.pdf Download [608]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!