Register

Product Finder

Settings

Useful links

 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • USA

KINGKONG 2204-2300KV Brushless Motor CCW

KINGKONG 2204-2300KV Brushless Motor CCW

QTY:

Now save save $0.00 $0.00

$8.72
Rating:
Stock:
Weight:
49 g
SKU:
426000044-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

These motors have been designed for the KINGKONG range of Multi-rotors but can be used in any multi-rotor. They give excellent thrust of 440g and can use 2-4S (7.4-14.8V) LiPoly batteries.

Specs:
KV(RPM/V): 2300KV
Voltage: 7.4-14.8V (2-4S LiPoly)
Max Thrust: 440g
Number of Poles: 12N/14P
Propeller: 5”-6”
Prop shaft: 5mm
Motor Shaft: 3mm
Diameter: 28mm
Length: 31.2mm
Weight: 26g
Bolt hole spacing: 16mm or 19mm M3

Includes:
1 x 2204-2300KV motor CCW
1 x prop adapter
5 x M5 screws

Product
Specifications

Additional Information

  • SKU:
    426000044-0
  • Brand:
    N/A
  • Weight(g)
    49.00
  • Length
    61.00
  • Width:
    3.00
  • Height:
    55.00
  • Kv(rpm/v)
    No
  • Max Currents (A)
    No
  • Power (W):
    No
  • Length B (mm):
    No
  • Can Length D(mm)
    No
  • Max Voltage(V)
    No
  • Shaft A(mm):
    No
  • Unit Weight (g):
    26
  • Diameter C(mm)
    No
  • Total Length E(mm)
    No
  • Resistance (mh):
    No
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
playlist_add_check Overall
trending_up Value
Great little motor, bought it a month ago and runs very well. Great bargain for the price,
verified_user Quality
playlist_add_check Overall
trending_up Value
playlist_add_check Overall
trending_up Value
verified_user Quality
Not a bad motor for the price
playlist_add_check Overall
trending_up Value
verified_user Quality
playlist_add_check Overall
trending_up Value
verified_user Quality
I use this motor with the FliteTest mighty miny series, I'm impressed with the quality and power of this cheap little motor. Almost identical spec to the Emax 2204 2300Kv, fraction of the price.
playlist_add_check Overall
trending_up Value
verified_user Quality
verified_user Quality
trending_up Value
playlist_add_check Overall
These work great! I used them in my homebuilt 250mm X8 project and I will definitely be getting more. If you are a hardcore racer then you'll be slightly disappointed BUT if you are a beginner or just a casual flyer, for the price these motors can't be beaten. Also they can handle a 4s battery very well. I've got around 20 flights all on 4s and haven't had a issue so far. I used 2 QAV 250 frames to build the X8.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just finished getting my second drone built and I chose 3 cw and 3ccw king kong 2204 motors! the ratings seemed good that I had read before I purchased them! But I have ran 10 packs through them and only 3s at that... and I have had one that the magnets started falling out, so I had to put in one of my backups already! And the other three the bearings are already toast! I should have stuck with the DYS 1806 I have had good luck with them!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Value is 0 if a product doesn't work.
I bought 6. Two had measurable differences between phases.
When they work they seem OK but I had some sync issues on one motor which would cause the quad to death spiral. Checked out the phases and resistance etc and this motor had gone south. Its not like I am going crazy with the quad and only on 4 cells. The wire wrapping and wire quality are highly suspect. (I took one apart and closely examined the windings).

You get what you pay for! Skip this and buy a $25 motor. Don't waste your money buying something and paying for shipping AND not flying for a week.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
received in good condition and very good for beginner to intermediate
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Side by side, these look exactly like the EMAX 2204-2300. EXACTLY... I am running a set with the xwing 20amp speed controls on an armattan f-1-6 frame. I have another set up exactly the same with the armattan house 2204 motors and the kingkongs seem to have the same or maybe a bit more power. Bearings look decent and overall appears to be a good quality product.. Took a couple good full speed whacks into the trees with no bent shafts or damage. Great value and a solid product.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little motor at a great price. Bought these for my FT Arrow and FT Mini F-22. Exact same specs as the Emax 2204 motor (same maker?) but at a better price. Love them.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I would recommend this motor if your running on a budget its great power for the buck, but 1 out of 4 motors i got the barring got broken after a few flights "thats why 4/5" but for the price its great so cant complain you get what you pay for.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
percy download now [78.41Kb]
percy download now [78.41Kb]
percy download now [78.41Kb]

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.