KINGKONG HEX 300 FPV Plug and Play (Green)
KINGKONG HEX 300 FPV Plug and Play (Green)
Copy and Share the Below URL
The KINGKONG team have done it again. Using their sharp and distinctive looking Hex 300 frame they have added a great package of gear to make an excellent Plug and Play package complete with FPV camera and Video TX.
The kit has everything you need from a pre tuned mini CC3D flight controller to down to the Spironet Antenna.
The motors are KINGKONG 1806-2280KV (CW and CCW) powered by KINGKONG 12A OPTO BLHeli ESC’s. With a UBEC (5v 3A) power to the PDB. 5040 Propellers will give you that unique HEX sound.
There is a preinstalled FPV camera and video TX so just tune in the channel and get flying. The FPV camera is angled so you see where you are going when the race is on.
Just to ensure that your competitors know where you are there is super bright LED strip at the rear as this will be the only part they will see.
This exciting packing not only looks the part but will give you hours of racing enjoyment at the right price.
Features:
• Fully molded unibody glass fiber reinforced chassis
• KINGKONG 1806-2280KV Motors (CW and CCW)
• KINGKONG 12A 2-4S OPTO BLHeli ESC’s
• KINGKONG 5V-3A UBEC
• Power and Video distribution board with XT60
• Mini CC3D Flight Controller
• 5040 Propellers (CW and CCW)
• FPV Camera 1000TVL CMOS
• 200mW 5.8GHz Audio/Video Transmitter
• 5.8GHz Circular Polarized Spironet Antenna
• Action camera mount
• Super bright LED module (Make sure your competition knows it's you over taking them!)
Frame Specs:
Wheelbase: 300mm
Weight: 179g (bare frame)
Material: Nylon+Fiber
Motor Specs:
KV(RPM/V): 2280KV
Voltage: 7.4-14.8V (2-4S LiPoly)
Max Thrust: 440g
Number of Poles: 12N/14P
Propeller: 5”-6”
Prop shaft: 5mm
Motor Shaft: 3mm
Diameter: 28mm
Length: 31.2mm
Weight: 26g
Bolt hole spacing: 16mm or 19mm M3
ESC Specs:
Input Voltage: 7.4-14.8V (2-4S LiPoly)
Constant: 12 Amps
Burst: 20 Amps (5sec max.)
BEC: No BEC, OPTO only
Dimensions: 50x16x6mm
Weight: 7.5g (with wires)
UBEC Specs:
Input Voltage: 6V~28V/DC (2-4S LiPoly)
Output Voltage: 5V
Ripple: Constant: 3 Amps
Dimensions: 53x17x7mm
Weight: 12g
Camera Specs:
Format: PAL
TVL: 1000
Sensor: CMOS
Lens Type: F2.0/2.8mm (IR-CUT)
Input Voltage: 5 ~ 12V DC
View Angle: 120deg
Video TX Specs:
Modulate: Wideband FM Modulate
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Output Power: 23~24dBm
Channel: 32CH
Operating Voltage: 7V~24V
Supply Current: 190mA
Operating Temperature: -10~85
Video Band Width : 0~8.0 MHz
Audio Carrier Frequency: 6.5MHz
Video Input Level: 0.8~1.2 Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5~2.0 Vp-p
Audio Input Impedance: 10K Ohm
Connector: RP-SMA
Dimension: 40mm x 23mm x 8mm
Weight: 10g (without antenna)
Channels:
Band A: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
Band B: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
Band E: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
Band F: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
Includes:
1 x KINGKONG HEX 300
20 x 5040 Pros (10CW + 10CCW)
1 x Spironet Antenna
1 x ESC PC software communication adapter
1 x Action Cam dampened mount
1 x Cable pack
1 x Cable tie pack
1 x Antenna mount set
1 x USB Cable
Required:
5-6 Channel RX/TX
1300-2200mah 11.1V ;1000-1800mah 14.8V
