KINGKONG HEX 300 FPV Plug and Play (Red)

The KINGKONG team have done it again. Using their sharp and distinctive looking Hex 300 frame they have added a great package of gear to make an excellent Plug and Play package complete with FPV camera and Video TX.

The kit has everything you need from a pre tuned mini CC3D flight controller to down to the Spironet Antenna.

The motors are KINGKONG 1806-2280KV (CW and CCW) powered by KINGKONG 12A OPTO BLHeli ESC’s. With a UBEC (5v 3A) power to the PDB. 5040 Propellers will give you that unique HEX sound.

There is a preinstalled FPV camera and video TX so just tune in the channel and get flying. The FPV camera is angled so you see where you are going when the race is on.

Just to ensure that your competitors know where you are there is super bright LED strip at the rear as this will be the only part they will see.

This exciting packing not only looks the part but will give you hours of racing enjoyment at the right price.

Features:
• Fully molded unibody glass fiber reinforced chassis
• KINGKONG 1806-2280KV Motors (CW and CCW)
• KINGKONG 12A 2-4S OPTO BLHeli ESC’s
• KINGKONG 5V-3A UBEC
• Power and Video distribution board with XT60
• Mini CC3D Flight Controller
• 5040 Propellers (CW and CCW)
• FPV Camera 1000TVL CMOS
• 200mW 5.8GHz Audio/Video Transmitter
• 5.8GHz Circular Polarized Spironet Antenna
• Action camera mount
• Super bright LED module (Make sure your competition knows it's you over taking them!)

Frame Specs:
Wheelbase: 300mm
Weight: 179g (bare frame)
Material: Nylon+Fiber

Motor Specs:
KV(RPM/V): 2280KV
Voltage: 7.4-14.8V (2-4S LiPoly)
Max Thrust: 290g
Number of Poles: 12N/14P
Propeller: 5”
Prop shaft: 5mm
Motor Shaft: 2mm
Diameter: 23mm
Length: 30mm
Weight: 24g
Bolt hole spacing: 16mm or 19mm M3

ESC Specs:
Input Voltage: 7.4-14.8V (2-4S LiPoly)
Constant: 12 Amps
Burst: 20 Amps (5sec max.)
BEC: No BEC, OPTO only
Dimensions: 50x16x6mm
Weight: 7.5g (with wires)

UBEC Specs:
Input Voltage: 6V~28V/DC (2-4S LiPoly)
Output Voltage: 5V
Ripple: Constant: 3 Amps
Dimensions: 53x17x7mm
Weight: 12g

Camera Specs:
Format: PAL
TVL: 1000
Sensor: CMOS
Lens Type: F2.0/2.8mm (IR-CUT)
Input Voltage: 5 ~ 12V DC
View Angle: 120deg

Video TX Specs:
Modulate: Wideband FM Modulate
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Output Power: 23~24dBm
Channel: 32CH
Operating Voltage: 7V~24V
Supply Current: 190mA
Operating Temperature: -10~85
Video Band Width : 0~8.0 MHz
Audio Carrier Frequency: 6.5MHz
Video Input Level: 0.8~1.2 Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5~2.0 Vp-p
Audio Input Impedance: 10K Ohm
Connector: RP-SMA
Dimension: 40mm x 23mm x 8mm
Weight: 10g (without antenna)

Channels:
Band A: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
Band B: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
Band E: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
Band F: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880

Includes:
1 x KINGKONG HEX 300
20 x 5040 Pros (10CW + 10CCW)
1 x Spironet Antenna
1 x ESC PC software communication adapter
1 x Action Cam dampened mount
1 x Cable pack
1 x Cable tie pack
1 x Antenna mount set
1 x USB Cable

Required:
5-6 Channel RX/TX
1300-2200mah 11.1V ;1000-1800mah 14.8V

Upload video

Only registered users can upload video. Please, log in or register

Topics

Sort by

Most Recent Topics

Post a new Topic

Only registered users can write reviews. Please, sign in or sign up

The Hex 300 is King | Verified Buyer

Overall
Quality
Value

Awesome Hex 300

Sep 03, 2019

Tremendous value and great fun. This is my first FPV and still needing to set that up with googles but otherwise love the flight characteristics and stability of the KingKong Hex 300. Had a few issues with firmware updates using LibrePilot GCS but finally got through that and got the multi-rotor all setup and flying beautifully. Great value!

Jason | Verified Buyer

Overall
Quality
Value

Hex 300

Aug 20, 2019

Had a little bit with the CC3D programming as it had be upgrade to the latest firmware version before I could set it up but once past that it was easy to configure and fun to fly. Great value

Washington | Verified Buyer

Overall
Quality
Value

Nice Hex

Apr 30, 2018

This flies really nice, for what it is. Acro feels OK once you turn up the rates.
As all other quads and hexes made of plastic/GF, this one is not REAAALY durable. This one is specially vulnerable, since it has a PDB with a BEC on the bottom plate.
But if you don't wanna go crazy and crash a lot with this, it can be fun! Otherwise look for a CF quad.
Good for the price, flies nice!

Mateus | Verified Buyer

Overall
Quality
Value

Super Teil

Apr 05, 2018

Bin überrascht von der Qualität. Frame macht einen stabilen Eindruck. Allerding ist die Flightcontroll uralt. Werde diese gegen was modernens ersetzen. ANsonsten bin ich sehr zufrieden

allain | Verified Buyer

Overall
Quality
Value

nice drone butt

Dec 09, 2017

it came with no manual and no reciever this normly buth if you don't now it's not fine you must buy one and the manual is a bitch you don't now how to connect the box to reciever

Sebastian Alonso | Verified Buyer

Overall
Quality
Value

.....

May 19, 2017

he comprado uno...hace cinco meses y medio....nunca llegó.....

Roy | Verified Buyer

Overall
Quality
Value

Very nice!

Apr 03, 2017

I'm new to fpv racers. I know that for 90$ this is an outstanding deal. Flies good. Crashes very well. I smacked it into the ground a couple of times now and only a bent blade. Still flying perfectly. I would recommend strapping the antenna down better and take the stress off of the 5.8 transmitter.
Outstanding value!

Gerry | Verified Buyer

Overall
Quality
Value

Hexa setup

Nov 10, 2016

hello all , i bought one of these great little hexa copters. I have heaps of quads and know the cc3d board very well . This Hexa has an issue where it wants to rotate to the left and I can't seem to fix it ?? can somebody send me there setup please. or post it.

Thanks

Gerry | Verified Buyer

Overall
Quality
Value

Hexa setup

Nov 10, 2016

hello all , i bought one of these great little hexa copters. I have heaps of quads and know the cc3d board very well . This Hexa has an issue where it wants to rotate to the left and I can't seem to fix it ?? can somebody send me there setup please. or post it.

Thanks

Gerry | Verified Buyer

Overall
Quality
Value

Hexa setup

Nov 10, 2016

hello all , i bought one of these great little hexa copters. I have heaps of quads and know the cc3d board very well . This Hexa has an issue where it wants to rotate to the left and I can't seem to fix it ?? can somebody send me there setup please. or post it.

Thanks

Customer files

FC-RX Connection Guide

Download [351]

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Settings

Choose language

Settings

Choose Currency

Settings

Choose Country