KongCopter FH800 Pro Hexa-Copter (PNF)

The KongCopter series of multi-rotors are a favourite choice of aerial photography specialists, amongst whom their reputation for great performance and reliability is well known.

The KongCopter FH800 Pro hexa-copter is no exception to this and, as a top of the range, professional level heavy-lift camera platform it is designed and built to exacting standards for performance without compromise.

Strong, fold-down arms on the FH800 PRO allow it to be stored and transported  in the minimum of space for a multi-rotor of this size, while on site assembly is as simple as locking the arms into position using the single-action locks!

Woven carbon fiber sheet and tubes give the model incredible strength without a great weight penalty and careful use of aluminum alloy parts provide secure mounting for the motors, arms and undercarriage.

The FH800 Pro features a heavy-duty equipment mounting frame also made from aluminum alloy and carbon fiber tube.

Six, super-smooth 4114 380kv out-runner motors are wired directly to the 40A ESCs incorporated under each motor mount and drive 15 x 5 inch carbon-composite folding propellers. Power to the motors is supplied from the central X-Cam Concentrator power distribution unit that also provides power to the retract and LED lighting units, and has an external supply for your camera and gimbal assembly. 

The huge payload capacity of 3.7kg gives the FH800 Pro a maximum AUW of 7.2kg fully laden, so it is more than capable of carrying a full DSLR camera setup (such as the Panasonic GH3/GH4 or Sony A7) for truly professional results and the recommended 6S 10000mAh LiPoly batteries will allow up to 17 minutes of flight time to do it in!

Features:
• Strong and lightweight folding structure
• Single action arm locking mechanism
• Servo-less retractable undercarriage
• Integrated ESCs
• X-cam Concentrator power distribution unit
• Woven carbon fiber structure
• Easy to Assemble, Upgrade and Maintain
• 3.7kg payload
• 17 minute flight time

Specs:
Wheelbase (diagonal): 810mm
Motors: 4114 380kv
ESC: 40A
Propellers: 15 x 5 carbon composite folding
Weight: 3500g (frame complete)
Max AUW: 7.2kg

Included:
FH800 Pro Hexa-Copter
X-Cam Concentrator
Propellers
Blade holders
Hardware
Manual

Required:
5000~10000mah 6s LiPoly battery
5ch Transmitter and receiver (Min)
Flight Controller
Camera gimbal
Camera
FPV equipment (optional)