Register

Product Finder

Settings

Useful links

 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global

MATEKSYS Flight Controller F405-OSD w/ Betaflight, Blackbox

MATEKSYS Flight Controller F405-OSD w/ Betaflight, Blackbox

QTY:
$31.90
Rating:
Stock:
Weight:
12 g
SKU:
090000032-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
Product
Description

The Mateksys Flight Controller F405-OSD comes with lots of features. From the high-speed, 168MHz, 32bit F405 processor to BetaFlight firmware and OSD this flight controller has the power to easily control your drone.

 

It also has a blackbox to help you fine tune your drone or to help determine what went wrong with any mishap. The OSD provides detailed information on battery voltage and other information.

 

The FC board is lightweight  (7g) and of standard FC size (36 x 36mm) to easily fit into any drone.

 

Features:
• 168MHz STM32F405RGT6
• 6-axis ICM-20602 (3-axis gyroscope. 3-axis accelerometer)
• BetaFlight OSD
• MiscroSD BlackBox
• VCP and 5 x UARTs
• 6 PWM/DSHOT outputs
• MatekF405 Target

 

Specs:
MCU: 168MHz STM32F405
IMU: 32K ICM20602 accelerometer/gyro (SPI) (6-axis)
Support 32K Gyro update & 16K PID Loop
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
Support SoftSerial on S5 & S6
Battery Voltage Sensor: 1:10
Current Sensor: No (FCHUB-6S option)
BEC 5V & 10V: No (FCHUB-6S option)
LDO 3.3V: Max.300mA for Spektrum RX
Spektrum BIND_PIN: RX4
WS2812 Led Strip: Yes
Beeper: Yes
RSSI: Yes
2x LEDs for FC STATUS (Blue, Red)
6x PWM / DShot outputs without conflict
5x UARTs
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x Side-press button for BOOT(DFU) mode
1x 16pin bottom mounted FFC Slot for FCHUB-6S connection
Size: 36x36mm PCB with 30.5mm mounting holes
Weight: 7g

 

Includes:
1 x Mateksys FC F405-OSD
1 x 0.5mm x 16Pin 5cm Flexible Flat Cable
4 x M3 Anti-vibration Standoffs

 

Requires:
1 x Micro SD card (Up to 4GB)

Product
Specifications

Additional Information

  • SKU:
    090000032-0
  • Brand:
    No
  • Weight(g)
    12.00
  • Length
    120.00
  • Width:
    2.00
  • Height:
    8.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

Overall
Value
Quality
I chose this f4 variant because I've always been surprised by the fit and finish of Maytek's products. It seems as if they actually get it. They go the extra mile in their design to make something that's well thought out and not just a soulless copy of what everybody else is doing. On top of that their price point always seems to strike the balance between just slightly higher than the cheapest option; all the while delivering an immeasurably better product. Soldering work on everything I've gotten from them is beautiful ( non of that sickly runny sweat-shop soldering you may be used to ). Great board, you do have to select the "show unstable releases" in betaflight firmware flasher to get the MAYTEKF405 Firmware target to show up.
Overall
Value
Quality
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.