New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Micro Spitfire w/ 5A ESC, BL-Motor, 2.5g Servo & LiPo

Micro Spitfire w/ 5A ESC, BL-Motor, 2.5g Servo & LiPo

Discontinued Product

Please continue searching for a similar product.
SKU:
MicroSpitfire
WANT FREE SHIPPING? Click here to find out more!
The micro Spitfire comes 90% pre-built and includes motor, ESC, LiPo battery and Servos.
You will need around 2hrs to complete this plane and only need to include your own Receiver.
 
Specifications:
Length: 460mm
Wingspan: 510mm
Flying weight: 90-100g
Motor: C10 Brushless outrunner
ESC: 5A/2S
Prop: 4 inch
Servos: 2x2.5g
Battery: 7.4V 2S 200mah Lipo
 
Required:
Your own TX & RX
  • SKU MicroSpitfire
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 479.0000
  • Length 437.00
  • Width 107.00
  • Height 125.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Arrived very fast. Don't think I would call it 90% built though. Assembly was quite easy even though the instructions were the usual waste of paper. If built straight from the box the dihedral is a bit much and the weight distribution is quite tail heavy. Anyone know the cg? I couldn't find it on the "instructions". Looks good finished but I haven't had time to maiden it yet due to bad weather. Looking forward to sorting it out.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arrived very fast. Don't think I would call it 90% built though. Assembly was quite easy even though the instructions were the usual waste of paper. If built straight from the box the dihedral is a bit much and the weight distribution is quite tail heavy. Anyone know the cg? I couldn't find it on the "instructions". Looks good finished but I haven't had time to maiden it yet due to bad weather. Looking forward to sorting it out.

I really love this plane now that I have made some essential mods and tuned it. Since it is small and light it makes it a challenge to fly it nice and stable but sure looks good when making low passes! See my video on canopy, dihedral, and aileron mods: http://www.youtube.com/watch?v=6HIhb9HvWjY

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I really love this plane now that I have made some essential mods and tuned it. Since it is small and light it makes it a challenge to fly it nice and stable but sure looks good when making low passes! See my video on canopy, dihedral, and aileron mods: http://www.youtube.com/watch?v=6HIhb9HvWjY

With a 5030 and 360mah Rhino battery, I get just a little bit less than 30Watts at about 4 amps. Netheir the motor or ESC seem to mind after 7 flights. Don't know if they run hot (unaccessible) The motor could likely use a few ventilation holes. It doesn't fly too good inverted (again, too much dihedral). VERY FAST with the mod (Did it before second flight, didn't like the look of the 4025, as it looked too small for the plane)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

With a 5030 and 360mah Rhino battery, I get just a little bit less than 30Watts at about 4 amps. Netheir the motor or ESC seem to mind after 7 flights. Don't know if they run hot (unaccessible) The motor could likely use a few ventilation holes. It doesn't fly too good inverted (again, too much dihedral). VERY FAST with the mod (Did it before second flight, didn't like the look of the 4025, as it looked too small for the plane)

5 Stars because you get a C10 motor, servos and ESC so basically the plane/foam is free.



Original battery: 13.3 gr

Prop: look like a 4025

Plane ready to fly: 92.7 gr

Con: Too much dihedral.Slightly under power for it's weight with original battery and propeller. No adapter for my AR6300. Need to land under power but not done tweaking (only 7 flights)



Modifications: 5030 prop and 360mah Rhino



Pro: With the mods, this plane fly great and FAST



verified_user Quality:
trending_up Value:
playlist_add_check Overall:

5 Stars because you get a C10 motor, servos and ESC so basically the plane/foam is free.



Original battery: 13.3 gr

Prop: look like a 4025

Plane ready to fly: 92.7 gr

Con: Too much dihedral.Slightly under power for it's weight with original battery and propeller. No adapter for my AR6300. Need to land under power but not done tweaking (only 7 flights)



Modifications: 5030 prop and 360mah Rhino



Pro: With the mods, this plane fly great and FAST



Super, hello HobbyKing, please add in this micro size full 3D acrobat (etc. Extra 260 or secoond). Thanks, Petr

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super, hello HobbyKing, please add in this micro size full 3D acrobat (etc. Extra 260 or secoond). Thanks, Petr

Customer files
No File Name Download [182]
No File Name Download [148]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!