New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

MicroPower & DataRecorder RPM Sensor

MicroPower & DataRecorder RPM Sensor

Discontinued Product

Please continue searching for a similar product.
SKU:
RPM-KIT-MAG
WANT FREE SHIPPING? Click here to find out more!

MicroPower & DataRecorder RPM Sensor

Hall Effects RPM Sensor with 4 magnets (RPM-KIT-MAG)
Measures RPM to 50K+. See the MicroPower Instruction manual for details on how to use the Hall RPM Sensor.

For more information, click below;
http://www.eagletreesystems.com/MicroPower/micro.htm

 

  • SKU RPM-KIT-MAG
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 9.0000
  • Packaging Length 133.00
  • Packaging Width 3.00
  • Packaging Height 99.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Original part for a good price. Thx for this.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Original part for a good price. Thx for this.

Great if you're going to fly helis, but it is a bit of a gimick on fix wing IMO. I fly FPV and this just provides me with interesting but useless information about prop speed. What you really need is airspeed and amp draw which you can get from the other eagletree expanders.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great if you're going to fly helis, but it is a bit of a gimick on fix wing IMO. I fly FPV and this just provides me with interesting but useless information about prop speed. What you really need is airspeed and amp draw which you can get from the other eagletree expanders.

The magnets are easy to mount. I use a drill and heat shrink tubing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The magnets are easy to mount. I use a drill and heat shrink tubing.

this installed on my HK450 to check the head speed, There is a spot on the main gear for the magnets already. it works great and I am going to buy more because i am leaving it on the heli full time. thanks

HK

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this installed on my HK450 to check the head speed, There is a spot on the main gear for the magnets already. it works great and I am going to buy more because i am leaving it on the heli full time. thanks

HK

works great on 450 heli's or bigger i drill a small hole on my main gear and glue the magnet to it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great on 450 heli's or bigger i drill a small hole on my main gear and glue the magnet to it

Nice and cheap :) Could wish for high flexibility silicone wires but its not up to HK but Eagletree.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice and cheap :) Could wish for high flexibility silicone wires but its not up to HK but Eagletree.

It needs some good placement and secure fixing, but it will give better reading results than the rpm brushless sensor i had previously.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It needs some good placement and secure fixing, but it will give better reading results than the rpm brushless sensor i had previously.

Make sure that the gap between the magnet and the sensor doesn't exceed 2mm!

Works perfect with the V3 elogger.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Make sure that the gap between the magnet and the sensor doesn't exceed 2mm!

Works perfect with the V3 elogger.

1 point less due to handling:

- Hall probe and magnet have to be within about 2 mm diameter.

- hall probe has to be mounted with the flat side (see picture) directed towards the magnet. That is the shrinking tube of the probe and the cable both have to be near the rotating structure. Especially a bit a problem if the magnets are glued into the corresponding holes of TRex main gears.



Positive: most direct (reliable) measurement of rpm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

1 point less due to handling:

- Hall probe and magnet have to be within about 2 mm diameter.

- hall probe has to be mounted with the flat side (see picture) directed towards the magnet. That is the shrinking tube of the probe and the cable both have to be near the rotating structure. Especially a bit a problem if the magnets are glued into the corresponding holes of TRex main gears.



Positive: most direct (reliable) measurement of rpm.

I use this to get rpm info on everything except electric helis. With them, i prefer the brushless motor sensor, which is easier to install on any number of helis.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this to get rpm info on everything except electric helis. With them, i prefer the brushless motor sensor, which is easier to install on any number of helis.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!