Beautifully molded and detailed the MIG-3 is a unique andï¿½fun model to fly.
Exceptional detail is included in the fibreglass moulded fuse, including exhaust stacks and panel lines.
Purpose built for electric brushless power. A 35 series outrunner will bolt straight in and a 2200mAh lipoly pack will balance the plane well.
The MIG-3 is made with a fibreglass fuse, balsar built-up wing and including all hardware.
Wing Span: 1065mm
Fuselage Length: 860mm
Wing Area: 18.7dm2RTFï¿½Weight : 1060-1280gPower system : 35 size outrunner or larger.Radio:ï¿½4 channelï¿½Required;
Receiver/Transmitter 4ChMotor : 35 size outrunner.30A ESC4 Servos (9g or larger)ï¿½*Propeller shown in image not included.
Great model looks as good as in the pictures.
Tail tricky to attach,no hinges included.
Main wing trickly to align
White spinner incl'd has 5mm hole dia,
Fair amount of adjustments required to get model built
3530 1700kv tgy motor
2200mah 20c battery, 40amp esc and 8x7 prop.
8 flights in and yes does fly like its on rails supprisingly easy to fly if flown according to the reviews above. Fast landing and keep speed up on take offNice to fly but hard to land..need to bend the landing gear forward with 4240 size motor, prop 10X7e esc 30 amp..can i go faster than 70-80 km/h???Superbe finition, le moteur est un peu difficile a instal, vis de l'intrieur et la fixation de l'hlice +cone est pour un axe de 5mmhttp://www.youtube.com/watch?v=nhnUZpMAsdEI just uploaded a video. Awesome plane and quite easy to fly.Did a maiden on mine today feb2010 flew very well like the full scale plane. Wing stalls in a tight bank. But flown like a scale plane perfect..We pushed her hard to see where the limits are and had the elevator controll horn link come off. Destroying the plane and a Li-Po fire..Will get another one. its on the tube.Not a lot of luck with bird.
Setup with 300W, 220MA 3S,10x5 prop (1050gms)
Not worries with power on take off - back stick needed as it is a tail dragger.
However, handled like dog in the air, way to tail heavy with th 50-55mm factory CG settings.
Went into the ground on maiden and totalled.
Suggest maybe 30mm to be safe!
Hi hier heizer, passt in den Akkuschacht auch mein 4S 3000 Turnigy rein?GrussOk. Here is great setup to this plane. Easy take offs and no problems with the CG. On landing you need space and enough speed as said before.
Turnigy 42-40A with TGS Sport 10x6E
Turnigy Plush 60amp Speed Controll or 40amp.
Turnigy 1800mah 4s 20C lipo.
Weight is about 1200g. And with this setup you get 500W power.I have Turnigy 42-40A with a TGS Sport 10x6E and Turnigy Plush 60amp Speed Controll and Turnigy 2200 mAh 3s Lipo. With that motor 3s is ok, but 4s is better. Gona use 1800mah 4s next week. Weight is same as 3s 2200.