Register

Product Finder

Settings

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Register

Mini F-35 KT Fighter Jet Kit w/ Motor & ESC

Mini F-35 KT Fighter Jet Kit w/ Motor & ESC

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
Weight:
359 g
SKU:
Mini-F35
Product
Description
Zoom through the hallway and practice fly-by's in the kitchen because this lightweight KTT Board (Depron) is small and slow enough to fly indoors!
The ultra small Mini F-35 Jet comes as a kit and will take you 1 evening to complete. Micro motor and ESC already included. Just include your own Rx and 2.5g servos.

Specifications:
Length : 500mm (19.7in)
Wing Span: 350mm (13.8in)
Flying Weight: 70~82g (with battery) 
Motor: C10 3750kv Brushless outrunner
ESC: 7Amp 
Prop: GWS EP4025
Servo: 2x2.5g (NOT INCLUDED) 
 

Required:
Your own TX & RX
100~200mah 1~2S 20C Lipo 
2 x 2.5g servo
 
 
 
Product
Specifications

Additional Information

  • SKU:
    Mini-F35
  • Brand:
    N/A
  • Capacity (mAh)
    No
  • Shipping Weight(g)
    359.00
  • Length:
    510.00
  • Width:
    0.00
  • Height
    0.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I have flown this jet about 10 times using a 350 ma battery. This is a powerfull real jet that is great for flying outside in low wind conditions. I took it to the gym the other night & crashed it several times before I accepted that it is to fast for a small gym. The Depron is brittle, but the jet is a great value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
leggero e difficile da governare in presenza di vento.senza vento anche divertente, poi, anche se lo rompi .. un po di ciano e via
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Actually, the more I fly this, the more fun it is. Once you have balanced out the tendency to turn right, it great to fly inverted, and in fact as it is less stable inverted, it means it is easier to turn and fly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Foam is brittle (think: wafer biscuit) & pieces do not fit that well. Motor mount poor, and screws useless (replace with hex bolts/glue).

BUT once together it is floaty, needing hardly any throttle to waft around. Torque is overwhelming though - only wanted to go straight or right - a bit of "rudder" tape on left stab helps, but now throttle=right, no-throttle=left! But despite all that, for the price, surprisingly fun!

Tip: needs max throws!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nonostatnte l'imballaggio extra il modellino arrivato rotto in pi punti e completamente imbarcato. Spero di riuscire a farlo volare.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not very good. The kit come broken. The motor isn't vvery good also.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mine really doesn't fly well. The 360mah pack isn't too heavy, and there is enough thrust. I have tried different CG locations, but no luck. It loses a lot of height in turns, and I'm almost always giving up elevator just to keep it in the air. The build was quick and easy. Don't crash it, the foam has a skin that is very brittle and not 'bendy' like depron.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
packing was average, the plane went together ok but on first flight full thrust on take off it went nose first into the ground (have a bit of up trim)

it damages very easily (depron) and this is what lowers the stars

the plane i quite fast so DO NOT TRY INDOORS
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a great plane, small and light. You need glue, screwdriver and two small hex screws for the motor mount. I used servo screws, but they are too big (the head) if you dont want to cut the mount plate.Good packing and great price. Thanks hk!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good and possibility for using for real using.



good for this price
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.