Mini OSD System w/GPS Module

• Overall
• Quality
• Value

Good but without home arrow ?

Dec 26, 2019

Gps shows ciirdinates but Seems that there is no homing arrow. Had to send it back.

• Overall
• Quality
• Value

Seems good but lacks explanations...

Dec 08, 2019

Unclear how to use it. People seem to appeciate but it lacks explanations.

• Overall
• Quality
• Value

Works Just fine

Aug 26, 2019

This set works fine. The refresh is a bit slow. About 2 seconds latency. Sometimes the speed flashes tot over 450kmh. More people have this. Buy for about 20 dollars it works fine.

• Overall
• Quality
• Value

Customer Rated

Sep 17, 2016

The GPS is not working! Wrong coordinates. The speed is bouncing randomly. Overal waste of time and money. Very dissapointed. The only thing that works well is the voltage monitor.

• Overall
• Quality
• Value

Customer Rated

Aug 10, 2016

I really like how easy the setup was. Also if you were thinking about upgrading the firmware and GPS, it defiantly can. Its a great cheap product, I strongly recommend this to any FPV flyer.

• Overall
• Quality
• Value

Customer Rated

Jul 10, 2016

Not the greatest OSD, I can barely see the OSD information on my screen and this is after HK sent me a new one as the original did the same thing, very faint print on the screen. I sent a video on my setup to HK Product specialist and they came to the conclusion that the product was faulty. So what is the chance of two of these in a row being faulty, maybe this is just the quality of the product, overall not worth the money or time to set it up.

• Overall
• Quality
• Value

Customer Rated

Jan 23, 2016

I can not use because the most important lacks.
The OSD has no arrow indicating the Home Point.
I have to buy another one because I can not use it in my Bixler for Long Distance ....

• Overall
• Quality
• Value

Customer Rated

Jan 02, 2016

Worked fine for the price... the location of the speed/altitude could be a bit better/logical (alttide up right and speed down right) but worked.. can monitor 2 batteries, have a timeclock, GPS coordenates , speed and altitude, a clock and even RSSI reading..
refresh is slow but for the price it cant be beaten...

however... in mine i got quite "interesting" speed readings:

https://www.youtube.com/watch?v=pNDUj-R2ZWQ

Also i flashed this to U-OSD .. looking forward to use as such

• Overall
• Quality
• Value

Certified Buyer Rated

Nov 06, 2015

Good product not much else to say.,.

• Overall
• Quality
• Value

Customer Rated

Sep 28, 2015

unfortunately no qualitycontrol. HK exists 10y now and you ought to think they improve.
The word "defective" does not exist in the chinese language. everything must leave the country working or not. you trouble with the item, send it back or not?
received this OSD set for the 3rd time. this time after hooking up the system to my fpv, no osd screen. the programming by a USBarp is available and that's weird. so looked further in the "hardware" resoldered all the components did not had any effect. deeper troubleshooting threw it's fruits because by testing the 78L05 regulator I finally got to the problem.there is input voltage but no output. I desoldered the regulator and soldered 2 cables to the output pins on the board. with 5V separate input from my lab power supply I had osd screen.BAD 78L05 You can see in the picture how I solved the problem by placing a male connector glued next to the 1st battery connector and rated this as a 5V port. I just borrow the 5V from the GPS connector. put many hours to this but am glad I did. please hobbyking: begin with quality control on your stuff. we made you rich in this 10 years. please make a little less profit out of your millions of dollars and help us all out.