Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Turnigy Mini Power Distributor UBEC (Black)

Generating Links

Turnigy Mini Power Distributor UBEC (Black)

Price:

Now save save $0.00 $0.00

$78.56
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
373000009-0
want FREE shipping? Click here to find out more!

Min Power Distributor Ubec suited to 30cc plus gas powered models.

This unit has great features, which include: Dual battery input, 5v isolated linear RX BEC, 20 Amp voltage adjustable Ubec on all output channels, 8 channel RX input with dual outputs on each channel - simplifying dual servo control surfaces.

Great inclusions are the independent 5V linear regulator providing a separate power source for the receiver, optically isolated CDI power & in built remote ignition kill. Receiver, Servo & CDI power sources are completely isolated from each other.

This is the first Power Distributor system to securely nest the receiver within the power distribution 'block' thereby shortening cable runs, adding protection to your all important receiver & speeding set up time.

Features:
• 5v Linear RX BEC
• 20 Amp Servo UBEC
• Users adjustable UBEC voltage
• 8 (+1 CDI cut) input channels
• 16 output channels
• 5 Status check LEDs
• Padded receiver tray & Secure mounting
• CDI isolated power
• CDI remote ignition control (remote cut)
• CDI power status indicator light
• CDI power output terminal
• CDI voltage monitor LED

Optional: Input/output voltage display with external power switch

Spec:
Input Channels: 8 (+1 CDI Cut)
Output Channels: 16
Input voltage: 6V-13V
Servo UBEC Current: 20A (30Amp Burst)
Output voltage: 4.8-9.7V (user adjustable; Default is 5.2V)
RX power: 5v linear bec
Working temperature: -20 to 85 degrees c
Weight: 80g
Dimensions: 116mm x 88mm x 13mm

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

J.A. | Verified Buyer

  • Overall
  • Quality
  • Value

Good, but be careful

Dec 21, 2018

A very nice device. But it involves a potential danger: the 5V power supply to the receiver has only 1A. This is just enough for the receiver and the internal ignition switch. But it is not enough for powering any other device from the receiver. I tried it: already with 1 servo the voltage-drop causes the receiver to stop working. So: DO NOT CONNECT ANY EXTRA DEVICE (Servo, ESC, SBUS Decoder etc.) TO THE RECEIVER!!
But there is a “workaround” if you want to connect additional devices: use the 20A power supply and to achieve that you have to do the following:
- disconnect both (!) red wires from the servo-connectors ;
- take a short female-female Futaba-lead and remove the black (ground) and white (signal) wires completely;
- take, on 1 side, also the red pin out of the connector and put this pin into the middle (!) position of one of the servo connectors;
- put the other side of the servo-lead into one of the (double) servo slots.
I did not cut away the two loose red wires but did put a shrink wrap over the pins. By doing that it is possible to bring the power supply back to its original state eventually.

Douglas | Verified Buyer

  • Overall
  • Quality
  • Value

Almost the same as the yellow one.

Oct 17, 2017

The only difference I can see between this one and the yellow one is that this has 20A bec and the yellow has 30A bec. Then why is this more expensive?? I don't know, maybe cuz black is "cooler"..?? Works great for me, dual battery supply, adjustable bec voltage, I set mine to 6v. Easy to set with a simple voltage meter. It would be nice if it had led V display, but that would add more $ and not really neccessary, imho. I will get another for my next 30cc bird, maybe the yellow one, but I don't really need 30A bec!

Jorge | Verified Buyer

  • Overall
  • Quality
  • Value

Question

Jan 21, 2017

Excuse my ignorance Which batteries do you recommend for use with 8 standard servos?
Thanks :)

michael | Verified Buyer

  • Overall
  • Quality
  • Value

NO MORE POWER PROBLEMS EVER AGIN!!!!!

Dec 15, 2016

i have this ajustable power distributer in all my planes its the CATS MEE-OUH !!! TWINN BATTERY ADJUSTABLE POWER THERE OUT THERE FOR A HECK OF ALOT MORE$$$$$$ LIKE TWICE THIS PRICE. GET ONE AND YOU WILL NEVER HAVE A POWER PROBLEM AGIN !!!! FROM THE AVIATER UNCLE MIKE IN MENDOCINO CALIF

Patrick.Jurek@al | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Nov 13, 2015

Gute Akkuweiche Funktioniert super fr ganz kleines Geld.

Benutze Sie in einer 2,70m Extra mit 10 Servos auf 8,4 Volt

DrifterTR | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 26, 2015

It is the best product for power distribution. Going to use on 1/4 piper cub

Customer files
Altimètre.pdf Download [558]
german manual Download [13]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!