New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Mini Skywalker 840mm ARF

Mini Skywalker 840mm ARF

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$29.25
Status:
In Stock
SKU:
304000003
WANT FREE SHIPPING? Click here to find out more!

The force is strong with this one......so is the EPO foam it's made from and the carbon spar in the wing. Being in kit form, this little parkflyer allows you to use your preferred power train and RC equipment, it is a very simple build and the completed model is sure to give hours of parkflying fun....If you are into micro FPV - in a place, far, far away..........

Specs:
Wingspan: 840mm
Length: 590mm
Flying Weight: 250g

Includes:
Decals
Hardware

Requires:
Your Own 4 Channel TX/RX
4 x Sub-Micro Servo
18mm 1700kv Motor
12A ESC w/BEC
850mAh 3s Lipoly Battery
5x3 Prop
Foam-safe glue

  • SKU 304000003
  • Brand Other
  • Shipping Weight 583.0000
  • Length 875.00
  • Width 120.00
  • Height 145.00
  • IC/2:Elec -
  • Motorsize(diam-or-cc) -
  • Wingspan(mm) 840.00
  • Length(mm) -
  • SaleWeight(g) -
  • Capacity (mAh) -
  • Two planes one pilot
  • Two planes one pilot 1st Attempt
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I bought this kit to my sun, after we install Motor and servo it was impossible to get the CG for the air plane it is very heavy to the rear side with my 15 years of experience in this field.
result it is impossible to fly with it except if you have 10 years of experience so this is not for beginner and better to paid 20 USD more to buy ready to fly aircraft

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

I bought this kit to my sun, after we install Motor and servo it was impossible to get the CG for the air plane it is very heavy to the rear side with my 15 years of experience in this field.
result it is impossible to fly with it except if you have 10 years of experience so this is not for beginner and better to paid 20 USD more to buy ready to fly aircraft

Ok

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Ok

I set my 1st one of these up as a 3 chanel, aileron, elevator and throttle. with a cheap Chinese 2200kv motor using a 3 blade drone propeller and a turnigy 2200mAh 3s battery to get it to balance. This plane climbs vertically at a rate that I have to be careful not to rip the wings off, even on a windy day it flys and glides well. I have given it plenty of punishment but with some hot glue & duct tape it keeps flying. I am glad I bought 4, after learning to fly on the 1st one the next will still be tons of fun and last longer

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

I set my 1st one of these up as a 3 chanel, aileron, elevator and throttle. with a cheap Chinese 2200kv motor using a 3 blade drone propeller and a turnigy 2200mAh 3s battery to get it to balance. This plane climbs vertically at a rate that I have to be careful not to rip the wings off, even on a windy day it flys and glides well. I have given it plenty of punishment but with some hot glue & duct tape it keeps flying. I am glad I bought 4, after learning to fly on the 1st one the next will still be tons of fun and last longer

Fantastic little plane. Easy to build, put the servos in wings, didn't worry about the rudder servo as its not really needed. Using DYS 1806 2300kv motor with 5030 3-blade prop and either 2200, 1200 3s. Flies very well with this setup.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Fantastic little plane. Easy to build, put the servos in wings, didn't worry about the rudder servo as its not really needed. Using DYS 1806 2300kv motor with 5030 3-blade prop and either 2200, 1200 3s. Flies very well with this setup.

Great little EPO airplane... It comes more as a kit than ARF, but the quality of the components and of the hardware is awesome for such a price ! Building is straightforward.
The only little cons is that it could be difficult to obtain the CG as the tail needs some renforcement and the motor mount is a bit too much backward (but not a problem if you use FPV equipment in the front)
In flight, the controls are very responding, and it' s very predictable. Lot of fun !

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Great little EPO airplane... It comes more as a kit than ARF, but the quality of the components and of the hardware is awesome for such a price ! Building is straightforward.
The only little cons is that it could be difficult to obtain the CG as the tail needs some renforcement and the motor mount is a bit too much backward (but not a problem if you use FPV equipment in the front)
In flight, the controls are very responding, and it' s very predictable. Lot of fun !

Mini Skywalker is a great little plane easy to build and so much fun to fly

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Mini Skywalker is a great little plane easy to build and so much fun to fly

Mini Skywalker is a great little plane easy to build and so much fun to fly

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Mini Skywalker is a great little plane easy to build and so much fun to fly

Mini Skywalker is a great little plane easy to build and so much fun to fly

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Mini Skywalker is a great little plane easy to build and so much fun to fly

Awesome little plane. Like another reviewer states it's more like a kit rather than ARF. It took me around 3-4 hours to build. I fly mine as a glider/sailplane and it's a lot of fun. My setup weighs in a 9.5 oz (272 grams) but I can fly with a min of ~8-10 knots of wind on a big cliff.

The decals came with red, yellow and black (instead of the blue in the image). I kind of wanted the super-gay rainbow like the pic but not a big deal.

I'm pleasantly surprised by this little plane. I didn't have any expectations for the plane so I'm quite impressed. For the price you really can't beat it.

playlist_add_check Overall:
trending_up Value:
verified_user Quality:

Awesome little plane. Like another reviewer states it's more like a kit rather than ARF. It took me around 3-4 hours to build. I fly mine as a glider/sailplane and it's a lot of fun. My setup weighs in a 9.5 oz (272 grams) but I can fly with a min of ~8-10 knots of wind on a big cliff.

The decals came with red, yellow and black (instead of the blue in the image). I kind of wanted the super-gay rainbow like the pic but not a big deal.

I'm pleasantly surprised by this little plane. I didn't have any expectations for the plane so I'm quite impressed. For the price you really can't beat it.

Great little airplane definitely moves across the sky and flys well!

Took about a week in a half to show up at m y doorstep plane came with minor dents that are easily repairable.

Im not using this as an FPV plat forum just more as a fun flyer.

verified_user Quality:
playlist_add_check Overall:
trending_up Value:

Great little airplane definitely moves across the sky and flys well!

Took about a week in a half to show up at m y doorstep plane came with minor dents that are easily repairable.

Im not using this as an FPV plat forum just more as a fun flyer.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
Customer files
Manual - Mini Skywalker 840mm Download [5045]
Maiden Download [3124]
No File Name Download [530]
FPV install Download [1715]
FPV install 2 Download [1818]
No File Name Download [453]
No File Name Download [481]
No File Name Download [481]
mySkyW Download [297]
mySkyW2 Download [187]
  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags