Become a Supplier Blog New Items
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

MKS DS1210 Titanium Gear Servo (0.12 sec/10kg-cm)

Generating Links

MKS DS1210 Titanium Gear Servo (0.12 sec/10kg-cm)

Price:

Now save save $0.00 $0.00

$23.70
Already Purchased Discontinued Product

Please continue searching for a similar product.
SKU:
DS1210
want FREE shipping? Click here to find out more!

Featuring a Titanium Gear train and water/dust proof sealed case the MKS DS1210 can be dropped in water, caked in mud or buried in sand and still come back for more! Perfect for trucks and buggies. MKS servos are well respected in Taiwan, Korea and Japan.

Specs:
Dead band: 0.002ms (Default)
Control System: +Pulse Width Control
Working frequence: 120Hz
(RX) Required Pulse: 3.0~5.0 Volt Peak to Peak Square Wave
Operating Voltage: 4.8~6.0 V DC Volts
Operating Temperature Range: -10 to + 60 Degree C
Operating Speed (4.8V): 0.15 sec/60° degrees at no load
Operating Speed (6V): 0.12 sec/60° dagrees at no load
Stall Torque (4.8V): 8.05 kg-cm (292.4 oz/in)
Stall Torque (6V): 10 kg-cm (365.3 oz/in)360°
Modifiable: NO
Motor Type: DC Motor
Potentiometer Drive: Direct Drive
Driver Type: FET
Bearing Type: Dual Ball Bearings
Gear Type: Metal Gear
Programmable: NO
Connector Wire Length: 15.0 cm (5.9 in)
Dimensions: 40X20X40.30 mm (1.5748X0.7874X1.58 in)
Weight: 56 g (1.97 oz)

Upload video

Only registered users can upload video. Please, log in or register

Topics
Sort by
Most Recent Topics
* Nickname:

* Your Reply:


Please, enter the text shown in the image into the field below
*Verification Code:
Cancel
Submit
Post a new Topic
* Nickname:

* Your Topic:



Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

jaubertel | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 18, 2012

Very very good servo on T-Rex 600 or HK600 for cyclic. good torque, good speed, centering very well, and legendary MKS quality for a mini price!

JoachimJ | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 28, 2011

Bought one just to try when it first arrived. Put it in a Traxxas Slash 4x4, and it was a very noticeable upgrade compared to the stock servo. Have run it in pretty harsh conditions, and it seems to take the punishment well. Five stars all round. I just wish it would come in stock again so I could buy more of them.

Guga | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

May 06, 2011

At first I installed this servo in my Inferno 1/8 buggy steering and it worked great, now I am using it in a Associated B4.1, almost way too much torque and speed. Very recommended.

wrong17 | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

May 05, 2011

This servo works great! I am using it as my steering servo for my Losi LST 2. Since the splines on this servo is the same as a futaba I had not problems with the stock servo saver. The only comment have is that the stall torque is listed incorrectly on this site. I am pretty sure @6v it is 138.87oz/in and NOT 365.3oz/in. You should check yourself to make sure.

Customer | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 18, 2011

Servo muy rapido, montado en mugen mbx6 dos meses sin problemas. Envio en 3 semanas por air mail normal (envio barato)

Customer | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 15, 2011

Installed one in my Inferno 7.5 buggy and it is really good! Fast, strong and cheap. I recommend for any 1/8 buggy.

Customer | Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 03, 2011

I'm using these servos on my HK600GT... All i can say is wow. I am impressed they are super fast, super strong and very percise. I will use these on any Heli that I build that can take this size servo.Other servos that have faster specs aren't always fast when there is a load on it. these are so strong the load has no effect on the speed. SUPER SERVO.

I enjoy flying my HK600 better then my real trex helis cause of these.

quesnes | Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 26, 2011

Put 3 of these in a T600 Esp. Need to mod a little bit because they are to long. Nothing hard to do. This servo looks very good, it's strong, quick and not too noisy. They will be perfect for my T600 FBL

| Verified Buyer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 19, 2011

Good vervo on HK600GT cyclic. good torque, good speed, centering well. One of theim makes noise sometimes but no issue so far.

| Verified Buyer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 11, 2011

I use this servos from month in my nitro heli - Elyq vision 50 Ultimate on swashplate and they work great. Servos are fast and strong. Execution is in the highest level. Extra advantage is waterproof. Watch this video http://www.youtube.com/watch?v=Wo0ucXOzWJI&feature=player_embedded
I chose those servos because this is best choice for someone who wants best product for lower price. I recomend it for nitro and electric 600 and 700 size heli.
Best Regards
David from Poland

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!