Looking for the ultimate power system for your next Multi-rotor project? Look no further!
The Turnigy Multistar outrunners are designed with one thing in mind - maximizing Multi-rotor performance! They feature high-end 45SH magnets, high quality NMB bearings, 14 Poles, custom motor mount and all are precision balanced for smooth running, these motors are engineered specifically for multi-rotor use.
The 2213 integrates the prop adapter into the motor housing for problem free prop attachment and centering. Both slot (DJI style) and standard props can be utilized, so no more damaging your prop from overnighting trying to secure your two piece prop adapters to the shaft. The 2213 has a built in aluminum mount for quick and easy installation on your multi-rotor frame. This Multi-Star kit comes with two 1045 props one CCW and one CW and is ideal for a 3 cell set-up for a 450 size Quad, 550 Hex or 700 Octo. And for those running a 4 cell set up can use 8045 size prop for an ultra-fast response.
These Multistar outrunners have been specifically designed from the ground up for multi-rotor use and are not based on aeroplane motors.
Lipo cells: 2-4s
Max Surge Watts(W): 200
Max.current(10s): 15 amps
No Load Current: 0.4 amps
Intemal Resistance: 0.180 ohm
Number of Poles: 14
Dimensions(Dia.xL): 28 x 26 mm (not counting the prop shaft)
Motor Shaft: 3mm (not the prop shaft)
prop shaft: Slotted (DJI) style 8mm round (7mm flat to flat) stepped down to 6mm and a M6 prop nut
Prop: 10x4.5(3S) 8 x 4.5 (4S)
bolt hole spacing: 16mm * 19mm
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
Super Shop für den Modellbauer.
65 Bestellungen in dreieinhalb Jahren, davon etwa 30 über EU-Warenhaus. Nicht ein einziges abwicklungstechnisches Problem.
Super Live Support.
These are rubbish! DONT GET THESE!!! The bearings on them are awful, my quadcopter does not fly because of these, AVOID!A great price for a surprisingly good motor, well balanced with tight windings and soft cable with bullet connectors pre soldered. Props look cheap so i wont be using on my current build.Excellent motor. I bought 4 pc for my multirotor, and all fine. The props need a little balancing.
I use with HK X580 frame, 30A HK BlueSeries ESC, Zippy Compact 3S 2200mAh 25C.7 star good and low costUsed these on my Maxi quadlugs tricopter. Works well with 20a esc and 2200mah 3 cell get 7 minutes flight timeGreat, too bad the motor cables are a bit short, nut other than that - good!Motor ideal para montar en un cuadricoptero tipo 450. Yo los tengo montados en el Quanum Venture y la verdad es que estoy encantado. Uso unas palas 1045 y pese a que hacen un poco de ruido, el aparato se mantiene muy estable en el aire. Con esa pontencia levanta bastante peso. Recomendados!These motors are great! I have bought a total of 30 of these motors for numerous multirotor builds and they are extremely durable, they have been in crashes from 100m high onto concrete and come out with just a few scratches. They have a super strong prop shaft and put up with a 10 inch prop on 4s no problem. Highly recommend these great motors!Have count less hours of flight on these motors and seem as strong as the day I got them. The original propellers I only used for about a week before I got CF ones but they seemed OK to me.