Looking for the ultimate power system for your next Multi-rotor project? Look no further!
The Turnigy Multistar outrunners are designed with one thing in mind - maximizing Multi-rotor performance! They feature high-end 42SH magnets, high quality bearings, High Pole counts for less noise, smooth responsive power and increased efficiency. They have custom motor mounting and all are precision balanced for smooth running. These motors are engineered specifically for multi-rotor use and are not based on airplane motors.
The 2209-1200KV MultiStar is almost too nice to fly! The workmanship and detail in this motor is at a whole new level. It’s fitted with shimmed and pre-loaded quality bearings and high grade silicon wires. It comes with three prop mounting options; A direct bolt T-style @ 12mm hole to hole spacing and 15mm hole to hole spacing for the Blade 350QX props, as well as a 3.17mm shaft for collet hub style propellers. The lower mounting plate has 14mm hole spacing and alignment pin holes with matching bullet connectors for a direct drop in replacement for the Blade 350QX Quadcopter. The 2209 is approximately a 100kv more than the stock 350QX motor at 1200kv, Perfect for aerobatics and punch out power or for the heaver camera gimbal equipped ones needing a little more power.
The new Multistar 2209 with its multiple propeller mounting options, increased performance and direct bolt in form factor makes this the perfect upgrade to the Blade 350QX or any other 350 class multirotor.
Multistar is simplifying the world of Multi-Rotors with their purpose built product line and taking the guess work out of your setup.
Lipo cells: 3s
Max Amps: 20A
Number of Poles: 12P14S (12poles 14 stators)
Dimensions(Dia.xL): 21 x 27.8mm
Motor Shaft: 3.17mm
Propeller attachment: 12mm hole to hole for T-style, 15mm hole to hole for Horizon props and 3.17mm shaft for collet props.
Lower mounting hole spacing: 14 x 14mm (and Blade 350QX aliment pin holes)
4 x 2209 1200Kv MultiStar motor
4 x Direct mount T-Style prop washer with 4mm centering hub
Propeller mounting Hardware
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
great bang for your buck works wellI'm using this motors for years and I have no issues about it.
It is really a good motor with such prizemotores de muy buena calidad, muy pocas vibraciones y ruido.Have bought 2 sets of that for 2pcs homemade quadcopters 350 size. After several attemp with setting FY-DOS and props, it can fly safe for 32 minutes. If there is no crash, motor are very quied.I order 2 st,one for me one for friend,2 of them has problem wizh ball bearing,also i contact support-They told it fits for walkera350 ..but it does not fitt
Wery bad bearing quality2 of the 4 motor bells were very loose upon receipt. Only 10 flights in and the lower bearing has failed on one of them; causing my quadcopter to crash from 100ft up. Won't be buying another set of 4 to replace one defective motor; especially as another looks like it'll do the same in time. Attempted to replace the bearing but, unlike every other motor I've owned, these are impossible to remove without damaging the bell.I received the motors and they appear to be in great shape. Since the wires are not color coded, how do they connect to the Red, Blue, & Black leads?u get 4 motors for the price of 1 original blade motorWell made, but bearings not so big as needed. You need to get speare bearings. Removing old bearing is not so easy rask especialy when inner pare is fall frou outer. The price is higher then I wish.I bought two sets of these for a custom hex copter I made and they work great! plenty of power and they are really quiet!