New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Multistar Elite 2216 920KV Multirotor Motor Set (2xCW 2xCCW)

Multistar Elite 2216 920KV Multirotor Motor Set (2xCW 2xCCW)

Discontinued Product

Please continue searching for a similar product.
SKU:
9536000009-0
WANT FREE SHIPPING? Click here to find out more!

The Turnigy Multistar Elite Outrunners are designed with one thing in mind - maximizing Multi-rotor performance! The new

Multistar Elite motors are the new standard in Multirotor performance. Each Elite motor is built for a specific type/application allowing for further refinement and efficacy/power to be optimized.

Multistar Elite motors are more than a fancy name and new dark green color. They are built using the highest quality components, inc. EZO Japan bearings, N45SH Magnets, 0.2mm laminations, 180deg oxygen free copper wire, 0.005g balancing, perfect wind laid down, with 100% QC. In the design stage each motor is evaluated for their type application; everything from their mounting, to the prop type adapters are taken into consideration. The Elite motors are truly works of art

The 2216 920kv is a very unique motor design, having a 4mm main shaft that goes all the way thru the motor to include the prop adapter threads vs the standard 3mm shaft used by others in this class.
The 4mm steel shaft is supported by massive 11mm EZO Japan bearings almost double the size from standard 22xx  motor options. This makes this the strongest and most durable motor in its class.

If you’re building a 400~600 class multirotor or looking to upgrade your RTF this motor is a must have.

Multistar Elite is unmatched in quality and value, and the performance speaks for its self.

Features:
• 16mm EZO Japan Bearings
• Solid steel 4mm main thru shaft  (no Aluminum threads)
• Massive 11mm EZO Japan Bearings
• N45SH Magnets
• .2mm Laminations
• 180deg oxygen free Copper wire
• .005g Or better balancing
• Perfect laydown windings
• 100% QC
• Built in folding prop adapter
• Single wire wound

Specs:
KV(RPM/V): 920KV
Lipo cells:  3S
Max current: 255W
Max Amps: 18A
No Load Current: 0.55A/10V
Number of Poles:  12/14
Motor Shaft:  4mm
prop shaft: CW/CCW 8mm/6mm threads quick release style
Weight: 58g
bolt hole spacing: 16mm*19mm
Lamination thickness: 0.2 mm
Magnets: N45 SH
Bearing: EZO Japan
Balancing spec: 0.005g

Included:
2 x CW 2216 920kv motors
2 x CCW 2216 920kv motors
 

  • SKU 9536000009-0
  • Brand MultiStar
  • Shipping Weight 260.0000
  • Packaging Length 100.00
  • Packaging Width 45.00
  • Packaging Height 100.00
  • Kv(rpm/v) 920.00
  • Max Current (A) 18.00
  • Resistance (mh) 0.00
  • Max Voltage(V) 15.00
  • Power (W) 230.00
  • Shaft A(mm) 8.00
  • Length B (mm) 31.00
  • Diameter C(mm) 28.00
  • Can Length D(mm) 19.00
  • Total Length E(mm) 46.00
  • Very good flight time
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

motores de mucho torque y buena calidad

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

motores de mucho torque y buena calidad

Order came with 3 x CCW Prop Nuts and 1 x CW so I had to send whole lot back for replacement as Hobbyking don't supply Nuts seperately!
Messed up my weekend flying new model and wasted a lot of time as a result.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Order came with 3 x CCW Prop Nuts and 1 x CW so I had to send whole lot back for replacement as Hobbyking don't supply Nuts seperately!
Messed up my weekend flying new model and wasted a lot of time as a result.

These things are labelled backwards. If you pair a motor labelled CW with a self tightening CW propeller, you have a self loosening propeller. Had to swap all motors around, CCW are now CW and vice versa. I have also found it very hard to get bigger props for these motors because of the DJI fit. Eventually went to folding props to get over 11".

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These things are labelled backwards. If you pair a motor labelled CW with a self tightening CW propeller, you have a self loosening propeller. Had to swap all motors around, CCW are now CW and vice versa. I have also found it very hard to get bigger props for these motors because of the DJI fit. Eventually went to folding props to get over 11".

These motors work fantastic. They came perfectly balanced with excellent finish. I installed them on an AQ550 KongCopter in X4 setup with a camera gimbal. I run them on a 4S, 5000mAh LiPo with a total weight of about 2600Kg. The quad lifts at about 40pcnt throttle with plenty of extra thrust from the 9x4.7 DJI style props. I'm using the Afro 30Amp ESCs. I get about 11 minutes of flight time fully loaded and the motors land with a temperature of between 110 to 120F which is very common. I would definitively buy these again.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These motors work fantastic. They came perfectly balanced with excellent finish. I installed them on an AQ550 KongCopter in X4 setup with a camera gimbal. I run them on a 4S, 5000mAh LiPo with a total weight of about 2600Kg. The quad lifts at about 40pcnt throttle with plenty of extra thrust from the 9x4.7 DJI style props. I'm using the Afro 30Amp ESCs. I get about 11 minutes of flight time fully loaded and the motors land with a temperature of between 110 to 120F which is very common. I would definitively buy these again.

These things are labelled backwards. If you pair a motor labelled CW with a self tightening CW propeller, you have a self loosening propeller. I had to swap my motors after installation because of this. Also, the screw mounts are made of butter, don't over tighten or you will easily strip them. Also, my set of 4 motors came with 3 CW acorns and 1 CCW acorn. The only redeeming quality is that they seem to work pretty good once installed correctly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These things are labelled backwards. If you pair a motor labelled CW with a self tightening CW propeller, you have a self loosening propeller. I had to swap my motors after installation because of this. Also, the screw mounts are made of butter, don't over tighten or you will easily strip them. Also, my set of 4 motors came with 3 CW acorns and 1 CCW acorn. The only redeeming quality is that they seem to work pretty good once installed correctly.

these motors are awesome. bought before and they're good. if you receive them with dry bearing lube them up and keep spinning them by hand for few minutes. it'll become as smooth as the others

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

these motors are awesome. bought before and they're good. if you receive them with dry bearing lube them up and keep spinning them by hand for few minutes. it'll become as smooth as the others

funcionan muy bien, muy poca vibracion casi imperceptible, eje solo compatible con helices estilo DJI

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

funcionan muy bien, muy poca vibracion casi imperceptible, eje solo compatible con helices estilo DJI

these motors run great the only problem with these is the 8mm shaft, have to drill out most blades to fit

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

these motors run great the only problem with these is the 8mm shaft, have to drill out most blades to fit

I just bought a set of these and tried them on a Phantom 2. They have more vibration than the stock motors especially the two clock wise spinning motors. The two counter clockwise motors seems really smooth. I see the vibration in the gopro video. I can feel the vibration by just spinning up the motors with no props on and just lightly touching my finger to the sides of the motors while they are spinning. The CCW motors feel super smooth and the CW motors feel rough. I did get 23 minutes flight time with a new 5200 Mah battery, No gimbal or camera attached.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just bought a set of these and tried them on a Phantom 2. They have more vibration than the stock motors especially the two clock wise spinning motors. The two counter clockwise motors seems really smooth. I see the vibration in the gopro video. I can feel the vibration by just spinning up the motors with no props on and just lightly touching my finger to the sides of the motors while they are spinning. The CCW motors feel super smooth and the CW motors feel rough. I did get 23 minutes flight time with a new 5200 Mah battery, No gimbal or camera attached.

these motors are the crme of the crop,installed 6 on my hk 650x hex,really nice sounding and powerful too, seems well balanced too,spend the couple extra bucks and get real quality motors, these motors have around 35 more watts than same size other motors in this class and kv rating,glad I opted for the better motors,oh my hex flies awesome,first build,goodbye phantom 2 hk all the way 5 stars all the way thnx again HK u make rc afforadable

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

these motors are the crme of the crop,installed 6 on my hk 650x hex,really nice sounding and powerful too, seems well balanced too,spend the couple extra bucks and get real quality motors, these motors have around 35 more watts than same size other motors in this class and kv rating,glad I opted for the better motors,oh my hex flies awesome,first build,goodbye phantom 2 hk all the way 5 stars all the way thnx again HK u make rc afforadable

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!