The Turnigy Multistar Elite Outrunners are designed with one thing in mind - maximizing Multi-rotor performance! The new Multistar Elite motors are the new standard in Multirotor performance. Each Elite motor is built for a specific type/application allowing for further refinement and efficacy/power to be optimized.
Multistar Elite motors are more than a fancy name and new dark green color.. Built using the highest quality components from EZO Japan bearings, n45sh Magnets, .2mm laminations, 180deg oxygen free copper wire, .005g balancing, Perfect wind laid down and 100% QC, and then the design of each motor are also evaluated for their type application and everything from their mounting, to the prop type adapters are taken into consideration. The Elite motors are truly works of art
The Elite 4006 740KV Has been optimized for 3~4s operation and a 10~15inch propeller. The Motor comes with removable/replaceable knurled prop shaft and direct bolt style propeller mounting options. The 4006 provides ample torque for fast response providing a more stable platform in fast flight and windy conditions.
Multistar Elite is unmatched in quality and value, and the performance speaks for its self.
• EZO Japan Bearings
• N45SH Magnets
• .2mm Laminations
• 180deg oxygen free Copper wire
• .005g Or better balancing
• Perfect laydown windings
• 100% QC
• Replaceable prop adapter and direct bolt prop supported
Lipo cells: 3-4 s
Max Amps: 27A
No Load Current: 0.5A/10V
Internal Resistance: 0.136 ohm
Number of Poles: 18/24
Dimensions(Dia.xL): 40×6 mm
Motor Shaft: 4mm
Prop shaft: 5mm
Bolt hole spacing: 19*25mm
Lamination thickness: 0.2mm
Magnets: N45 SH
Bearing : EZO
Balancing spec: 0.005g
Propeller data chart available under the pictures
Unit Weight (g)
Max Currents (A):
Length B (mm):
Can Length D(mm)
Total Length E(mm):
Great build quality! And the lifting power!
using it on my 2kg photo/video quad, and its got no problem. paired it with the DJI Naza M Lite, and its just perfect!
100% ReccomendedThis product was purchased for building the new drones.
This product has the thrust of what is possible is roughly calculated.
The weight of the new drone is there is a calculation of about 2kg, there is sufficient force by motor I hope satisfied.top produkt great qualityI just tried mine with a 15X5 prop, it melted the motor in about 3 seconds. not sure I would trust anything above 13" on this motor.
i have been using mine with a 12x5 and getting good results.Just got 4 of these little beauties and running them with Afro 30a ESC.. Absolutely brilliant, very smooth flight.
I will be buying more of them for my larger models for sure.these motors are absolutely awesome, have an x8 set spider 700 quad , 4s 6200 parallel , 1255cf props, the thrust on them ..like a rocket so i am changing to 1345 props to give me a more chilled flight as now its aggressive manoeuvre and on 4.5 kg total set up weight is a bit to strong , yes total recommend these motor, had about 10 flight no bearing play ,run mega smooth without getting even a bit warm , actually like they havent even been in use, totally recommend especially for the price.Tolle Motoren! Laufen Prima mit den 30 A Multistar Reglern und dem 5200 er 4s Lipo, ebenfalls von Multistar. Sehr ausdauernd, werden auch bei lngerem Betrieb nicht hei. Absolute Kaufempfehlung.These motors could lift a truck!
Well built, with quality prop adapters that include washers to use under your lock nuts *you DO use lock nuts, right?*
The windings are extremely high quality. The frame design is large, so pay attention to those hole dimensions in the HK description. That frame allows you to lubricate your top and bottom bearings easily. *you DO lubricate your bearings, right?*Bought 6 of these for a 800mm hex which will eventually be utilized for aerial photography and videography. I was pleasantly surprised by the quality when the box was opened. Later after assembling the text chassis, power delivered was alarming even with a 4s 10000 mAh battery. These are capable of lifting some weight! Motors are very well made, bearings are smooth, wire wrappings are tidy and neat. Oh love the metallic green colour too ;-)awesome quality, cant even compare to the standard multistar line....these are rock solid so far....