The Turnigy Multistar Elite Outrunners are designed with one thing in mind - maximizing Multi-rotor performance! The new Multistar Elite motors are the new standard in Multirotor performance. Each Elite motor is built for a specific type/application allowing for further refinement and efficacy/power to be optimized.
Multistar Elite motors are more than a fancy name and new dark green color. They are built using the highest quality components, inc. EZO Japan bearings, N45SH Magnets, 0.2mm laminations, 180deg oxygen free copper wire, 0.005g balancing, perfect wind laid down, with 100% QC.
In the design stage each motor is evaluated for their type application; everything from their mounting, to the prop type adapters are taken into consideration. The Elite motors are truly works of art
The 4114 330KV is optimized for 6s batteries, with 15.5 folding props it's perfect for 800~1200mm frames and heavy lift operations. The built in prop holder and integrated cooling fan reduce mass well increasing cooling and efficiency. Huge 16mm EZO Japan bearing support the main shaft and controlled bearing preload. The 24/22pole count makes for higher efficiency at lower RPM torque for the 15.5 inch props.
Multistar Elite is unmatched in quality and value, and the performance speaks for its self.
• 16mm EZO Japan Bearings
• N45SH Magnets
• .2mm Laminations
• 180deg oxygen free Copper wire
• .005g Or better balancing
• Perfect laydown windings
• 100% QC
• Built in folding prop adapter
• 24/22 pole efficiency
Lipo cells: 3-6S
Max current: 500W
Max Amps: 22.5A
No Load Current: 0.73A/10V
Number of Poles: 24/22
Motor Shaft: 5mm
Prop shaft: N/A
Bolt hole spacing: 25*25 mm and 30mm tri
Lamination thickness: 0.2 mm
Bearing: EZO Japan
Balancing spec: 0.005g
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
I've got 6 of them now on my tarot T810.
Max magnet temp 150 Celsius.
1000 gram thrust
72 Celcius after 3 min
I have about 25 min fly time whit 1:3 wight ratio. (8S)
I'd recommend them to anyone looking to make a HVL drone or a camera drone.
I have a max payload capacity of 10kg.I have 16 of these in service now. No problems with any of them. The bigger bearings make them nearly vibration free and they are smooth through the entire power band. Running 15x5.2 folding props it will keep a T-15 frame airborne for about 15 minutes per 8000mah battery with gimbal and a Nex 5 DSLR. It's total capacity exceeds 12kgs. This run time includes powering the downlink and lights. The only improvement I would make is to drop them to 300kv. Outside of that, they are as good as I have used. I do wish the price wouldn't jump all over the place, 5 items, one order, 100 bucks in 4 days for the same parts, crazy. I don't get it and they can't explain it. Go figure. Unfortunately, this is the only place you can get them.Ideale motor voor de grote kopters van formaat S800
Fitted 6 of these to an Tarot T810, running Tarot 1552 plastic folders, Plush 45amp ESC,
Wookong M, Multistar 6s 6600 battery. Get 20 minutes cruising around no load, happy with these motors.